Fixed (will be part of next release) Best regards, The M/Monit team
> On 29. 4. 2022, at 22:33, Lutz Mader <lutz.ma...@freenet.de> wrote: > > Hello Noel, > you are right. > > The syntax of your first sample should be right, see > https://mmonit.com/monit/documentation/monit.html#NETWORK-PING-TEST, > but does not fit to the p.y definitions (I think). > > Your second sample confuse me, with a look to _checkConnection (in > validate.c) the "Event_post(s, Event_Speed, State_Failed" set the status > always to failed. > >> Any guidance would be appreciated > > The responsetime does not work, you can not use this at the time. > > With regards, > Lutz > > > Am 29.04.22 um 19:06 schrieb Noel: >> FreeBSD 13.0-RELEASE-p11 >> monit-5.32.0 installed from ports >> >> I'm having trouble using the reponsetime keyword in a check host statement. >> >> If I use: >> check host example with address example >> if failed ping4 with responsetime > 250 ms then alert >> >> running "monit reload" results in "syntax error 'responsetime'" >> >> If I use the port/protocol test, it doesn't give a syntax error, but >> always fails the test. >> >> check host example with address example >> if failed port 80 protocol http and responsetime > 250 ms >> timeout 20 s >> then alert >> >> # monit status >> ... >> Remote Host 'example' >> status Speed failed >> monitoring status Monitored >> monitoring mode active >> on reboot start >> port response time 8.533 ms to example:80 type TCP/IP >> protocol HTTP >> data collected Fri, 29 Apr 2022 11:54:02 >> >> >> Any guidance would be appreciated >> >> >> -- Noel Jones >> >> >> > >