How unfortunate that you had this problem with what is essentially a brand new boat Sandra. I too would replace all standing rigging after such an experience.
Jerry Montgomery built new wires for me last year and I'm very confident in the quality of the construction. Don't know how Bob was making up the wires, but I had Jerry use marine eye terminals instead of stainless thimbles (on the uppers). Price was very reasonable. t Tom Smith & Jane Van Winkle Sandpoint, Idaho M15-345, Chukar M17-064, Unnamed -----Original Message----- From: Seawitch [mailto:[EMAIL PROTECTED] Sent: Thursday, December 04, 2003 9:00 AM To: [EMAIL PROTECTED] Subject: M_Boats: Vacation in FL Hi all, thought I would share with you my recent experience in Fl. I trailered Seawitch down to St. Petersburg to spend the Thanksgiving week sailing on Tampa Bay. The weather was in the 80's during the day, and sunny most of the time. I launched at the Municipal boat ramp on Demens Landing in downtown St. Pete. Prior arangements got us a spot in Harborage Marina, not far from Demens. On my final sail Fri. the winds were 10-15, and predicted to be increasing as the day progressed due to a major cold front rolling in. I had full sails and we were moving along on a port tack. I decided it was time to start making way towards Demens to haul out so we tacked to starboard. My 1st mate, my 7 year old grand daughter moved from the starboard side of the boat in order to be on the high side with me. I was looking at the port side stay and before my eyes, it pinged where it enters the swedge, and from there in seconds it unraveled and the mast, boom and all the sails droped into the water on the starboard side. I hauled the whole mess up onto the boat, secured things with some of the line that was floating aroound. A large motor boat came along, and offered to tow us into the launch area. Once tied up to the dock, I was able to unravel all the line and cables and get things back in order so I could haul her out for the ride back to GA. Now, I will spend the winter working on getting the boat re rigged. I will probably replace all stays since I no longer feel like I can trust the existing rigging. This time I want to have more easily adjustable stays. As always, I appreciate your comments and the benefit of those of you who have more experience than I. ===== Time for a cool change! Sandra(Seawitch #617) __________________________________ Do you Yahoo!? Free Pop-Up Blocker - Get it now http://companion.yahoo.com/ _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats This message was scanned for viruses!! _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
