As already mentioned, run the command:
mod_wsgi-express module-config
after mod_wsgi is installed and it will tell you the LoadModule line to use, as
well as directives for LoadFile and WSGIPythonHome which ensure correct Python
is used.
There isn’t a need to copy the mod_wsgi.so file into place. the directives from
that command will set things up to use it from where it is installed.
So run the command. Let me know what it shows so can verify that I think it
looks good.
Graham
> On 31 Dec 2016, at 8:11 AM, ANANDA SHANKAR DAS <[email protected]> wrote:
>
> Graham,
>
> Thanks for pointing that out, I dont know how I ended up using
> 32 bit version of python 3.4. Anyway I corrected that and I ran the
> command you gave me earlier, please find the output attached.
>
> I guess I need to find the mod_wsgi.so and copy it in the module dir
> and make the following changes in conf file
>
> LoadModule wsgi_module modules/mod_wsgi.so
> <VirtualHost *>
> WSGIScriptAlias /index
> C:\Users\Administrator\r_web\RosterWeb\RosterWeb\Roster.wsgi
> <Directory C:\Users\Administrator\r_web\RosterWeb\RosterWeb\>
> Order deny,allow
> Require all granted
> </Directory>
> </VirtualHost>
>
> Right ?
>
>
>
> On Saturday, December 31, 2016 at 2:13:55 AM UTC+5:30, Graham Dumpleton wrote:
> Are you sure you have installed same architecture for both Python and Apache?
>
> That is, that they are both 64 bit?
>
> Are you sure Python isn’t the 32 bit version?
>
> Graham
>
>> On 31 Dec 2016, at 7:38 AM, ANANDA SHANKAR DAS <[email protected]
>> <javascript:>> wrote:
>>
>> Please find the complete output attached
>>
>> On Saturday, December 31, 2016 at 2:00:57 AM UTC+5:30, ANANDA SHANKAR DAS
>> wrote:
>> I have downloaded apache 2.2 from
>> https://www.apachelounge.com/download/win64/
>> <https://www.apachelounge.com/download/win64/>
>>
>> In C:\Apache2\lib I have
>>
>> C:\Apache2\lib>dir
>> Volume in drive C has no label.
>> Volume Serial Number is 2806-D34A
>>
>> Directory of C:\Apache2\lib
>>
>> 30/12/2016 11:58 <DIR> .
>> 30/12/2016 11:58 <DIR> ..
>> 30/12/2016 11:58 1,921,920 apr-1.lib
>> 30/12/2016 11:58 1,199,734 aprutil-1.lib
>> 30/12/2016 11:58 62,526 libapr-1.exp
>> 30/12/2016 11:58 103,936 libapr-1.lib
>> 30/12/2016 11:58 3,929 libapriconv-1.exp
>> 30/12/2016 11:58 7,404 libapriconv-1.lib
>> 30/12/2016 11:58 38,621 libaprutil-1.exp
>> 30/12/2016 11:58 64,916 libaprutil-1.lib
>> 30/12/2016 11:58 60,508 libhttpd.exp
>> 30/12/2016 11:58 99,028 libhttpd.lib
>> 30/12/2016 11:58 9,775 mod_dav.exp
>> 30/12/2016 11:58 16,660 mod_dav.lib
>> 30/12/2016 11:58 600,878 xml.lib
>> 13 File(s) 4,189,835 bytes
>> 2 Dir(s) 1,870,245,888 bytes free
>>
>> Its a long output, the tail is as follows
>>
>> coreboard_process@4 referenced in function _wsgi_server_metrics
>> wsgi_metrics.obj : error LNK2019: unresolved external symbol
>> __imp__ap_exist
>> s_scoreboard_image@0 referenced in function _wsgi_server_metrics
>> wsgi_thread.obj : error LNK2019: unresolved external symbol
>> __imp__apr_threa
>> dkey_private_set@8 referenced in function _wsgi_thread_info
>> wsgi_thread.obj : error LNK2019: unresolved external symbol
>> __imp__apr_threa
>> dkey_private_get@8 referenced in function _wsgi_thread_info
>> build\lib.win32-3.4\mod_wsgi\server\mod_wsgi.pyd : fatal error LNK1120:
>> 103
>> unresolved externals
>> error: command 'C:\\Program <> Files (x86)\\Microsoft <> Visual Studio
>> 10.0\\VC\\B
>> IN\\link.exe' failed with exit status 1120
>> error
>> Cleaning up...
