Send Motion-user mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Re: RTSP cant be opened in motion. Why? (Mariusz Ciszewski)
2. Re: Pi & Logitech C920 (Dave Howorth)
----------------------------------------------------------------------
Message: 1
Date: Wed, 23 Sep 2015 21:31:39 +0200
From: Mariusz Ciszewski <[email protected]>
Subject: Re: [Motion-user] RTSP cant be opened in motion. Why?
To: Motion discussion list <[email protected]>
Message-ID:
<CAOpAQyLscTZ9-BC78nV4LydM97AqjSUV9Tw=f0f-ckxsxbv...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
And aswe can see it works with VLC:
http://prntscr.com/8jp3tv
http://prntscr.com/8jp4co
2015-09-23 20:56 GMT+02:00 Mariusz Ciszewski <[email protected]>:
> > Nobody knows why.
> > Unless you show any detailed logs
>
> root@raspberrypi:~# motion
> [0] [NTC] [ALL] conf_load: Processing thread 0 - config file
> /etc/motion/motion.conf
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option "rtsp_uses_tcp"
> [0] [NTC] [ALL] config_thread: Processing config file /etc/motion/test.conf
> [0] [NTC] [ALL] motion_startup: Motion 3.2.12+git20140228 Started
> [0] [NTC] [ALL] motion_startup: Logging to syslog
> [0] [NTC] [ALL] motion_startup: Using log type (ALL) log level (NTC)
> [0] [NTC] [ENC] ffmpeg_init: ffmpeg LIBAVCODEC_BUILD 3670016
> LIBAVFORMAT_BUILD 3670272
> [0] [NTC] [ALL] main: Motion running in setup mode.
> [0] [NTC] [ALL] main: Thread 1 is from /etc/motion/test.conf
> [0] [NTC] [ALL] main: Thread 1 is device: rtsp://192.168.1.4:554/live.sdp
> input -1
> [0] [NTC] [ALL] main: Stream port 8004
> [0] [NTC] [ALL] main: Waiting for threads to finish, pid: 15583
> [0] [NTC] [STR] httpd_run: motion-httpd testing : IPV4 addr: 0.0.0.0 port:
> 8000
> [0] [NTC] [STR] httpd_run: motion-httpd Bound : IPV4 addr: 0.0.0.0 port:
> 8000
> [1] [NTC] [ALL] motion_init: Thread 1 started , motion detection Enabled
> [0] [NTC] [STR] httpd_run: motion-httpd/3.2.12+git20140228 running,
> accepting connections
> [0] [NTC] [STR] httpd_run: motion-httpd: waiting for data on 0.0.0.0 port
> TCP 8000
> [1] [ALR] [NET] netcam_start: Network Camera thread starting... for url
> (rtsp://192.168.1.4:554/live.sdp)
> [1] [CRT] [NET] netcam_start: Invalid netcam_url (rtsp://
> 192.168.1.4:554/live.sdp)
> [1] [WRN] [ALL] motion_init: Could not fetch initial image from camera
> Motion continues using width and height from config file(s)
> [1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer to 1 items
> [1] [NTC] [STR] http_bindsock: motion-stream testing : IPV4 addr: 0.0.0.0
> port: 8004
> [1] [NTC] [STR] http_bindsock: motion-stream Bound : IPV4 addr: 0.0.0.0
> port: 8004
> [1] [NTC] [ALL] motion_init: Started motion-stream server in port 8004
> auth Disabled
> [1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer to 2 items
> [1] [WRN] [ALL] motion_loop: Retrying until successful connection with
> camera
> [1] [ALR] [NET] netcam_start: Network Camera thread starting... for url
> (rtsp://192.168.1.4:554/live.sdp)
> [1] [CRT] [NET] netcam_start: Invalid netcam_url (rtsp://
> 192.168.1.4:554/live.sdp)
> [1] [WRN] [ALL] motion_loop: Retrying until successful connection with
> camera
> [1] [ALR] [NET] netcam_start: Network Camera thread starting... for url
> (rtsp://192.168.1.4:554/live.sdp)
> [1] [CRT] [NET] netcam_start: Invalid netcam_url (rtsp://
> 192.168.1.4:554/live.sdp)
> [1] [WRN] [ALL] motion_loop: Retrying until successful connection with
> camera
> [1] [ALR] [NET] netcam_start: Network Camera thread starting... for url
> (rtsp://192.168.1.4:554/live.sdp)
> [1] [CRT] [NET] netcam_start: Invalid netcam_url (rtsp://
