Hello all, Would an owner of a late model M15 (one with a 19' 6" mast) measure where the 1/4" bolt for the standing rigging is drilled thru the mast, and were the center of the eye strap for the jib block mounts (from the bottom of the mast up please)? I have an early model M15 with a 19" mast. See "msogphotosite, Maintenance and Mods, M15, Spar Specs" to view the measurements I took off my boat. I plan on raising this bolt and the jib block as part of a project to get my new sails (made to the published I J P E specs) to fit the boat. The new sails are taller than the original "McKibben's.Of course I'll have to buy a longer longer forestay and shroulds, those measurements would come in handy too. I wonder, do the new M15's now have a Mast Hound with tangs and jib block? If so, I'd appreciate any pictures of this arrangement if someone could email them to me. Regards, George Morrison '85 M15 #319 San Jose, CA _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
