Is this anything like the DAP insulating foam you can find in cans at any hardware store?
----- Original Message ----- From: "Steve R." <[EMAIL PROTECTED]> To: "For and about Montgomery Sailboats" <[EMAIL PROTECTED]> Sent: Tuesday, August 12, 2003 9:54 AM Subject: Deck hole repairs I have not done this, but ShipShape TV used a two part foam to fill a void in a fiberglass hard top. Obviously you have to make sure the foam does not squeeze the deck apart. The drawback to this method is a two quart supply costs $80 at West Marine, which makes two cubic feet of foam. (Everclear brand). I found a reference to a $25 product at jamestowndistributors.com but they only list a $75 two gallon product - "Dura-Cote". Has anyone used a foam? steve Steve R. M-15 #119 Lexington, KY --- "Jon Martin" <[EMAIL PROTECTED]> wrote: I repaired the centerboard problem on my M15, and have now had two great sails. Thanks for the advice from this group. Now how about repairing holes in the deck - I have epoxy and several fillers. Should I use some sort of backing underneath the holes, and fill with thickened epoxy? Will the thickened epoxy not sag without any backing? Thanks, Jon _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
