Bob, the reason I am asking is that my M-15 is a 1981 model (MMP151891281)
and I think the centerboard had steel in it.  I had opened up on 3 sides and
had to be extracted forceably by Morrison Marine (Mel)here is Sacramento.
It was worth it and I am glad I did it.  ---Thanks for the new centerboard
Bob,  ----Larry

-----Original Message-----
From: Bob [mailto:[EMAIL PROTECTED] 
Sent: Wednesday, December 22, 2004 12:20 PM
To: For and about Montgomery Sailboats
Subject: Re: M_Boats: Regarding the hole size in the center board


Hi Larry

We use lead on all our boats. Even in the centerboards.

Never have used steel in anything. Steel rusts and swells.

In fact all the Montgomery sailboats built after a certain date in 1987 are
LEAD.

Have a good one Larry!

Bob
(949) 489-8227

Hughston, Larry wrote:

>Bob, I received a new centerboard from you and it is installed on my 
>M-15. Since I did not ask for a lead filled CB can I assume it has 
>steel on the inside?  Are the lead filled CB's still the same total 
>weight as the steel filled ones?
>
> Thanks Bob.  ---Larry Hughston  hull# 189.
>
>-----Original Message-----
>From: Bob [mailto:[EMAIL PROTECTED]
>Sent: Wednesday, December 22, 2004 10:07 AM
>To: Norm Bundek; For and about Montgomery Sailboats
>Subject: Re: M_Boats: Regarding the hole size in the center board
>
>
>Norm
>
>You could also tape the bottom of the hole, then fill the entire space 
>with some mat fibers and epoxy to the top. After it cures, then 
>re-drill the hole with a 3/8 drill bit.
>
>In either case we do have lead filled centerboards available. These 
>will never rust or crack.
>
>Your close enough to come and get one.
>
>Fair winds
>Bob
>(949) 489-8227
>
>Norm Bundek wrote:
>
>  
>
>>I did not change the opening to the hole.  The cracks and voids were 
>>on
>>the inside.  I ended up using Bondo rather than 5 minute epoxy.  I knew 
>>that I would have to file with a rasp to the correct internal size.  
>>Epoxy would have been like working in concrete.
>>
>>Norm M15 #172
>>_______________________________________________
>>http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
>>
>> 
>>
>>    
>>
>
>
>_______________________________________________
>http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
>
>_______________________________________________
>http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
>
>  
>
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to