Thanks, Doug. That was very cool. Here's the original link for others: http://www.capizzano.com/Semana_de_Mar_del_Plata_2008/index.htm
kb --- [EMAIL PROTECTED] wrote: > Send montgomery_boats mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, > visit > > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > or, via email, send a message with subject or body > 'help' to > [EMAIL PROTECTED] > > You can reach the person managing the list at > [EMAIL PROTECTED] > > When replying, please edit your Subject line so it > is more specific > than "Re: Contents of montgomery_boats digest..." > > > Today's Topics: > > 1. Re: Wet Lockers question - Looking for Connie > Bennick > (Conbert H Benneck) > 2. Cockpit table? (Bobbie Mayer) > 3. Re: Good Dinghy for an M15 or M17 (Conbert H > Benneck) > 4. Re: Navigation GPS ([EMAIL PROTECTED]) > 5. Re: Navigation GPS ([EMAIL PROTECTED]) > 6. Havasu Poker Run/Scavenger Hunt Pictures > ([EMAIL PROTECTED]) > 7. Fwd: [openboat] speechless (Doug Kelch) > 8. Re: Good Dinghy for an M15 or M17 (Gerald > Wolczanski) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 3 Mar 2008 14:34:18 -0800 (PST) > From: Conbert H Benneck <[EMAIL PROTECTED]> > Subject: Re: M_Boats: Wet Lockers question - Looking > for Connie > Bennick > To: For and about Montgomery Sailboats > <[email protected]> > Message-ID: > <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=us-ascii > > Sorry I don't have any photos of my cutting the > shallow locker out (STBD side) to gain access to the > space below on my M15. > > After doing the cutting, around the flat lip, I > epoxied supports to the underside of the cutout area > in the hull so that I could drop in the shallow > locker. That way I had the best of both worlds: > the shallow locker area for small stuff, but when I > lifted it out, I could stow large items (Bimini, > extra cockpit cushions; my emergency paddle; etc. ( > my PORT sail locker went to the bottom of the hull. > > I also put a closed cell adhesive foam tape on the > inside of the sail locker lids to make them > waterproof. > > I had latches on the sail lockers so that they could > be locked with a pad lock when away from the boat > (ABUS will sell you three small all brass locks all > keyed the same. One key opens all three locks). > > I fitted them so that the latches stayed firmly in > place while sailing, but could be pulled off the > hasp for access to the sail locker. > > This way I had sealed sail locker lids, that were > lockable. > > Worked great. > > Connie > ex M15 #400 LEPPO > > ----- Original Message ---- > From: "[EMAIL PROTECTED]" > <[EMAIL PROTECTED]> > To: [email protected] > Sent: Monday, March 3, 2008 3:10:16 PM > Subject: M_Boats: Wet Lockers question - Looking for > Connie Bennick > > > > > I'm > looking > for > pictures > of > the > whole > process > of > cutting > out > a > locker > for > the > purpose > of > expanded > storage. > If > anyone > has > pictures > of > a > completed > project > to > include > a > good > way > to > stop > water > intrusion > below > deck, > I'd > like > to > see > them. > I > understand > cutting > the > locker > off. > I'm > looking > for > the > rest > of > the > story... > > [EMAIL PROTECTED] > > Kendall > M-15 > #164 > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > > > > > > ------------------------------ > > Message: 2 > Date: Mon, 3 Mar 2008 18:36:02 -0800 > From: Bobbie Mayer <[EMAIL PROTECTED]> > Subject: M_Boats: Cockpit table? > To: [email protected] > Message-ID: <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="us-ascii" ; > format="flowed" > > I'm looking for a swing-away type cockpit table or > something similar, > not very expensive, not really for my M15 but I > figured someone here > might have an idea where to get or how to build one. > > Bobbie > > > > ------------------------------ > > Message: 3 > Date: Tue, 4 Mar 2008 14:05:40 -0800 (PST) > From: Conbert H Benneck <[EMAIL PROTECTED]> > Subject: Re: M_Boats: Good Dinghy for an M15 or M17 > To: For and about Montgomery Sailboats > <[email protected]> > Message-ID: > <[EMAIL PROTECTED]> > Content-Type: text/plain; charset=us-ascii > > Hi M-ers, > > In case any of you might need a good dinghy for your > M15 === message truncated === ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
