Gary, Quit cutting holes in my boat:- Larry Boone Gary M Hyde <[EMAIL PROTECTED]> wrote: Rick: I found with my M15 that when I cut out one of the two shallow cockpit lockers to open it to the bottom of the hull, I got quite a lot of ventilation when it and the main hatch were both partially open. I had earlier installed a Beckson Vent-o-mate in the foredeck, which gives some ventilation, but the cockpit locker gives more. --Gary Hyde Pullman, WA [EMAIL PROTECTED] M17 #637 'Hydeaway 2' M15 #235 'Vanilla' "...There's nothing quite like messing about in boats..."
On Mar 16, 2006, at 6:30 AM, Rick Langer wrote: > I'm planning to install a 12"x12" (9"x9" cutout) hatch in the > forward deck > right in front of the cabin. My intent is to increase ventilation > through > the cabin. I have considered a Nicro type vent, but prefer a > passive, no > noise option. I don't think a cowl or dorade box will work well > because the > deck is very small. I also considered cutting a port or two into > the cabin > sides, but nixed that being worried I'd weaken the roof/mast step. > > So it seems a low profile hatch is the best solution. My question is, > "Which way should I orient it?". My first thought is to have the > lid open > towards the mast. This way, at anchor, the lid would direct a > breeze down > the hatch. However, I've seen some hatches mounted the other way > like on an > M17. What's the advantage of this orientation? > > Thanks, > > Rick Langer > M15 #337 > Bluebird > > > > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
