Gotta see that pictur Doug. --Larry #189
-----Original Message-----
From: Doug Kelch [mailto:[EMAIL PROTECTED]
Sent: Friday, July 02, 2004 7:24 AM
To: Montgomery
Subject: M_Boats: Neat Traveler arrangement
I was watching the Penguin racing fleet come in the
last night an notice a very clever arrangement for a
small boat traveler that may be cheap and effective
for an M15.
I may mock one up and take a picture if the
description doesn't work .
Essentially it is a continuous loop of line with symmetricallylly located
fixed attachmentent points, one for a mainsheet block (single block only)
and one for a control line. The block attachment point will be over the
tiller and the attachment point for the control line will be under the
tiller.
Place a flush mounted block on the forward face of the
transom at the two corners inside of where the current
traveler line currently goes through the transom
corners.
The traveler line (will become the continuous loop)
runs through the the first block, over the tiller,
through the second block, under the tiller and ties
off to bitter end. The knot under the tiller can form
the attachment point for the control line.
Form the attachment point for the mainsheet block
directly over the tiller while the attachment point
for the control line is directly under the tiller.
Attach the control line (and fairleads) and lead it to convenient cleating
point.
To move the traveler out, ease off the control line,
and to move the traveler in you pull the control line
in.
This is definitely worth a try!
Thanks
Doug Kelch
"Seas the Day"
M15
__________________________________
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!
http://promotions.yahoo.com/new_mail
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
