Hy everybody.
after installing Apache(Apache 1.3.9), mod_ssl,( mod_ssl 2.4.10) on
a Solaris 2.6 i activate the client certification and the problem was
that my server turn so slowly.
The problem is that my server request the certificate many times no
only on the inicial step of negotiation.
Can anybody help me to configure the apache Server for no to ask so
many times the client certificate?
my httpd.conf is :
##
## SSL Virtual Host Context
##
<VirtualHost _default_:443>
# General setup for the virtual host
DocumentRoot "/software/apache139/htdocs"
ServerName xxxxxxxxxx
ServerAdmin xxxxxxxxxx
ErrorLog logs/error_log
TransferLog logs/access_log
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
SSLProtocol all
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
#SSLCipherSuite ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
SSLCipherSuite ALL:!ADH:RC4+RSA:-HIGH:-MEDIUM:+LOW:+SSLv2:+EXP
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. A test
# certificate can be generated with `make certificate' under
# built time. Keep in mind that if you've both a RSA and a DSA
# certificate you can configure both in parallel (to also allow
# the use of DSA ciphers, etc.)
SSLCertificateFile
/export/home/ximo/apache-ssl/apache_1.3.9/conf/ssl.crt/ximo.crt
#SSLCertificateFile
/export/home/ximo/apache-ssl/apache_1.3.9/conf/ssl.crt/server-dsa.crt
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile
/export/home/ximo/apache-ssl/apache_1.3.9/conf/ssl.key/server.key
#SSLCertificateKeyFile
/export/home/ximo/apache-ssl/apache_1.3.9/conf/ssl.key/server-dsa.key
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
SSLCertificateChainFile
/export/home/ximo/apache-ssl/apache_1.3.9/conf/ssl.crt/server.crt
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath
/export/home/ximo/apache-ssl/apache_1.3.9/conf/ssl.crt
#SSLCACertificateFile
/export/home/ximo/apache-ssl/apache_1.3.9/conf/ssl.crt/ca-bundle.crt
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath
/export/home/ximo/apache-ssl/apache_1.3.9/conf/ssl.crl
#SSLCARevocationFile
/export/home/ximo/apache-ssl/apache_1.3.9/conf/ssl.crl/ca-bundle.crl
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
SSLVerifyClient require
SSLVerifyDepth 1
SSLCACertificateFile conf/ssl.crt/ca.crt
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)-/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means
that
# the standard Auth/DBMAuth methods can be used for access control.
The
# user name is the `one line' version of the client's X.509
certificate.
# Note that no password is obtained from the user. Every entry in
the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT
and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the
certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment
variables.
# Per default this exportation is switched off for performance
reasons,
# because the extraction step is an expensive operation and is
usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o CompatEnvVars:
# This exports obsolete environment variables for backward
compatibility
# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x.
Use this
# to provide compatibility to existing CGI scripts.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied
even
# under a "Satisfy any" situation, i.e. when it applies access is
denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when
SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
SSLOptions +StdEnvVars +ExportCertData +OptRenegotiate
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't
wait for
# the close notify alert from client. When you need a different
shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed,
i.e. no
# SSL close notify alert is send or allowed to received. This
violates
# the SSL/TLS standard but is needed for some brain-dead browsers.
Use
# this when you receive I/O errors because of the standard approach
where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed,
i.e. a
# SSL close notify alert is send and mod_ssl waits for the close
notify
# alert of the client. This is 100% SSL/TLS standard compliant, but
in
# practice often causes hanging connections with brain-dead
browsers. Use
# this only for browsers where you know that their SSL
implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for
this.
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog logs/ssl_request_log \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</VirtualHost>
</IfDefine>
<IfModule mod_jrun.c>
JRunConfig Verbose false
JRunConfig ProxyHost 127.0.0.1
JRunConfig ProxyPort 8081
JRunConfig Timeout 300
JRunConfig Mappings
"/software/jrun/jsm-default/services/jse/properties/rules.properties"
</IfModule>
***************************
Thanks in advanced...
begin:vcard
n:Garcia i Ortells;Joaquim
tel;cell:649433537
tel;fax:963939901
tel;home:609057933
tel;work:963939943
x-mozilla-html:FALSE
org:Tissat SA;Sistemes
version:2.1
email;internet:[EMAIL PROTECTED]
adr;quoted-printable:;;Av Arag=F3 30 =0D=0APlanta 5=0D=0A;Ciutat de Val�ncia;Vl�ncia;46021;SPAIN
fn:Joaquim Garcia i Ortells
end:vcard
