Back to the original question. I thought someone else might have taken a swipe at it.

The masthead on the M17 has provision for not only the forestay and main halyard sheave, but also for a block to hoist the spinnaker. The hole for it is directly above the forestay pin. That masthead is actually a busy place, with two shrouds, two or three halyards and a topping lift block, not to mention lights, windex and on some better equipped boats (not mine), a radio antenna.

I have a picture of mine I can send via email if you send me a note off channel.

I use an asymmetrical spinnaker and in light air, it's a joy. As the wind picks up, it can be downright scary. To hear the "whomp" when that thing suddenly fills and to feel and hear the strain as the boat takes off to hull speed can only be appreciated live and in person.

Howard


On Oct 11, 2006, at 9:05 PM, Gilbert Landin wrote:

I have a spinnaker I have never used, mainly because I too normally solo, its kinda of scary to get it all wrapped up if I mess up, butt as I have heard it said here before "its not how you live, its how you live!." So bury
that rail and wrap that spinnaker
Gilbert



-----Original Message-----
From: [EMAIL PROTECTED] [mailto:montgomery_boats- [EMAIL PROTECTED]
On Behalf Of Timtone
Sent: Tuesday, October 10, 2006 8:45 AM
To: For and about Montgomery Sailboats
Subject: M_Boats: Spinnaker Stuff

I have modified an old spinnaker a buddy gave me some time ago. It was a little big for the 17. I flew it the last three days and love it. Man, it
can keep a guy busy when you are solo.
I have been using temporary lines for all the controls. What I have been wondering is what folks have done to modify the masthead for a spin halyard
sheave? I am going to have to come up with something.
Tim D
Okanogan Lake BC
M17 369 Puff.


_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats


_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats



_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to