Mike, A daggerboard is going to be much more prone to damage than a kick-up centerboard, isn't it? --Craig
----- Original Message ----- From: "MC Carpenter" <[EMAIL PROTECTED]> To: "For and about Montgomery Sailboats" <[EMAIL PROTECTED]> Sent: Monday, November 24, 2003 7:11 PM Subject: good picture received Mark, >From the spec sheet you sent me : the board goes down to 40 inches - 21 inches = 19 inches, and the total area is 2.65 sq ft, I am taking the mathematical center of that area and building a dagger board to fit in the slot with the same centers. Just to see if its work out before continuing with the stainless board. I'm using 1/4 plywood as a model board. It looks like I can do a positive flotation but I will lose almost 1/3 of the interior storage space. That's a lot and I wonder if there is any other way to do it. I have plenty of scrape wood around to change my mind if it does not work out. I 've said I wanted to come back in the next life as a rich stock broker, But I just learnt what the U. S. Senators make, so I'll just change my mind on that too. ;>) Mike _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
