Thank you both for all your advice and knowledge!

Lydia Irons

On Thursday, July 10, 2025 at 12:48:14 AM UTC-7 Paolo Piras wrote:

> Hi Andrea and Lydia
> just a word about "In the first case, however, CS is just rounding
> error (1.00001, 0.9999
> and the like)". It's a while I don't use MorphoJ but I think that
> after GPA rotation with scaling at unit CS (thus "1" precisely) it
> projects data orthogonally [I dont think it does it stereo
> graphically] from the (hemi-) sphere [I suspect it does not scale at
> 1/cos(rho), i.e. Kendall's sphere sensu stricto] onto the tangent
> plane to the consensus; CS of shapes lying on the (hemi-) sphere is
> always actually 1, i.e. the sphere's radius by definition, but CS of
> projected data is the vector length from the (hemi-) sphere center and
> the point on the tangent plane; thus it is impossible to have CS
> values smaller than 1: all the values should exceed 1 by a small
> quantity but they should never be smaller nor exactly 1. Only the
> consensus will have 1 as it lies concomitantly on the sphere and on
> the tangent plane by definition.
> Not sure, however, about fine details in MorphoJ procedure.
>
> All the best
> Paolo
>
>
>
> Il giorno gio 10 lug 2025 alle ore 09:33 andrea cardini
> <[email protected]> ha scritto:
> >
> > Dear Lydia,
> > I read quickly but the steps you wrote seem correct to me. Most of them
> > are also summarized in the guidelines I wrote a while ago:
> > https://europeanjournaloftaxonomy.eu/index.php/ejt/issue/view/1425
> > In the papers, you'll find some caveats about the statistical analyses
> > and visualization of superimposed data and the references to the papers
> > covering those issues.
> >
> > I've not used CoordGen8 for ages and can't remember what it does 
> precisely.
> > However, before importing the data in MorphoJ, I suggest you to rescale
> > the objects to their original centroid size (CS). Otherwise, that
> > information is lost in MorphoJ unless you import CS as a covariate. Be
> > careful, because MorphoJ (after redoing the superimposition) will show
> > you a CS variable regardless of whether you imported shape or form data.
> > In the first case, however, CS is just rounding error (1.00001, 0.9999
> > and the like). If you import form (i.e., rescaled superimposed data),
> > that's not an issue and you have the correct CS. Most of the time, you
> > want to analyze both shape, size and maybe allometry.
> > Rescaling is trivial: in xls, multiply each shape coordinates for the
> > corresponding CS. Alternatively, if you use TPSRelw, there should be an
> > option for rescaling. It used to be called "restore size" (more or less)
> > but possibly now it's Boas coordinates. Jim will correct me. I am not
> > sure and cannot check now, as I have a beta version installed which is a
> > bit different.
> >
> > Good luck with the analysis!
> > Cheers
> >
> > Andrea PS I think there's a later version of MorphoJ now.
> >
> >
> > On 09/07/2025 20:12, 'Lydia Irons' via Morphmet wrote:
> > > Hi,
> > >
> > > I’d like some input on whether I’m using various geometric morphometric
> > > programs correctly or not. I’m a research technician working on a 
> geometric
> > > morphometric project on seed beetles, and I’ve mainly taught myself 
> how to
> > > use all these programs by reading various handbooks and such. Since 
> there
> > > are a lot of steps, I want to make sure I’m not missing anything or 
> doing
> > > something incorrectly. Here’s how I’ve been doing it, starting from 
> placing
> > > landmarks all the way to running statistical analyses:
> > >
> > > 1. I use tpsUtil32 to create a tps file of all the photos I want to
> > > landmark using the “Build tps file from images” operation. I hit 
> “Input”
> > > and choose an image file from the folder where all my images are, then 
> I
> > > hit “Output” and create a name for the tps file. I then select “Setup” 
> and
> > > include all the images I need, then hit “ok”
> > > 2. Then I upload this file to tpsDig264 and place the landmarks first, 
> then
> > > the semilandmarks, for each specimen. I use the “Digitize landmarks” 
> tool
> > > for landmarks, and the “Draw background curves” tool for 
> semilandmarks. I
> > > make sure every specimen has the same number of landmarks and
> > > semilandmarks, using the “Resample curve” option to keep the number of
> > > semilandmarks consistent for each curve
> > > 3. Once I’m done landmarking, I open the tps file using Notepad and 
> change
> > > the number after “ID=” to the unique specimen IDs I’ve given to each
> > > specimen
> > > 4. Then I use CoordGen8 and upload the tps file using the “load tps,
> > > convert curves, create SLM proto” option. I save the protocol file, 
> then do
> > > a “SemiLandMark Alignment” and upload the protocol file to align all 
> the
> > > landmarks and semilandmarks. Then I hit “save all”
> > > 5. The resulting file then has to be formatted for MorphoJ, which 
> involves
> > > adding the specimen IDs to the beginning of each block of coordinates 
> that
> > > corresponds to that specimen, deleting the centroid size at the end of 
> each
> > > block of coordinates, making sure a paragraph mark separates each
> > > specimen’s block of coordinates, and adding a comma followed by a space
> > > between every number
> > > 6. Once the formatting is done, I upload this file to MorphoJ 1.07a by
> > > selecting “create new dataset” and selecting the data as 2 dimensions,
> > > selecting “yes” for object symmetry if applicable, and choosing the 
> file
> > > type as “text.” Then I click “new procrustes fit” and line up the 
> landmarks
> > > if there is object symmetry. I look for any outliers, generate a 
> covariance
> > > matrix, extract classifiers from my specimen ID, and run whatever 
> analyses
> > > I need to (PCA, CVA, ANOVA, etc.)
> > >
> > > Are there any steps I’m missing or things I’m doing incorrectly?
> > >
> > > Thank you in advance,
> > > Lydia Irons
> > >
> >
> > --
> > Andrea Cardini
> > E-mail address: [email protected], [email protected]
> > WEBPAGE: https://sites.google.com/view/alcardini2/
> >
> > --
> > You received this message because you are subscribed to the Google 
> Groups "Morphmet" group.
> > To unsubscribe from this group and stop receiving emails from it, send 
> an email to [email protected].
> > To view this discussion visit 
> https://groups.google.com/d/msgid/morphmet2/cb16dbac-a966-435a-a1c9-6f1ed43f8267%40gmail.com
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Morphmet" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion visit 
https://groups.google.com/d/msgid/morphmet2/03a01ae2-edb1-4adf-a678-9f76f0682781n%40googlegroups.com.

Reply via email to