>> Removing source in
>> C:\Users\ADMINI~1\AppData\Local\Temp\2\pip-epmtkelp-build
>> Command "c:\users\administrator\envs\r_web\scripts\python.exe -u -c "import
>> setu
>> ptools, tokenize;__file__='C:\\Users\\
>> <>ADMINI~1\\AppData\\Local\\Temp\\2\\pip-epm
>> tkelp-build\\setup.py';f=getattr(tokenize, 'open',
>> open)(__file__);code=f.read()
>> .replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))"
>> install
>> --record
>> C:\Users\ADMINI~1\AppData\Local\Temp\2\pip-1w7syfk4-record\install-reco
>> rd.txt --single-version-externally-managed --compile --install-headers
>> c:\users\
>> administrator\envs\r_web\include\site\python3.4\mod-wsgi" failed with error
>> code
>> 1 in C:\Users\ADMINI~1\AppData\Local\Temp\2\pip-epmtkelp-build\
>> Exception information:
>> Traceback (most recent call last):
>> File
>> "c:\users\administrator\envs\r_web\lib\site-packages\pip\basecommand.py",
>> line 215, in main
>> status = self.run(options, args)
>> File
>> "c:\users\administrator\envs\r_web\lib\site-packages\pip\commands\install
>> .py", line 342, in run
>> prefix=options.prefix_path,
>> File
>> "c:\users\administrator\envs\r_web\lib\site-packages\pip\req\req_set.py",
>> line 784, in install
>> **kwargs
>> File
>> "c:\users\administrator\envs\r_web\lib\site-packages\pip\req\req_install.
>> py", line 878, in install
>> spinner=spinner,
>> File
>> "c:\users\administrator\envs\r_web\lib\site-packages\pip\utils\__init__.p
>> y", line 707, in call_subprocess
>> % (command_desc, proc.returncode, cwd))
>> pip.exceptions.InstallationError: Command
>> "c:\users\administrator\envs\r_web\scr
>> ipts\python.exe -u -c "import setuptools, tokenize;__file__='C:\\Users\\
>> <>ADMINI~1
>> \\AppData\\Local\\Temp\\2\\
>> <>pip-epmtkelp-build\\setup.py';f=getattr(tokenize, 'op
>> en', open)(__file__);code=f.read().replace('\r\n',
>> '\n');f.close();exec(compile(
>> code, __file__, 'exec'))" install --record
>> C:\Users\ADMINI~1\AppData\Local\Temp\
>> 2\pip-1w7syfk4-record\install-record.txt --single-version-externally-managed
>> --c
>> ompile --install-headers
>> c:\users\administrator\envs\r_web\include\site\python3.
>> 4\mod-wsgi" failed with error code 1 in
>> C:\Users\ADMINI~1\AppData\Local\Temp\2\p
>> ip-epmtkelp-build\
>>
>>
>> On Saturday, December 31, 2016 at 1:42:40 AM UTC+5:30, Graham Dumpleton
>> wrote:
>> Where did you get this Apache 2 binary package from? What site?
>>
>> Can you run with:
>>
>> pip install -v https://github.com/Gr
>> <https://github.com/Gr>ahamDumpleton/mod_wsgi/archive/develop.zip
>>
>> The -v option will show the actual compiler commands and output.
>>
>> I need to see the main link like from the compilation.