> 192.168.1.4:554/live.sdp)
> [1] [NTC] [ALL] motion_loop: Video signal lost - Adding grey image
> [1] [WRN] [ALL] motion_loop: Retrying until successful connection with
> camera
> [1] [ALR] [NET] netcam_start: Network Camera thread starting... for url
> (rtsp://192.168.1.4:554/live.sdp)
> [1] [CRT] [NET] netcam_start: Invalid netcam_url (rtsp://
> 192.168.1.4:554/live.sdp)
> [1] [WRN] [ALL] motion_loop: Retrying until successful connection with
> camera
> [1] [ALR] [NET] netcam_start: Network Camera thread starting... for url
> (rtsp://192.168.1.4:554/live.sdp)
> [1] [CRT] [NET] netcam_start: Invalid netcam_url (rtsp://
> 192.168.1.4:554/live.sdp)
> [1] [WRN] [ALL] motion_loop: Retrying until successful connection with
> camera
> [1] [ALR] [NET] netcam_start: Network Camera thread starting... for url
> (rtsp://192.168.1.4:554/live.sdp)
> [1] [CRT] [NET] netcam_start: Invalid netcam_url (rtsp://
> 192.168.1.4:554/live.sdp)
> ^C[1] [NTC] [ALL] motion_loop: End of event 1
> [1] [NTC] [ALL] motion_loop: Thread exiting
> [1] [NTC] [STR] stream_stop: Closing motion-stream listen socket & active
> motion-stream sockets
> [1] [NTC] [STR] stream_stop: Closed motion-stream listen socket & active
> motion-stream sockets
> [0] [NTC] [ALL] main: Threads finished
> [0] [NTC] [STR] httpd_run: motion-httpd - Finishing
> [0] [NTC] [STR] httpd_run: motion-httpd Closing
> [0] [NTC] [STR] motion_web_control: motion-httpd thread exit
> [0] [NTC] [ALL] main: Motion terminating
> root@raspberrypi:~#
>
> Please help.
>
> 2015-09-23 11:49 GMT+02:00 tosiara <[email protected]>:
>
>> Nobody knows why.
>> Unless you show any detailed logs
>>
>> On Wed, Sep 23, 2015 at 12:42 PM, Mariusz Ciszewski <
>> [email protected]> wrote:
>>
>>> Hello.
>>>
>>> This streams work for me in VLC:
>>> rtsp://192.168.1.4:554/live.sdp
>>>
>>> But when I try to set it up inside motion:
>>> netcam_url rtsp://192.168.1.4:554/live.sdp
>>>
>>> i can see only "Unable to open Video device" on gray screen.
>>>
>>> User and password is not configured / not needed.
>>>
>>> Why this doesn't work?
>>>
>>> Motion 3.2.12+git20140228
>>>
>>>
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
>>> Get real-time metrics from all of your servers, apps and tools
>>> in one place.
>>> SourceForge users - Click here to start your Free Trial of Datadog now!
>>> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
>>> _______________________________________________
>>> Motion-user mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/motion-user
>>> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
>>>
>>>
>>
>>
>> ------------------------------------------------------------------------------
>> Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
>> Get real-time metrics from all of your servers, apps and tools
>> in one place.
>> SourceForge users - Click here to start your Free Trial of Datadog now!
>> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
>> _______________________________________________
>> Motion-user mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/motion-user
>> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 2
Date: Wed, 23 Sep 2015 20:52:44 +0100
From: Dave Howorth <[email protected]>
Subject: Re: [Motion-user] Pi & Logitech C920
To: Motion discussion list <[email protected]>
Message-ID: <[email protected]>
Content-Type: text/plain; charset="UTF-8"
I tried autoreconf -f and it built without error. I edited the init
script to use /etc/local/bin/motion for DAEMON and changed motion.conf
to be 1280x720 and restarted the service.
