John, Good luck with your delivery. Has North said what the delivery is on your sails?
They sound good, although I couldn't say about the roller furling as I'm not a fan of it. I have four headsails: 155%, 109%, 80%, and storm jib. I've only used the storm jib two or three times, so you could say that almost all of my sailing is done with between 155-80% sails, so 135 should work out real well for you. Hope to see you out at least once this fall! Tod -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] ] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, September 28, 2006 9:20 AM To: [email protected] Subject: M_Boats: M17 - #643 - "SEABISCUIT" HI ALL: WELL BOB EEG SAYS MY BOAT WILL BE READY TO SHIP BY OCTOBER 10th. I DOUBT IF I WILL BE ABLE TO GET ANY SAILING IN THIS FALL HERE ON THE GREAT LAKES. I AM GOING TO HAVE SAILS MADE LOCALLY IN VERMILION, OHIO BY NORTH. AS I INTEND TO USE THE BOAT MAINLY FOR DAY SAILING AND CRUISING I AM THINKING OF PURCHASING THE FOLLOWING FROM NORTH. 1. CDI FURLER - FF2 w BALL BEARINGS 2. MAIN: 2.1 - LOOSE FOOT 2.2 - LUFF - SAIL SLUGS - SPECIAL TYPE THAT DOES NOT BIND WHEN LOWERING 2.3 - TWO REEF POINTS 2.4 - FULL BATTON TOP - REMAINDER SHORT 2.5 - BOOM SAIL COVER 3.GENOA 3.1 - 135% - WOULD LIKE TO GO BIGGER BUT FEEL A 150% WOULD NOT FURL TO A STORM SIZE WELL. 3.2 - ROPE LUFF INSTEAD OF FOAM FOR BETTER FURLING WOULD APPRECIATE ANY COMMENTS YOU MAY HAVE. BEST REGARDS JOHN RUPP CORTLAND, OHIO [EMAIL PROTECTED] (mailto:[EMAIL PROTECTED]) _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