>>
>> Also, what is in the directory:
>>
>> c:\Apache2\lib
>>
>> Graham
>>
>>> On 31 Dec 2016, at 5:21 AM, ANANDA SHANKAR DAS <[email protected] <>> wrote:
>>>
>>> HI Graham,
>>>
>>> I installed Visual Studio 10 Professional , with that its a
>>> different error:
>>>
>>> slate_name@16 referenced in function _wsgi_register_hooks
>>> mod_wsgi.obj : error LNK2019: unresolved external symbol
>>> __imp__ap_hook_chil
>>> d_init@16 referenced in function _wsgi_register_hooks
>>> mod_wsgi.obj : error LNK2019: unresolved external symbol
>>> __imp__ap_hook_post
>>> _config@16 referenced in function _wsgi_register_hooks
>>> wsgi_apache.obj : error LNK2019: unresolved external symbol
>>> __imp__apr_conv_
>>> utf8_to_ucs2@16 referenced in function _wsgi_utf8_to_unicode_path
>>> wsgi_buckets.obj : error LNK2001: unresolved external symbol
>>> _apr_bucket_sha
>>> red_copy
>>> wsgi_buckets.obj : error LNK2001: unresolved external symbol
>>> _apr_bucket_sha
>>> red_split
>>> wsgi_buckets.obj : error LNK2019: unresolved external symbol
>>> __imp__apr_buck
>>> et_free referenced in function _wsgi_python_bucket_destroy
>>> wsgi_buckets.obj : error LNK2019: unresolved external symbol
>>> __imp__apr_buck
>>> et_shared_destroy@4 referenced in function _wsgi_python_bucket_destroy
>>> wsgi_buckets.obj : error LNK2019: unresolved external symbol
>>> __imp__apr_buck
>>> et_shared_make@20 referenced in function _wsgi_apr_bucket_python_make
>>> wsgi_buckets.obj : error LNK2019: unresolved external symbol
>>> __imp__apr_buck
>>> et_alloc referenced in function _wsgi_apr_bucket_python_make
>>> wsgi_interp.obj : error LNK2019: unresolved external symbol
>>> __imp__ap_get_se
>>> rver_built@0 referenced in function _newInterpreterObject
>>> wsgi_interp.obj : error LNK2019: unresolved external symbol
>>> __imp__ap_get_se
>>> rver_description@0 referenced in function _newInterpreterObject
>>> wsgi_metrics.obj : error LNK2019: unresolved external symbol
>>> __imp__ap_get_s
>>> coreboard_worker@8 referenced in function _wsgi_server_metrics
>>> wsgi_metrics.obj : error LNK2019: unresolved external symbol
>>> __imp__ap_get_s
>>> coreboard_process@4 referenced in function _wsgi_server_metrics
>>> wsgi_metrics.obj : error LNK2019: unresolved external symbol
>>> __imp__ap_exist
>>> s_scoreboard_image@0 referenced in function _wsgi_server_metrics
>>> wsgi_thread.obj : error LNK2019: unresolved external symbol
>>> __imp__apr_threa
>>> dkey_private_set@8 referenced in function _wsgi_thread_info
>>> wsgi_thread.obj : error LNK2019: unresolved external symbol
>>> __imp__apr_threa
>>> dkey_private_get@8 referenced in function _wsgi_thread_info
>>> build\lib.win32-3.4\mod_wsgi\server\mod_wsgi.pyd : fatal error LNK1120:
>>> 103
>>> unresolved externals
>>> error: command 'C:\\Program <> Files (x86)\\Microsoft <> Visual Studio
>>> 10.0\\VC\\B
>>> IN\\link.exe' failed with exit status 1120
>>>
>>> ----------------------------------------
>>> Command "c:\users\administrator\envs\r_web\scripts\python.exe -u -c "import
>>> setu
>>> ptools,
>>> tokenize;__file__='C:\\Users\\ADMINI~1\\AppData\\Local\\Temp\\2\\pip-2sr <>
>>> owup3-build\\setup.py';f=getattr(tokenize, 'open',
>>> open)(__file__);code=f.read()
>>> .replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))"
>>> install
>>> --record
>>> C:\Users\ADMINI~1\AppData\Local\Temp\2\pip-d76aqi9c-record\install-reco
>>> rd.txt --single-version-externally-managed --compile --install-headers
>>> c:\users\
>>> administrator\envs\r_web\include\site\python3.4\mod-wsgi" failed with error
>>> code
>>> 1 in C:\Users\ADMINI~1\AppData\Local\Temp\2\pip-2srowup3-build\
>>>
>>>
>>> On Friday, December 30, 2016 at 5:32:53 PM UTC+5:30, ANANDA SHANKAR DAS
>>> wrote:
>>> Just to add that I am using the vc10 version of apache 2.2
>>>
>>> On Friday, December 30, 2016 at 4:54:20 PM UTC+5:30, ANANDA SHANKAR DAS
>>> wrote:
>>> Tried the same as mentioned in the error below, still same.
