The penatrol will give you a nice satin sheen, but you'll still need to
remove the oxidation first on that dark hull.  Penatrol seems to "treat"
the gel coat, like Armour All on vinyl, restoring the original luster. 
To get a real high gloss shine, there's no substitute for buffing,
polishing, and waxing.  Penatrol is just a lot easier, but the key is
still the prep work.  Although Tullamore's hull looks great in pictures,
there are some blotchy areas where the deeper oxidation wasn't removed
completely. As soon as the weather warms enough, I'll be wet sanding and
then rebuffing the hull to take care of that, along with patching some
nicks in the gel coat.
Larry

On Mon, 20 Dec 2004 22:31:30 -0500 "Craig F. Honshell"
<[EMAIL PROTECTED]> writes:
> 
> Thanks, Craig.
> 
> Looking forward to those pics.  The buff deck sounds great, too!
> 
> Thanks for the compliments.  I'm glad you're enjoying the M-List.
> 
> Per its leading proponent, Larry Yake, you may want to try the paint 
> additive
> Penetrol to bring back your hull's shine.  It should be used 
> carefully:  You'd
> probably want to read some posts about it on the M-List archives 
> before using it.
> 
> Larry has used Penetrol very successfully on his '76 Monty, 
> Tullamore:  Her hull
> looks new and she's one of the prettiest M17's sailing . . .
> http://www.funtigo.com/MSOG?b=197153&c=1789789&p=start
> 
> I'd eventually like a dark hull on my M17, possibly midnight blue, 
> but that will have
> to wait 'til I can afford it and that'll be a long wait . . .
> 
> Fair winds,
> 
> Craig
> 
> ----- Original Message ----- 
> From: CCW
> To: For and about Montgomery Sailboats
> Sent: Monday, December 20, 2004 9:52 AM
> Subject: Montgomery sailboat list
> 
> Hi Craig. I just bought this boat, and I don't have any pictures of 
> her yet. I'll be
> happy to share them with the group though, when I take some. She is 
> the older style
> M17 with the outboard cut out rather than a bracket. Why did they 
> change this feature
> I wonder? Probably to keep a following sea out of the boat? The 
> older way seems
> sturdier, a more solid mount, but I know these boats are supposed to 
> be able to make
> it in the ocean. She does indeed have a green hull with a buff deck 
> and cockpit, and
> appears never to have been repainted I believe it's the original gel 
> coat. I need to
> do some oxidation buffing to the hull. The darker colors do seem to 
> get that oxidized
> look sooner than the lighter ones. I had a black hulled Baja 
> speedboat once, and it
> was notorious for looking shabby by the end of one season, but she 
> sure cleaned up
> well!
> 
> I enjoyed looking at your photos of Honshell. It's obvious that you 
> have lathered
> much attention on her, and she looks amazing. It's inspiring to see 
> what can be done
> to these little boats to make them even saltier looking.
> 
> My boat has a Nissan 5 HP four stroke long shaft and that seems to 
> work well with the
> boat. I tried a 4 HP suzuki single cyl engine on it too, and it had 
> an annoying
> vibration down low. (It was a two stroke).
> 
> Enjoying the posts. What an enthusiastic group!
> 
> Craig Weagant
> 
>   ----- Original Message ----- 
>   From: Craig F. Honshell
>   To: [EMAIL PROTECTED]
>   Sent: Saturday, December 18, 2004 10:38 AM
>   Subject: Potters and Montgomerys
> 
>   Craig, Do you have digital pics of your M17?  I would very, very, 
> VERY much like to
> see a '78 M17 with a green hull!  If you'd like to see my boat, 
> you'll find her at
> this link:  http://www.funtigo.com/MSOG?b=195276&c=1789789&p=start  
> I haven't named
> her yet, so she's listed on the link as simply, "Honshell" . .   If 
> you have digital
> pics of your Monty, I don't mind large attachments, so I'd love to 
> get them at this
> address:  [EMAIL PROTECTED]   Fair winds!  --Craig F. Honshell, 
> [EMAIL PROTECTED];
> '84 M17 #389
> _______________________________________________
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
> 
> 

_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to