hi paul, something like this from any good motor factors, http://www.burtonpower.com/parts-by-category/fuel-system/fuel-hose-hose-finishers/5-16-black-cotton-braided-hose-per-m-fsefh013.html
used similar on my +8,make sure of the right size,i think mine was 10mm tank end and 8mm the rad end,10mm squeezed up ok, hth, bw jeff ----- Original Message ----- From: Paul Fileman <[email protected]> To: mogtalk2 <[email protected]> Sent: Thu, 12 Jul 2012 08:38:55 -0000 (UTC) Subject: [mogtalk2] CVH - Header Tank Hose Does anybody have the specification details for the hoses people use to connect the radiator on a CVH engined car to a header tank? I have acquired an MGB Header Tank from ebay (£25 including postage – a bargain) but Moss (and their competitors) want around £7 per metre of what looks like a fairly ordinary pipe and I will need a bit more than 1m as I plan to mount the header tank on the bulkhead. Whilst £14 is not a lot of money, it does seem extortionate. Thanks in advance folks, Paul View posts on The Mail Archive http://www.mail-archive.com/[email protected]/Modify Your Subscription ------------------------------------------- View posts on The Mail Archive http://www.mail-archive.com/[email protected]/ [http://www.mail-archive.com/[email protected]/] Modify Your Subscription: https://www.listbox.com/member/?member_id=22459785&id_secret=22459785-4a39ddf8 Powered by Listbox: http://www.listbox.com