Sadly, it detected motion and exited but did not create any image or
video files:
Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] motion_startup:
Using default log level (NTC) (6)
Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] motion_startup:
Motion Unofficial-Git-UNKNOWN Started
Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] motion_startup:
Logging to syslog
Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] motion_startup:
Using default log type (ALL)
Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] motion_startup:
Using log type (ALL) log level (NTC)
Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] main: Thread 1 is
device: /dev/video0 input -1
Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] main: Stream port 0
Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] main: Waiting for
threads to finish, pid: 7205
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [ALL] motion_init: Thread
1 started , motion detection Enabled
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] vid_v4lx_start:
Using videodevice /dev/video0 and input -1
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_get_capability:
#012------------------------#012cap.driver: "uvcvideo"#012cap.card: "HD
Pro Webcam C920"#012cap.bus_info:
"usb-bcm2708_usb-1.2"#012cap.capabilities=0x04000001#012------------------------
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_get_capability:
- VIDEO_CAPTURE
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_get_capability:
- STREAMING
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_select_input:
name = "Camera 1", type 0x00000002, status 00000000
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_select_input: -
CAMERA
Sep 23 20:36:02 raspberrypi motion: [1] [WRN] [VID] v4l2_select_input:
Device doesn't support VIDIOC_G_STD
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format:
Config palette index 17 (YU12) doesn't work.
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format:
Supported palettes:
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format:
(0) YUYV (YUV 4:2:2 (YUYV))
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format:
0 - YUV 4:2:2 (YUYV) (compressed : 0) (0x56595559)
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format:
(1) H264 (H.264)
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format:
1 - H.264 (compressed : 1) (0x34363248)
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format:
(2) MJPG (MJPEG)
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format:
2 - MJPEG (compressed : 1) (0x47504a4d)
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format
Selected palette YUYV
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
v4l2_do_set_pix_format: Testing palette YUYV (352x288)
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
v4l2_do_set_pix_format: Using palette YUYV (352x288) bytesperlines 704
sizeimage 202752 colorspace 00000008
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
found control 0x00980900, "Brightness", range 0,255
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
#011"Brightness", default -8193, current 128
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
found control 0x00980901, "Contrast", range 0,255
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
#011"Contrast", default 57343, current 128
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
found control 0x00980902, "Saturation", range 0,255
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
#011"Saturation", default 57343, current 128
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
found control 0x00980918, "Power Line Frequency", range 0,2
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
#011"Power Line Frequency", default 2, current 2
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
found control 0x00980913, "Gain", range 0,255
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
#011"Gain", default 57343, current 0
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] vid_v4lx_start:
Using V4L2
Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [ALL] image_ring_resize:
Resizing pre_capture buffer to 1 items
Sep 23 20:37:29 raspberrypi motion: [1] [NTC] [EVT] event_new_video FPS
14
Sep 23 20:37:29 raspberrypi motion: [1] [NTC] [ALL] motion_detected:
Motion detected - starting event 1
Sep 23 20:37:29 raspberrypi motion: [1] [NTC] [ALL] motion_loop: Thread
exiting
Sep 23 20:37:29 raspberrypi motion: [1] [NTC] [VID] vid_close: Closing
video device /dev/video0
Sep 23 20:37:29 raspberrypi motion: [0] [NTC] [ALL] main: Threads
finished
Sep 23 20:37:30 raspberrypi motion: [0] [NTC] [ALL] main: Motion
terminating
Also $ lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 7.0 (wheezy)
Release: 7.0
Codename: wheezy
Cheers, Dave
On Tue, 2015-09-22 at 20:12 -0600, Mr Dave wrote:
> I have just checked this on my PI and it appears to function correctly.
>
> Can you tell us the image that you are using so we can test it?
>
> Also, you may want to check the motion_guide.html and INSTALL files
> distributed with the source code. I have updated them to have current
> building/installing instructions as well as all the new and different
> options. It may be as simple as using the
>
> autoreconf -f
>
> option instead of the sequence that you've indicated.
>
> MrDave
>
> On 9/22/2015 5:54 PM, Mr Dave wrote:
> > Yes, that is definitely broken. Sorry about that. I'm pretty sure
> > that this change is only on the unstable branch which is in testing.
> > Can you switch to the master branch and test it again? The following
> > switches your sources over to master which doesn't have the offending
> > code but does have the changes I think you are looking for.
> >
> > git checkout master
> > autoreconf
> > ./configure
> > make
> > make install
> >
> >
> > MrDave
> >
> >
> > On 9/22/2015 4:14 PM, Dave Howorth wrote:
> >> Thanks for that. I've just downloaded it and am trying to compile it but
> >> I ran into something I don't understand. It's the first time I tried to
> >> compile something on the pi. I ran:
> >>
> >> $ autoheader
> >> $ autoconf configure.ac > configure
> >> $ sudo apt-get install libjpeg-dev
> >>
> >> but when I
> >> $ ./configure
> >> it says
> >>
> >> checking for gcc... gcc
> >> checking whether the C compiler works... yes
> >> checking for C compiler default output file name... a.out
> >> checking for suffix of executables...
