Donglai,
   
  I was having the same problem last year with my M17... Jerry's first 
recommendation was to whip up some epoxy and spread that around the pin on both 
sides  (goop up one side, hammer it over to the other side to goop it up also 
and then line it up flush) and let it dry for a day or two. I believe this 
"thickens" the pin and keeps it where it belongs.
   
  If that doesn't work (and it worked for me so far) then you probably need to 
replace the pin. He said that you have to knock the new one in while knocking 
the old one out... I am sure there is a trick to that as the centerboard may 
want to fall somewhere in there. I guess if i were to do that i would hammer 
hard and fast to make sure the hole stayed lined up throughout... perhaps there 
is another trick to this...
   
  But i would try the epoxy fix first... it worked for me (so far)!
   
  Jeff
  M17 #336

Donglai Gong <[EMAIL PROTECTED]> wrote:
  Hello all,

I took my M15 "Shaolin" out for first sail of the season in the Sandy
Hook bay area (by NJ). We had a great time on the water and did some
beach hopping. I encountered two major issues.

1) My Honda 2hp is burning oil and start to smoke badly when I ramp up
the RPM. We had to shut it off to let it cool before turning it back
on again. It worked fine afterwards in speed just above idle, we
cruised at 2 knots or so with the motor all afternoon. Any ideas on
what could be causing the oil burn? Oil also leaks out of the exhaust
pipe if I ramp up the engine.

2) My centerboard pin almost fell out. After I towed the boat out of
the water, I saw that the centerboard pin is stuck out way on one
side. I could push it mostly back in with just hand force. I don't
want is to sail along and have my centerboard fall out on me next time
we go out.

I'd appreciate any idea or suggestions on these two problems. Thanks!

Donglai

"Shaolin" M15 #612

_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to