To All,
I am in the process of upgrading/restoring hull #201 (1982). I would like to
gain access to the transom so that I can replace the current motor mount and
add a ladder to the opposite side. I am considering cutting an access panel in
the rear of the boat (cockpit side of course, I'm not a total idiot!), and seal
it with a teak louvered vent cover. The teak cover would be simply for looks
and allow me to reach both sides of the inside mounting brackets for the motor
mount and ladder. The hole would be approx. 6"x9" Does anyone think that this
cut would compromise the integrity of the transom or other parts of the boat?
It appears that Norm, hull #172 has made a similar mod. I'm guessing this was
for the same reason.
I am also considering other upgrades such as electrical, so I'd like to know
how others have wired their boats and stored the battery. If anyone has any
suggestions for additional mods that they consider a "must have", vs "nice to
do", I'd appreciate some thoughts. I realize a season or two of sailing the
boat would help shed some light on these types of mods, but since I have all
winter to wait before sailing season, I thought I'd take advantage of everyone
elses experiences.
Any thoughts would be appreciated.
Skip
Still working on a name
Hull #201
________________________________________________________________________
Check out the new AOL. Most comprehensive set of free safety and security
tools, free access to millions of high-quality videos from across the web, free
AOL Mail and more.
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
