Leif.
After my CB was sand blasted, belt sanded, epoxy filled and faired I
gave it two coats of Interlux Primocon underwater primer before
applying the anti-fouling paint. Board came out looking almost
reasonable.
Bill Sylvester
M-17 # 279
Endelig
On Oct 21, 2005, at 5:43 PM, [EMAIL PROTECTED] wrote:
Hello to all:
I've made good progress on bringing my M-17 back, and will be launching
before Christmas. I just got a look at the bottom 18" of the steel CB.
It looks
like it was never taken care of in any way. Severe rust. I plan to
grind and
fill with epoxy filler, but I need suggestions on what to coat the
steel with.
Coal Tar Epoxy? Red Lead? or whatever.
All of your suggestions and advice is appreciated.
Thanks,
Leif Eriksson
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
