Craig, I use COPPER ANTI-SIEZE lubricant from Permatex.
It has worked well so far but I haven't been using it long enough to claim a good test. The stainless screws have been in the aluminum boom for 2 1/2 years - so far no signs of corosion. Thanks Doug --- "Craig F. Honshell" <[EMAIL PROTECTED]> wrote: > > I'm assuming you use that stuff on the threads to > prevent galvanic corrosion, right > Doug? What do you use? Thanks, Craig > > ----- Original Message ----- > From: Doug Kelch > To: For and about Montgomery Sailboats > Sent: Friday, July 29, 2005 4:20 PM > Subject: RE: M_Boats: Jiffy reefing system > > Sandra, > > Tod has the link correct. I did not install the > cheek > block in the picture. I did put the pad eye in front > of the cheek block in for the second reef point. I > do > not use pop rivets. I use self taping stainless > steel > screws with a corosion preventing grease on the > threads. > > Thanks > > Doug Kelch > > --- [EMAIL PROTECTED] wrote: > > > Sandra, > > > > Perhaps you are thinking of Doug Kelch's funtigo > > site? > > > > > http://www.funtigo.com/dkelch?b=215326&p=start&c=1802951 > > > > Tod > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
