I am sure a simple matter of contacting pretty well any sailmaker. They can usually come up with stock rig dimensions and design a sail. Symmetrical or asym will be up to you and you sailing preferences and sailing ground. Personally, I would shop for a older used unit and try one first. If it suits you and you want more, rig the boat properly for it and order up a big ticket unit....size and style based on previous experience with the cheap one. I found four internet based outfits that sell used stuff. I love to get old sails, recut them and play around. Over the years, folks have just given me old sails.
Have fun.
Cheers, Tim D.
===========
From: "Sailfan1" <[EMAIL PROTECTED]>
To: "For and about Montgomery Sailboats" <[email protected]>
Sent: Friday, October 13, 2006 2:31 PM
Subject: Re: M_Boats: Re: Spinnaker Stuff


I'm curious about kites for the 15's. I see allot of discussion but I haven't seen any comments about the lack of a back-stay and if a runner is needed. I'm not sure if the dropped aft shrouds are sufficient, or if only up to a predetermined wind force.

I wouldn't mind flying one myself too but I have just always assumed there wasn't enough mast support. Even flown from the fractional height of the head-stay I have tended to think the forward pressure from one of these would be too great.

Ashley T.
M15 - h# 478
Morgan Hill, CA



----- Original Message ----
From: John Butler <[EMAIL PROTECTED]>
To: [email protected]
Sent: Friday, October 13, 2006 9:44:57 AM
Subject: M_Boats: Re: Spinnaker Stuff


I had an asymmetrical spinnaker on my first M15 "Joy" and it did
indeed pull like a Kenworth in a decent breeze, hull speed plus, and
what a rooster tail wake!

John

_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats



_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to