----- Forwarded message from [email protected] ----- Date: Tue, 09 Oct 2012 15:47:35 -0700 From: [email protected] Reply-To: [email protected] Subject: RE: still having problems To: [email protected]
----- Forwarded message from [email protected] ----- Date: Tue, 9 Oct 2012 04:25:12 -0400 From: [email protected] Reply-To: [email protected] Subject: RE: still having problems To: [email protected] Dear Don I did not make any changes to the file, but you have to make sure you use the right settings. Do the following. Obviously, start by opening MorphoJ. File --> Create new project at "Dimensionality of the data" click '3 dimensions' at "File type" click 'Morphologika' Then, select your file and click 'Create dataset' The screen should now read: "Reading from Morphologika file 'Test.txt'.Finished reading the file." Go to the tab "Project tree" and click on your project (should be the bottom line in the tree) Preliminaries --> New Procrustes fit Choose your preferred method and click 'Perform Procrustes fit' Your Procrustes fit should appear on screen in the "Graphhics" tab. The MorphoJ manual should be able to help you out with any further things you might like to do, such as PCA. Good luck! Best wishes, Anneke ________________________________________ From: [email protected] [[email protected]] Sent: 08 October 2012 19:19 To: [email protected] Subject: RE: still having problems ----- Forwarded message from [email protected] ----- Date: Sun, 07 Oct 2012 16:11:31 -0700 From: [email protected] Reply-To: [email protected] Subject: RE: still having problems To: [email protected] ----- Forwarded message from "Lewis, Dr. Donald" ----- Date: Sun, 7 Oct 2012 14:15:26 -0400 From: "Lewis, Dr. Donald" Reply-To: "Lewis, Dr. Donald" Subject: RE: still having problems To: [email protected] Anneke, What changes to this do I need to make to make this file load into MorphoJ. I received an error message saying that [landmarks] had fwewer than two datasets, but it doesn't. How do I tweak this? Any ideas will be appreciated. Thanks, Don -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Saturday, October 06, 2012 5:53 PM To: [email protected] Subject: RE: still having problems ----- Forwarded message from [email protected] ----- Date: Fri, 05 Oct 2012 12:24:53 -0700 From: [email protected] Reply-To: [email protected] Subject: RE: still having problems To: [email protected] ----- Forwarded message from [email protected] ----- Date: Fri, 5 Oct 2012 04:47:09 -0400 From: [email protected] Reply-To: [email protected] Subject: RE: still having problems To: [email protected] Dear Don Lewis I have no problem loading the file in Morphologika on my machine, but I cannot to a procrustes analysis either. So, it seems there might be a problem with the file somewhere, but to be honest, I do not see it (at least not at first sight)... I have no problem loading your file in MorphoJ though, so you might consider using this program instead, which is possibly a quicker solution. Best wishes, Anneke van Heteren ________________________________________ From: [email protected] [[email protected]] Sent: 04 October 2012 15:45 To: [email protected] Subject: still having problems ----- Forwarded message from [email protected] ----- Date: Wed, 03 Oct 2012 14:28:56 -0700 From: [email protected] Reply-To: [email protected] Subject: still having problems To: [email protected] ----- Forwarded message from "Lewis, Dr. Donald" ----- Date: Wed, 3 Oct 2012 16:14:14 -0400 From: "Lewis, Dr. Donald" Reply-To: "Lewis, Dr. Donald" Subject: still having problems To: [email protected] Friends, Would someone please check to see whether this file loads and runs on Morphlogika? I cannot get it to load on any computer to which I have access, no matter what generation of MS Windows OS is running. Have I made an error somewhere? Thanks, Don Lewis Please consider the environment before printing this email. Confidentiality Notice This electronic mail transmission and any accompanying documents contain information belonging to the sender, which may be confidential and legally privileged. This information is intended only for the use of the individual or entity to whom this electronic mail transmission was sent as indicated above. If you are not the intended recipient, any disclosure, copying, distribution, or action taken in reliance on the contents of the information contained in this transmission is strictly prohibited. If you are not the addressee identified above, you have received this transmission in error, and we ask that you please call us collect at 815.288.5531 to report the receipt, and that you immediately delete the transmission. Thank you. ----- End forwarded message ----- ----- End forwarded message ----- Consider the environment. Please don't print this e-mail unless you really need to. This email and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose or otherwise act upon any part of this email or its attachments. Internet communications are not guaranteed to be secure or virus-free. University of Roehampton does not accept responsibility for any loss arising from unauthorised access to, or interference with, any Internet communications by any third party, or from the transmission of any viruses. Any opinion or other information in this e-mail or its attachments that does not relate to the business of University of Roehampton is personal to the sender and is not given or endorsed by University of Roehampton. University of Roehampton is the trading name of Roehampton University, a company limited by guarantee incorporated in England under number 5161359. Registered Office: Grove House, Roehampton Lane, London SW15 5PJ. An exempt charity. ----- End forwarded message ----- ----- End forwarded message -----