>>>
>>>
>>> Whatever mentioned in error has been installed .
>>>
>>>
>>> <https://lh3.googleusercontent.com/-Dc3EBu-gNnU/WGZD3WXmXYI/AAAAAAAAERs/BNjgFO037SUMNPDlFx9KSgOYPE9s3_QsgCLcB/s1600/vc.jpg>
>>>
>>>
>>>
>>> (r_web) C:\Users\Administrator\r_web\RosterWeb>pip install
>>> https://github.com/Gr <https://github.com/Gr>
>>> ahamDumpleton/mod_wsgi/archive/develop.zip
>>> Collecting https://github.com/GrahamDumpleton/mod_wsgi/archive/develop.zip
>>> <https://github.com/GrahamDumpleton/mod_wsgi/archive/develop.zip>
>>> Downloading
>>> https://github.com/GrahamDumpleton/mod_wsgi/archive/develop.zip
>>> <https://github.com/GrahamDumpleton/mod_wsgi/archive/develop.zip> (7
>>> 83kB)
>>> 100% |################################| 788kB 504kB/s
>>> Installing collected packages: mod-wsgi
>>> Running setup.py install for mod-wsgi ... error
>>> Complete output from command
>>> c:\users\administrator\envs\r_web\scripts\pytho
>>> n.exe -u -c "import setuptools, tokenize;__file__='C:\\Users\\
>>> <>ADMINI~1\\AppData\
>>> \Local\\Temp\\2\\pip-jani9ah8-build\\setup.py';f=getattr(tokenize, 'open',
>>> open)
>>> (__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code,
>>> __fi
>>> le__, 'exec'))" install --record
>>> C:\Users\ADMINI~1\AppData\Local\Temp\2\pip-jbgq
>>> 6g2n-record\install-record.txt --single-version-externally-managed
>>> --compile --i
>>> nstall-headers
>>> c:\users\administrator\envs\r_web\include\site\python3.4\mod-wsgi
>>> :
>>> c:\python34\Lib\distutils\dist.py:260: UserWarning: Unknown
>>> distribution opt
>>> ion: 'bugtrack_url'
>>> warnings.warn(msg)
>>> running install
>>> running build
>>> running build_py
>>> creating build
>>> creating build\lib.win32-3.4
>>> creating build\lib.win32-3.4\mod_wsgi
>>> copying src\__init__.py -> build\lib.win32-3.4\mod_wsgi
>>> creating build\lib.win32-3.4\mod_wsgi\server
>>> copying src\server\apxs_config.py -> build\lib.win32-3.4\mod_wsgi\server
>>> copying src\server\environ.py -> build\lib.win32-3.4\mod_wsgi\server
>>> copying src\server\__init__.py -> build\lib.win32-3.4\mod_wsgi\server
>>> creating build\lib.win32-3.4\mod_wsgi\server\management
>>> copying src\server\management\__init__.py ->
>>> build\lib.win32-3.4\mod_wsgi\se
>>> rver\management
>>> creating build\lib.win32-3.4\mod_wsgi\server\management\commands
>>> copying src\server\management\commands\runmodwsgi.py ->
>>> build\lib.win32-3.4\
>>> mod_wsgi\server\management\commands
>>> copying src\server\management\commands\__init__.py ->
>>> build\lib.win32-3.4\mo
>>> d_wsgi\server\management\commands
>>> creating build\lib.win32-3.4\mod_wsgi\docs
>>> copying docs\_build\html\__init__.py ->
>>> build\lib.win32-3.4\mod_wsgi\docs
>>> creating build\lib.win32-3.4\mod_wsgi\images
