Send Motion-user mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Re: Pi & Logitech C920 (Harlan Daneker)
----------------------------------------------------------------------
Message: 1
Date: Sat, 26 Sep 2015 12:08:44 -0400
From: Harlan Daneker <[email protected]>
Subject: Re: [Motion-user] Pi & Logitech C920
To: [email protected], Motion discussion list
<[email protected]>
Message-ID:
<CAC1WkiR=wqmlcli32opu0fq+rtrvhpbbotqxciu7tarouvm...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
It would be good if the repository version of motion was updated.
On Sat, Sep 26, 2015 at 12:01 PM, Dave Howorth <[email protected]> wrote:
> Hello again,
>
> I now understand that the version of motion from your repository is
> completely different. I had thought it was just the released version
> with some bug fixes applied. But now I understand that the released
> version is five years old and there has been considerable development
> since. So please accept my apologies for the misunderstanding.
>
> I've now copied /usr/local/etc/motion/motion-dist.conf
> to /usr/local/etc/motion/motion.conf and then edited it:
>
> $ diff motion/motion-dist.conf motion/motion.conf 3a4
> > # and edited by djh on 2015-09-26
> 68c69,70
> < v4l2_palette 17
> ---
> > #v4l2_palette 17
> > v4l2_palette 15
> 100c102,103
> < width 320
> ---
> > #width 320
> > #width 1280
> 103c106,107
> < height 240
> ---
> > #height 240
> > #height 720
> 233c237
> < pre_capture 0
> ---
> > pre_capture 1
> 236c240
> < post_capture 0
> ---
> > post_capture 1
> 270c274
> < quality 75
> ---
> > quality 85
> 439c443
> < #target_dir /tmp/motion
> ---
> > target_dir /home/motion
> 448c452
> < snapshot_filename %v-%Y%m%d%H%M%S-snapshot
> ---
> > snapshot_filename %v-%Y%m%d-%H%M%S-snapshot
> 457c461
> < picture_filename %v-%Y%m%d%H%M%S-%q
> ---
> > picture_filename %v-%Y%m%d-%H%M%S-%q
> 462c466
> < movie_filename %v-%Y%m%d%H%M%S
> ---
> > movie_filename %v-%Y%m%d-%H%M%S
> 480c484,485
> < stream_port 8081
> ---
> > #stream_port 8081
> > stream_port 0
> 523c528,529
> < webcontrol_port 8080
> ---
> > #webcontrol_port 8080
> > webcontrol_port 0
>
> When I run it with the config file as above, it stores jpg files when
> there is movement, but no avi file.
>
> $ motion
> [0] [NTC] [ALL] conf_load: Processing thread 0 - config
> file /usr/local/etc/motion/motion.conf
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "ffmpeg_output_movies"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "ffmpeg_output_debug_movies"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_timelapse"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "ffmpeg_timelapse_mode"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_bps"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "ffmpeg_variable_bitrate"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "ffmpeg_video_codec"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "ffmpeg_duplicate_frames"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option "movie_filename"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "timelapse_filename"
> [0] [NTC] [ALL] motion_startup: Motion Unofficial-Git-UNKNOWN Started
> [0] [NTC] [ALL] motion_startup: Logging to syslog
> [0] [NTC] [ALL] motion_startup: Using log type (ALL) log level (NTC)
> [0] [NTC] [ALL] main: Thread 1 is from /usr/local/etc/motion/motion.conf
> [0] [NTC] [ALL] main: Thread 1 is device: /dev/video0 input -1
> [0] [NTC] [ALL] main: Stream port 0
> [0] [NTC] [ALL] main: Waiting for threads to finish, pid: 8765
