David, Before I lost my old centerboard in my M15 it would not retract all the way into the housing. It always extend below the well at a slight angle, 2 - 5 degrees. The centerboard would carry some weight on the center roller on the trailer. I thought this was normal.
When the new centerboard installed and custom fit it retracts almost all the way into the centerboard and the leading edge is exposed about 1/2 inch, parallel to the centerboard well. It is 1 inch above the roller on the trailer. My trailer roller are V shaped with a 2 inch wide 1/4 inch depression at the center. Thanks, Doug "Seas the Day" --- David Rossi <[EMAIL PROTECTED]> wrote: > I assume that if my old centerboard fit nicely into > the space that a new one > would too. They should be the same size, right. So > on a boat that had the > issue of a new centerboard not fitting, how did the > old one fit? > > > > > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats __________________________________________________ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/ _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
