Ron,
I think someone in the group might have tried a standard remote outboard
tank with the end fitting downstream from the bulb removed.  If the bulb
pumps fast enough, it might be adequate. Never tried it myself.
Tom Jenkins
M17 Scintilla

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of judy
casino
Sent: Thursday, August 07, 2008 7:13 PM
To: For and about Montgomery Sailboats
Subject: Re: M_Boats: 5 HP Honda on M-15

  I don't like hanging over the transom either. I'm going to check on the
Moeller Flo-n-Go fuel pump (it appears to be a small, manual gas pump that
fits into your jerry can and is attached to a 4 foot gas station like hose
and fill handle. I have not yet thoroughly researched the item, so I don't
know how small a jerry can you can use, but the prospect of simply inserting
a lightweight fill handle into my Honda 2 hp rather than holding the jerry
can out and over the engine sounds intriguing. The new type of jerry can
fill nozzle is difficult to use and can easily create spillage.
  If anyone has knowledge of or experience with this type of device, I'd
sure appreciate hearing about it.
  Ron, M15 "Spirit"


--- On Thu, 8/7/08, Lou <[EMAIL PROTECTED]> wrote:

> From: Lou <[EMAIL PROTECTED]>
> Subject: M_Boats: 5 HP Honda on M-15
> To: [email protected]
> Date: Thursday, August 7, 2008, 4:24 PM
> Thanks for the feedback on the 5 HP Honda... The reason I
> was considering it was that it has reverse and an external
> fuel tank.  I do not like having to hang over the boat to
> refuel in the middle of a chop also reverse wpuld be a nice
> thing to have again...  Thanks again to all...  Lou  ( M-15
> Still The One)
> _______________________________________________
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats


      

_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats



_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to