Thanks to all of you who offered an opinion. We went yesterday on the  
lake again with the M-17, and the rigging and de-rigging went much  
better this time. I guess it'll get better with experience.

A few more questions:

-- I am now refinishing the outside wood, which was covered in some  
kind of varnish which was peeling badly. What do people prefer, leave  
the teak oiled and not varnish it, or put a coat of Cetol on it?
-- there are some spots on the deck where some small dark spots are  
starting to appear. I guess it is probably some light mold. Any  
suggestions for products to remove it, and then is there something I  
could put on to stunt its growth?
-- how do you remove old decals (old registration numbers/registration  
stickers)?
-- I have found at Home Depot a product called liquid fiberglass,  
which you pour on wood and they say it creates a coating like 60  
layers of varnish. Has anyone used anything like this? I wanted to use  
it on the spots on the rudder where the existing varnish is peeling,  
as a temporary fix. In the future I was planning on stripping the  
entire rudder and recoating it in this stuff.
-- are the hatch boards teak or regular wood? How do you strip them?
-- and my old question: how urgent is it to rebed all the deck  
hardware? What compund do people use to seal the screws? How long a  
job is it? Any hints on how to do the job? My deck is in very good  
shape, with no soft spots, but I'd like to keep it that way. I had  
hoped to do this job in the fall, nowadays when I have free time I'd  
rather go sailing...
-- is there any special maintenance that needs to be done to the two  
centerboard bolts? The gelcoat around them shows slight signs of rust  
on an area maybe 1/4" around the bolt. Also, the gelcoat around the  
rear bolt shows some small cracks, and has started to slightly bubble  
off. I could post some photos later. What needs to be done about this?  
The cb itself is moving very easily up and down.

Thanks,

Andrei.

_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to