> [1] [NTC] [ALL] motion_init: Thread 1 started , motion detection Enabled
> [1] [NTC] [VID] vid_v4lx_start: Using videodevice /dev/video0 and input
> -1
> [1] [NTC] [VID] v4l2_get_capability:
> ------------------------
> cap.driver: "uvcvideo"
> cap.card: "HD Pro Webcam C920"
> cap.bus_info: "usb-bcm2708_usb-1.2"
> cap.capabilities=0x04000001
> ------------------------
> [1] [NTC] [VID] v4l2_get_capability: - VIDEO_CAPTURE
> [1] [NTC] [VID] v4l2_get_capability: - STREAMING
> [1] [NTC] [VID] v4l2_select_input: name = "Camera 1", type 0x00000002,
> status 00000000
> [1] [NTC] [VID] v4l2_select_input: - CAMERA
> [1] [WRN] [VID] v4l2_select_input: Device doesn't support VIDIOC_G_STD
> [1] [NTC] [VID] v4l2_do_set_pix_format: Testing palette YUYV (352x288)
> [1] [NTC] [VID] v4l2_do_set_pix_format: Using palette YUYV (352x288)
> bytesperlines 704 sizeimage 202752 colorspace 00000008
> [1] [NTC] [VID] v4l2_scan_controls: found control 0x00980900,
> "Brightness", range 0,255
> [1] [NTC] [VID] v4l2_scan_controls: "Brightness", default -8193,
> current 128
> [1] [NTC] [VID] v4l2_scan_controls: found control 0x00980901,
> "Contrast", range 0,255
> [1] [NTC] [VID] v4l2_scan_controls: "Contrast", default 57343, current
> 128
> [1] [NTC] [VID] v4l2_scan_controls: found control 0x00980902,
> "Saturation", range 0,255
> [1] [NTC] [VID] v4l2_scan_controls: "Saturation", default 57343,
> current 128
> [1] [NTC] [VID] v4l2_scan_controls: found control 0x00980918, "Power
> Line Frequency", range 0,2
> [1] [NTC] [VID] v4l2_scan_controls: "Power Line Frequency", default 2,
> current 2
> [1] [NTC] [VID] v4l2_scan_controls: found control 0x00980913, "Gain",
> range 0,255
> [1] [NTC] [VID] v4l2_scan_controls: "Gain", default 57343, current 0
> [1] [NTC] [VID] vid_v4lx_start: Using V4L2
> [1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer to 1
> items
> [1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer to 2
> items
> [1] [NTC] [EVT] event_new_video FPS 2
> [1] [NTC] [ALL] motion_detected: Motion detected - starting event 1
> [1] [NTC] [EVT] event_newfile: File of type 1 saved
> to: /home/motion/01-20150926-164437-00.jpg
> [1] [NTC] [EVT] event_newfile: File of type 1 saved
> to: /home/motion/01-20150926-164437-01.jpg
> [1] [NTC] [EVT] event_newfile: File of type 1 saved
> to: /home/motion/01-20150926-164438-00.jpg
> [1] [NTC] [EVT] event_newfile: File of type 1 saved
> to: /home/motion/01-20150926-164438-01.jpg
> [1] [NTC] [EVT] event_newfile: File of type 1 saved
> to: /home/motion/01-20150926-164439-00.jpg
> [1] [NTC] [EVT] event_newfile: File of type 1 saved
> to: /home/motion/01-20150926-164439-01.jpg
> [1] [NTC] [EVT] event_newfile: File of type 1 saved
> to: /home/motion/01-20150926-164440-00.jpg
> [1] [NTC] [EVT] event_newfile: File of type 1 saved
> to: /home/motion/01-20150926-164440-01.jpg
> [1] [NTC] [EVT] event_newfile: File of type 1 saved
> to: /home/motion/01-20150926-164441-00.jpg
> [1] [NTC] [EVT] event_newfile: File of type 1 saved
> to: /home/motion/01-20150926-164441-01.jpg
> [1] [NTC] [EVT] event_newfile: File of type 1 saved
> to: /home/motion/01-20150926-164442-00.jpg
> [1] [NTC] [ALL] motion_loop: End of event 1
> ^C[1] [NTC] [ALL] motion_loop: End of event 2
> [1] [NTC] [ALL] motion_loop: Thread exiting
> [1] [NTC] [VID] vid_close: Closing video device /dev/video0
> [0] [NTC] [ALL] main: Threads finished
> [0] [NTC] [ALL] main: Motion terminating
>
>
> If I change it so the width is 1280 and the height 720, it doesn't
> capture any files:
>
> $ motion
