Thanks, Dale. Yes, I would like to see a picture, if it isn't too much trouble. Cherri ---------- >From: Dale Williams <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Subject: Re: M_Boats: m-15 pivot pin >Date: Fri, Apr 12, 2002, 11:39 PM >
>Cherri: > >I had a centerboard made from steel and will want to drop it out for >inspection from time to time. Since I don't want to monkey around with epoxy >each time, I cut a pin to the width of the keel and had the ends tapped. >Allen bolts inserted through caps screw into each end of the pin and hold in >place. John, who made my board and the pin set-up said that he would be glad >to make pins for anyone who was interested for ( I would have to check with >him in case I am remembering wrong) $20, shipping included. If you are >interested I can take a picture of my keel with the pin in it and post it on >the web for you. > >Dale Williams >Staples, MN >M-15 #185 "Sophie Mae" > > >_______________________________________________ >http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