>>> copying images\__init__.py -> build\lib.win32-3.4\mod_wsgi\images
>>> copying images\snake-whiskey.jpg -> build\lib.win32-3.4\mod_wsgi\images
>>> running build_ext
>>> building 'mod_wsgi.server.mod_wsgi' extension
>>> error: Microsoft Visual C++ 10.0 is required. Get it with "Microsoft
>>> Windows
>>> SDK 7.1": www.microsoft.com/download/details.aspx?id=8279
>>> <http://www.microsoft.com/download/details.aspx?id=8279>
>>>
>>> ----------------------------------------
>>> Command "c:\users\administrator\envs\r_web\scripts\python.exe -u -c "import
>>> setu
>>> ptools, tokenize;__file__='C:\\Users\\
>>> <>ADMINI~1\\AppData\\Local\\Temp\\2\\pip-jan
>>> i9ah8-build\\setup.py';f=getattr(tokenize, 'open',
>>> open)(__file__);code=f.read()
>>> .replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))"
>>> install
>>> --record
>>> C:\Users\ADMINI~1\AppData\Local\Temp\2\pip-jbgq6g2n-record\install-reco
>>> rd.txt --single-version-externally-managed --compile --install-headers
>>> c:\users\
>>> administrator\envs\r_web\include\site\python3.4\mod-wsgi" failed with error
>>> code
>>> 1 in C:\Users\ADMINI~1\AppData\Local\Temp\2\pip-jani9ah8-build\
>>>
>>> On Friday, December 30, 2016 at 4:09:49 PM UTC+5:30, Graham Dumpleton wrote:
>>> Try doing the exact same thing but with Python 3.4.
>>>
>>> So long as you have the compiler installed and can install using pip any
>>> Python packages with C extensions, then technically you can use ‘pip
>>> install mod_wsgi’ to get the mod_wsgi module built, even if I haven’t
>>> myself tried it.
>>>
>>> From memory Python 3.4 uses VC10, so if can, Apache should also be compiled
>>> with VC10 to avoid mixing ABI versions for objects.
>>>
>>> Graham
>>>
>>>> On 30 Dec 2016, at 9:35 PM, ANANDA SHANKAR DAS <[email protected] <>>
>>>> wrote:
>>>>
>>>> Yes, tried that got the same error. Now I downgraded to python
>>>> 3.4.3 since few packages in the build tool didnot install and
>>>> I had to skip it. Found out in some forums that I need to install
>>>> Visual Studio 2015. But its incompatible to windows server 2008, so
>>>> downgraded to python 3.4 Could you please help me with the
>>>> mod_wsgi for this
>>>>
>>>> On Friday, December 30, 2016 at 3:44:37 PM UTC+5:30, Graham Dumpleton
>>>> wrote:
>>>> You need to have installed the VC14 compiler on the system.
>>>>
>>>> See:
>>>>
>>>>
>>>> https://wiki.python.org/moin/WindowsCompilers#Microsoft_Visual_C.2B-.2B-_14.0_standalone:_Visual_C.2B-.2B-_Build_Tools_2015_.28x86.2C_x64.2C_ARM.29
>>>>
>>>> <https://wiki.python.org/moin/WindowsCompilers#Microsoft_Visual_C.2B-.2B-_14.0_standalone:_Visual_C.2B-.2B-_Build_Tools_2015_.28x86.2C_x64.2C_ARM.29>
>>>>
>>>> Have you done that?