> >> checking whether we are cross compiling... no
> >> checking for suffix of object files... o
> >> checking whether we are using the GNU C compiler... yes
> >> checking whether gcc accepts -g... yes
> >> checking for gcc option to accept ISO C89... none needed
> >> checking how to run the C preprocessor... gcc -E
> >> checking for grep that handles long lines and -e... /bin/grep
> >> checking for egrep... /bin/grep -E
> >> checking for ANSI C header files... yes
> >> checking for sys/types.h... yes
> >> checking for sys/stat.h... yes
> >> checking for stdlib.h... yes
> >> checking for string.h... yes
> >> checking for memory.h... yes
> >> checking for strings.h... yes
> >> checking for inttypes.h... yes
> >> checking for stdint.h... yes
> >> checking for unistd.h... yes
> >> checking minix/config.h usability... no
> >> checking minix/config.h presence... no
> >> checking for minix/config.h... no
> >> checking whether it is safe to define __EXTENSIONS__... yes
> >> checking for gcc... (cached) gcc
> >> checking whether we are using the GNU C compiler... (cached) yes
> >> checking whether gcc accepts -g... (cached) yes
> >> checking for gcc option to accept ISO C89... (cached) none needed
> >> checking for Darwin... no
> >> checking for *BSD... no
> >> checking for gcc... (cached) gcc
> >> checking whether we are using the GNU C compiler... (cached) yes
> >> checking whether gcc accepts -g... (cached) yes
> >> checking for gcc option to accept ISO C89... (cached) none needed
> >> checking threads... yes
> >> checking for sdl... no
> >> checking for libjpeg-turbo... skipping
> >> checking for libjpeg-mmx... skipping
> >> checking for jpeg_set_defaults in -ljpeg... yes
> >> ./configure: line 5287: syntax error near unexpected token `FFMPEG,'
> >> ./configure: line 5287: ` PKG_CHECK_MODULES(FFMPEG, libavutil
> >> libavformat libavcodec libswscale, HAVE_FFMPEG=yes)'
> >>
> >> A syntax error makes me think something is broken somewhere but I'm not
> >> sure whether I've caused the problem?
> >>
> >> Cheers, Dave
> >>
> >>
> >> On Fri, 2015-09-18 at 09:15 +0300, ?ydr?nas Urbonas wrote:
> >>> Hey, try compiling latest Mr-Dave fork, it contains a fix for
> >>> C910/C920 cameras
> >>> https://github.com/Mr-Dave/motion/commits/unstable
> >>>
> >>>
> >>> On Thu, Sep 17, 2015 at 9:03 PM, Dave Howorth <[email protected]>
> >>> wrote:
> >>> Hello,
> >>> I'm trying to set up motion with a Logitech HD Pro
> >>> Webcam C920
> >>> connected
> >>> to a Raspberry PI. It sort of works but not properly so I'd
> >>> appreciate
> >>> some pointers.
> >>> The Pi has raspberrypi 3.2.27+ #250 PREEMPT
> >>> motion is Version 3.2.12
> >>> I'm sshed to the pi; there's no display on it. I
> >>> have motion
> >>> set up as a
> >>> service started on boot.
> >>> I have two issues that I'd like to resolve:
> >>> (1) motion happily captures video when
> >>> there is motion and
> >>> records an
> >>> avi file and a bunch of jpegs. But it only does this if I
> >>> leave the
> >>> width and height at their default. If I set 1280 x 720 or 1920
> >>> x
> >>> 1080 resolution, nothing gets captured.