> [0] [NTC] [ALL] conf_load: Processing thread 0 - config
> file /usr/local/etc/motion/motion.conf
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "ffmpeg_output_movies"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "ffmpeg_output_debug_movies"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_timelapse"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "ffmpeg_timelapse_mode"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_bps"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "ffmpeg_variable_bitrate"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "ffmpeg_video_codec"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "ffmpeg_duplicate_frames"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option "movie_filename"
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "timelapse_filename"
> [0] [NTC] [ALL] motion_startup: Motion Unofficial-Git-UNKNOWN Started
> [0] [NTC] [ALL] motion_startup: Logging to syslog
> [0] [NTC] [ALL] motion_startup: Using log type (ALL) log level (NTC)
> [0] [NTC] [ALL] main: Thread 1 is from /usr/local/etc/motion/motion.conf
> [0] [NTC] [ALL] main: Thread 1 is device: /dev/video0 input -1
> [0] [NTC] [ALL] main: Stream port 0
> [0] [NTC] [ALL] main: Waiting for threads to finish, pid: 8799
> [1] [NTC] [ALL] motion_init: Thread 1 started , motion detection Enabled
> [1] [NTC] [VID] vid_v4lx_start: Using videodevice /dev/video0 and input
> -1
> [1] [NTC] [VID] v4l2_get_capability:
> ------------------------
> cap.driver: "uvcvideo"
> cap.card: "HD Pro Webcam C920"
> cap.bus_info: "usb-bcm2708_usb-1.2"
> cap.capabilities=0x04000001
> ------------------------
> [1] [NTC] [VID] v4l2_get_capability: - VIDEO_CAPTURE
> [1] [NTC] [VID] v4l2_get_capability: - STREAMING
> [1] [NTC] [VID] v4l2_select_input: name = "Camera 1", type 0x00000002,
> status 00000000
> [1] [NTC] [VID] v4l2_select_input: - CAMERA
> [1] [WRN] [VID] v4l2_select_input: Device doesn't support VIDIOC_G_STD
> [1] [NTC] [VID] v4l2_do_set_pix_format: Testing palette YUYV (1280x720)
> [1] [NTC] [VID] v4l2_do_set_pix_format: Using palette YUYV (1280x720)
> bytesperlines 2560 sizeimage 1843200 colorspace 00000008
> [1] [NTC] [VID] v4l2_scan_controls: found control 0x00980900,
> "Brightness", range 0,255
> [1] [NTC] [VID] v4l2_scan_controls: "Brightness", default -8193,
> current 128
> [1] [NTC] [VID] v4l2_scan_controls: found control 0x00980901,
> "Contrast", range 0,255
> [1] [NTC] [VID] v4l2_scan_controls: "Contrast", default 57343, current
> 128
> [1] [NTC] [VID] v4l2_scan_controls: found control 0x00980902,
> "Saturation", range 0,255
> [1] [NTC] [VID] v4l2_scan_controls: "Saturation", default 57343,
> current 128
> [1] [NTC] [VID] v4l2_scan_controls: found control 0x00980918, "Power
> Line Frequency", range 0,2
> [1] [NTC] [VID] v4l2_scan_controls: "Power Line Frequency", default 2,
> current 2
> [1] [NTC] [VID] v4l2_scan_controls: found control 0x00980913, "Gain",
> range 0,255
> [1] [NTC] [VID] v4l2_scan_controls: "Gain", default 57343, current 0
> [1] [NTC] [VID] vid_v4lx_start: Using V4L2
> [1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer to 1
> items
> [1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer to 2
> items
> [0] [ERR] [ALL] main: Thread 1 - Watchdog timeout, trying to do a
> graceful restart
> [1] [NTC] [ALL] motion_loop: Thread exiting
> [1] [NTC] [VID] vid_close: Closing video device /dev/video0
> [0] [NTC] [ALL] main: Motion thread 1 restart
> [1] [NTC] [ALL] motion_init: Thread 1 started , motion detection Enabled
