This probably will sound silly if you've never heard it before, but it's on the up and up. Try Silly Putty or one of it's generic counterparts. I have my transducer "permanently" installed with it. Been in there for 2 seasons and has never failed. I got it at Wal-Mart (generic) for $.99! Just make sure you install it over solid f-glass and you're all set.
Lewis Baumstark West Wight Potter 15 Bristol, TN ----- Original Message ----- From: "nbundek" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, November 01, 2005 1:32 AM Subject: M_Boats: Depth and Fish Finder installation on M15 > I am installing a Piranha 15 combination fish and depth finder in the forward locker forward of the keel slope on my M15. Can anyone recommend a non permanent material to set the transducer in? I want to test it before epoxying it in place. The hull has a slight concave well just forward of the keel slope that I am going to test. Would it better to fill the well with epoxy to make a level spot or just use the attaching material to fill the well and hold the transducer in place? > > Any insights would be appreciated. > > Norm M15 #172 > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