>>>>
>>>> Graham
>>>>
>>>>> On 30 Dec 2016, at 9:01 PM, ANANDA SHANKAR DAS <asda...@ <>gmail.com
>>>>> <http://gmail.com/>> wrote:
>>>>>
>>>>> Hi Graham,
>>>>>
>>>>> I tried your steps , I get the error as follows:
>>>>>
>>>>> (r_web) C:\Users\Administrator\r_web\RosterWeb>pip install
>>>>> https://github.com/Gr <https://github.com/Gr>
>>>>> ahamDumpleton/mod_wsgi/archive/develop.zip
>>>>> Collecting
>>>>> https://github.com/GrahamDumpleton/mod_wsgi/archive/develop.zip
>>>>> <https://github.com/GrahamDumpleton/mod_wsgi/archive/develop.zip>
>>>>> Downloading
>>>>> https://github.com/GrahamDumpleton/mod_wsgi/archive/develop.zip
>>>>> <https://github.com/GrahamDumpleton/mod_wsgi/archive/develop.zip> (7
>>>>> 83kB)
>>>>> 100% |################################| 788kB 328kB/s
>>>>> Installing collected packages: mod-wsgi
>>>>> Running setup.py install for mod-wsgi ... error
>>>>> Complete output from command
>>>>> c:\users\administrator\envs\r_web\scripts\pytho
>>>>> n.exe -u -c "import setuptools, tokenize;__file__='C: <>\\Users\\
>>>>> <>ADMINI~1\\AppData\ <>
>>>>> \Local\\Temp\\2\\pip-5h4juafu-build\\setup.py';f=getattr(tokenize,
>>>>> 'open', open)
>>>>> (__file__);code=f.read().replace('\r\n',
>>>>> '\n');f.close();exec(compile(code, __fi
>>>>> le__, 'exec'))" install --record
>>>>> C:\Users\ADMINI~1\AppData\Local\Temp\2\pip-zt11
>>>>> 8dzx-record\install-record.txt --single-version-externally-managed
>>>>> --compile --i
>>>>> nstall-headers
>>>>> c:\users\administrator\envs\r_web\include\site\python3.5\mod-wsgi
>>>>> :
>>>>> c:\python35\Lib\distutils\dist.py:261: UserWarning: Unknown
>>>>> distribution opt
>>>>> ion: 'bugtrack_url'
>>>>> warnings.warn(msg)
>>>>> running install
>>>>> running build
>>>>> running build_py
>>>>> creating build
>>>>> creating build\lib.win-amd64-3.5
>>>>> creating build\lib.win-amd64-3.5\mod_wsgi
>>>>> copying src\__init__.py -> build\lib.win-amd64-3.5\mod_wsgi
>>>>> creating build\lib.win-amd64-3.5\mod_wsgi\server
>>>>> copying src\server\apxs_config.py ->
>>>>> build\lib.win-amd64-3.5\mod_wsgi\server
>>>>>
>>>>> copying src\server\environ.py ->
>>>>> build\lib.win-amd64-3.5\mod_wsgi\server
>>>>> copying src\server\__init__.py ->
>>>>> build\lib.win-amd64-3.5\mod_wsgi\server
>>>>> creating build\lib.win-amd64-3.5\mod_wsgi\server\management
>>>>> copying src\server\management\__init__.py ->
>>>>> build\lib.win-amd64-3.5\mod_wsg
>>>>> i\server\management
>>>>> creating build\lib.win-amd64-3.5\mod_wsgi\server\management\commands
>>>>> copying src\server\management\commands\runmodwsgi.py ->
>>>>> build\lib.win-amd64-
>>>>> 3.5\mod_wsgi\server\management\commands
>>>>> copying src\server\management\commands\__init__.py ->
>>>>> build\lib.win-amd64-3.