> >>> I have tried running cheese and that is able to show
> >>> high-resolution
> >>> video, so I know its not a hardware problem. There's a lot of
> >>> stuff
> >>> in /var/log/messages but I don't understand it:
> >>> Sep 17 18:56:41 raspberrypi motion: [0] Motion
> >>> thread 1
> >>> restart
> >>> Sep 17 18:56:41 raspberrypi motion: [1] cap.driver: "uvcvideo"
> >>> Sep 17 18:56:41 raspberrypi motion: [1] cap.card: "HD Pro
> >>> Webcam C920"
> >>> Sep 17 18:56:41 raspberrypi motion: [1] cap.bus_info:
> >>> "usb-bcm2708_usb-1.2"
> >>> Sep 17 18:56:41 raspberrypi motion: [1]
> >>> cap.capabilities=0x04000001
> >>> Sep 17 18:56:41 raspberrypi motion: [1] - VIDEO_CAPTURE
> >>> Sep 17 18:56:41 raspberrypi motion: [1] - STREAMING
> >>> Sep 17 18:56:41 raspberrypi motion: [1] Config palette index 8
> >>> (YU12)
> >>> doesn't work.
> >>> Sep 17 18:56:41 raspberrypi motion: [1] Supported palettes:
> >>> Sep 17 18:56:41 raspberrypi motion: [1] 0: YUYV (YUV 4:2:2
> >>> (YUYV))
> >>> Sep 17 18:56:41 raspberrypi motion: [1] 1: H264 (H.264)
> >>> Sep 17 18:56:41 raspberrypi motion: [1] 2: MJPG (MJPEG)
> >>> Sep 17 18:56:41 raspberrypi motion: [1] Selected palette YUYV
> >>> Sep 17 18:56:41 raspberrypi motion: [1] Test palette YUYV
> >>> (1280x720)
> >>> Sep 17 18:56:41 raspberrypi motion: [1] Using palette YUYV
> >>> (1280x720)
> >>> bytesperlines 2560 sizeimage 1843200 colorspace 00000008
> >>> Sep 17 18:56:41 raspberrypi motion: [1] found control
> >>> 0x00980900,
> >>> "Brightness", range 0,255
> >>> Sep 17 18:56:41 raspberrypi motion: [1] #011"Brightness",
> >>> default -8193,
> >>> current 128
> >>> Sep 17 18:56:41 raspberrypi motion: [1] found control
> >>> 0x00980901,
> >>> "Contrast", range 0,255
> >>> Sep 17 18:56:41 raspberrypi motion: [1] #011"Contrast",
> >>> default 57343,
> >>> current 128
> >>> Sep 17 18:56:41 raspberrypi motion: [1] found control
> >>> 0x00980902,
> >>> "Saturation", range 0,255
> >>> Sep 17 18:56:41 raspberrypi motion: [1] #011"Saturation",
> >>> default 57343,
> >>> current 128
> >>> Sep 17 18:56:41 raspberrypi motion: [1] found control
> >>> 0x00980913,
> >>> "Gain", range 0,255
> >>> Sep 17 18:56:41 raspberrypi motion: [1] #011"Gain", default
> >>> 57343,
> >>> current 0
> >>> Sep 17 18:56:41 raspberrypi motion: [1] Resizing pre_capture
> >>> buffer to 1
> >>> items
> >>> Sep 17 18:57:03 raspberrypi motion: [1] Resizing pre_capture
> >>> buffer to 3
> >>> items
> >>> (2) motion exits if I try to access the
> >>> web stream at
> >>> http://pi:8081/.
> >>> I'm not too concerned about this issue because it's not
> >>> something I
> >>> intend to use once it all works.
> >>> Cheers, Dave
> >>> ------------------------------------------------------------------------------
> >>> Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
> >>> Get real-time metrics from all of your servers, apps and tools
> >>> in one place.
> >>> SourceForge users - Click here to start your Free Trial of
> >>> Datadog now!
> >>> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
> >>> _______________________________________________
> >>> Motion-user mailing list
> >>> [email protected]
> >>> https://lists.sourceforge.net/lists/listinfo/motion-user
> >>> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
> >>>
> >>>
> >>
> >>
> >> ------------------------------------------------------------------------------
> >>
> >>
> >> _______________________________________________
> >> Motion-user mailing list
> >> [email protected]
> >> https://lists.sourceforge.net/lists/listinfo/motion-user
> >> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
> >
>
>
> ------------------------------------------------------------------------------
> Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
> Get real-time metrics from all of your servers, apps and tools
> in one place.
> SourceForge users - Click here to start your Free Trial of Datadog now!
> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
------------------------------
------------------------------------------------------------------------------
Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
Get real-time metrics from all of your servers, apps and tools
in one place.
SourceForge users - Click here to start your Free Trial of Datadog now!
http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
------------------------------
_______________________________________________
Motion-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/motion-user
End of Motion-user Digest, Vol 112, Issue 18
********************************************
