Thanks Dan- this is exactly what I was looking for.  Maybe my memory is not
as bad as I thought, altho I DID have a hard time finding my home from the
pub last week---

Are you listening, Norm?

Jerry
jerrymontgomery.org

----- Original Message -----
From: "Dan Hall" <[EMAIL PROTECTED]>
To: "For and about Montgomery Sailboats"
<[email protected]>
Sent: Saturday, August 13, 2005 11:06 AM
Subject: Re: M_Boats: (no subject)


> Jerry
> The distance from the butt of the mast to the two 1/4" holes at the hounds
that the shrouds and forestay hang on is 14ft 5inches.
> The slot on the front of the mast is indeed centered 3 3/4" below the
measurement of the two side holes. Additionally, the opening for the bolt
rope is 32 to 38" from the butt.
> I measured these twice so I hope they are accurate. Let me know if they
are correct.
> Dan   M15  #468
> Redlands, California
>
> jerry <[EMAIL PROTECTED]> wrote:
> Could one of you kind M-15 owners take some mast measurements? What I need
it the distance from the butt of the mast to the two 1/4" holes at the
hounds that the shrouds and forestay hang on. Then, could you verify that
the slot on the front of the mast (that the forestays goes thru) is centered
3 3/4" below the measurement of the two side holes?
>
> Then could you verify that the opening for the bolt rope entry is 32 to
38" from the butt? That's the way I remember these things, but it was a long
time ago.
>
> Thanks very much, and please put it on the list because Norm Bundik needs
it also.
>
> Jerry
> jerrymontgomery.org
> _______________________________________________
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> _______________________________________________
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
>



_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to