>>>>> 5\mod_wsgi\server\management\commands
>>>>> creating build\lib.win-amd64-3.5\mod_wsgi\docs
>>>>> copying docs\_build\html\__init__.py ->
>>>>> build\lib.win-amd64-3.5\mod_wsgi\doc
>>>>> s
>>>>> creating build\lib.win-amd64-3.5\mod_wsgi\images
>>>>> copying images\__init__.py -> build\lib.win-amd64-3.5\mod_wsgi\images
>>>>> copying images\snake-whiskey.jpg ->
>>>>> build\lib.win-amd64-3.5\mod_wsgi\images
>>>>> running build_ext
>>>>> building 'mod_wsgi.server.mod_wsgi' extension
>>>>> creating build\temp.win-amd64-3.5
>>>>> creating build\temp.win-amd64-3.5\Release
>>>>> creating build\temp.win-amd64-3.5\Release\src
>>>>> creating build\temp.win-amd64-3.5\Release\src\server
>>>>> cl.exe /c /nologo /Ox /W3 /GL /DNDEBUG /MD -Ic:\Apache2/include
>>>>> -Ic:\python3
>>>>> 5\include -Ic:\python35\include /Tcsrc/server\mod_wsgi.c
>>>>> /Fobuild\temp.win-amd64
>>>>> -3.5\Release\src/server\mod_wsgi.obj
>>>>> error: command 'cl.exe' failed: No such file or directory
>>>>>
>>>>> ----------------------------------------
>>>>> Command "c:\users\administrator\envs\r_web\scripts\python.exe -u -c
>>>>> "import setu
>>>>> ptools, tokenize;__file__='C: <>\\Users\\ <>ADMINI~1\\AppData\\Local\\
>>>>> <>Temp\\2\\pip-5h4 <>
>>>>> juafu-build\\setup.py';f=getattr(tokenize, 'open',
>>>>> open)(__file__);code=f.read()
>>>>> .replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))"
>>>>> install
>>>>> --record
>>>>> C:\Users\ADMINI~1\AppData\Local\Temp\2\pip-zt118dzx-record\install-reco
>>>>> rd.txt --single-version-externally-managed --compile --install-headers
>>>>> c:\users\
>>>>> administrator\envs\r_web\include\site\python3.5\mod-wsgi" failed with
>>>>> error code
>>>>> 1 in C:\Users\ADMINI~1\AppData\Local\Temp\2\pip-5h4juafu-build\
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Friday, December 30, 2016 at 12:34:38 PM UTC+5:30, ANANDA SHANKAR DAS
>>>>> wrote:
>>>>> Graham,
>>>>>
>>>>> I could not make it to work. Using Apache 2.2 is a production
>>>>> requirement. I will try to sort this out. Thanks for helping me in
>>>>> understanding the issue.
>>>>>
>>>>> On Friday, December 30, 2016 at 9:35:38 AM UTC+5:30, Graham Dumpleton
>>>>> wrote:
>>>>> BTW, where are you even finding an Apache binary which has been compiled
>>>>> with VC14 compiler.
>>>>>
>>>>> The latest I know of is compiled for VC10. As Python 3.5 requires VC14
>>>>> compiler, there is no guarantee that Apache 2.2 compiled for VC10 will
>>>>> work.
>>>>>
>>>>> Why must you use Apache 2.2? Why can’t you use Apache 2.4?
>>>>>
>>>>> Graham
>>>>>
>>>>>> On 30 Dec 2016, at 8:27 AM, Graham Dumpleton <[email protected] <>>
>>>>>> wrote:
>>>>>>
>>>>>> Try:
>>>>>>
>>>>>> set MOD_WSGI_APACHE_ROOTDIR="c:\\Apache22 <>
>>>>>>
>>>>>> I don’t know how backslashes are handled in Windows environment
>>>>>> variables and whether they need to be escaped.
>>>>>>
>>>>>> Also ensure you are setting the correct path to where your Ap
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "modwsgi" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected]
> <mailto:[email protected]>.
> To post to this group, send email to [email protected]
> <mailto:[email protected]>.
> Visit this group at https://groups.google.com/group/modwsgi
> <https://groups.google.com/group/modwsgi>.
> For more options, visit https://groups.google.com/d/optout
> <https://groups.google.com/d/optout>.
> <mod_wsgi_output_sucess.txt>
--
You received this message because you are subscribed to the Google Groups
"modwsgi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/modwsgi.
For more options, visit https://groups.google.com/d/optout.
