Jon- I happen to have an old m-10 mast standing in the corner. Where do you live? Shipping is the problem.
jerry ----- Original Message ----- From: "Jon Freeman" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, October 15, 2008 5:46 PM Subject: M_Boats: M-10 Sailing Rig Help Request > Hi folks - > > > > I just picked up a M-10 that is nearly complete. The hull has been abused, > but is very recoverable. The sail is a little dirty, but in good shape. I > have the rudder, gaff, boom and dagger board. However, NO mast! I can > probably design one, but would really like to make this as close to > original > as possible. > > > > Anybody happen to have the same gaff-rigged M-10 (to share > pictures/dimensions), OR a design sketch? I pinged Jerry M., but no > response > yet. Thought I'd try the group. > > > > Here's a little more data: > > > > Hull number appears to be #271. > > > > Sail dimensions are (I hope close is good enough for now): > > > > Foot - 103" (about 6" curve downward from horizontal) > > Leech - 179" > > Luff - 59" > > Head 105" > > > > The hull has molded-in side seats, but no bow or stern seats. There are > oarlocks. > > > > All in all, this should turn out to be a beautiful little dinghy with a > little patchwork and paint/varnish. > > > > Any info you all might provide would be much appreciated! > > > > Thanks, > > > > Jon Freeman > > > > > > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > > > -- > No virus found in this incoming message. > Checked by AVG. > Version: 7.5.524 / Virus Database: 270.8.0/1726 - Release Date: 10/15/2008 > 7:29 AM > > _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