> [1] [NTC] [VID] vid_v4lx_start: Using videodevice /dev/video0 and input
> -1
> [1] [NTC] [VID] v4l2_get_capability:
> ------------------------
> cap.driver: "uvcvideo"
> cap.card: "HD Pro Webcam C920"
> cap.bus_info: "usb-bcm2708_usb-1.2"
> cap.capabilities=0x04000001
> ------------------------
> [1] [NTC] [VID] v4l2_get_capability: - VIDEO_CAPTURE
> [1] [NTC] [VID] v4l2_get_capability: - STREAMING
> [1] [NTC] [VID] v4l2_select_input: name = "Camera 1", type 0x00000002,
> status 00000000
> [1] [NTC] [VID] v4l2_select_input: - CAMERA
> [1] [WRN] [VID] v4l2_select_input: Device doesn't support VIDIOC_G_STD
> [1] [NTC] [VID] v4l2_do_set_pix_format: Testing palette YUYV (1280x720)
> [1] [NTC] [VID] v4l2_do_set_pix_format: Using palette YUYV (1280x720)
> bytesperlines 2560 sizeimage 1843200 colorspace 00000008
> [1] [NTC] [VID] v4l2_scan_controls: found control 0x00980900,
> "Brightness", range 0,255
> [1] [NTC] [VID] v4l2_scan_controls: "Brightness", default -8193,
> current 128
> [1] [NTC] [VID] v4l2_scan_controls: found control 0x00980901,
> "Contrast", range 0,255
> [1] [NTC] [VID] v4l2_scan_controls: "Contrast", default 57343, current
> 128
> [1] [NTC] [VID] v4l2_scan_controls: found control 0x00980902,
> "Saturation", range 0,255
> [1] [NTC] [VID] v4l2_scan_controls: "Saturation", default 57343,
> current 128
> [1] [NTC] [VID] v4l2_scan_controls: found control 0x00980918, "Power
> Line Frequency", range 0,2
> [1] [NTC] [VID] v4l2_scan_controls: "Power Line Frequency", default 2,
> current 2
> [1] [NTC] [VID] v4l2_scan_controls: found control 0x00980913, "Gain",
> range 0,255
> [1] [NTC] [VID] v4l2_scan_controls: "Gain", default 57343, current 0
> [1] [NTC] [VID] vid_v4lx_start: Using V4L2
> [1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer to 1
> items
>
>
> So we're almost back to where we started with the release version but
> not quite (no avi) though hopefully you're in a better position now to
> see what we might need to change to fix my original resolution problem.
>
> Cheers, Dave
>
> On Thu, 2015-09-24 at 17:41 -0600, Mr Dave wrote:
> > Ok. That is fair. I was indicating it was good because it compiled and
> > started and that it appeared that only the parameters needed slight
> > modifications. Seeing now that it still doesn't work for you I'd
> > agree..it is still bad.
> >
> > The problem still appears to be the configuration parameters. The
> > configuration options changed significantly between the 3.12 version and
> > the versions in apt/trunk and the git version you just compiled. So
> > when you copied over your previously working version of the
> > motion.config, it has the old configuration parameter names and we need
> > to be using the new ones. (This was a change before I arrived). And
> > not only did the names change but also the parameters to specify. The
> > option of "input 8" used to mean webcam but in the latest versions, the
> > appropriate specification is now "input -1". Technically, you could go
> > through the old configuration file and change them one by one to the new
> > options and selections but with the extent of the changes, I'd recommend
> > starting with the motion-dist.conf, renaming it to motion.conf and
> > making the changes from that starting point.
> >
> > Dave
> >
> >
> > On 9/24/2015 1:52 PM, Dave Howorth wrote:
> > > I'm not having a good day, I'm afraid. I see what you say about it
> using
> > > defaults, but in that case the pre-built version works and captures
> > > video so I'm not sure how it's good that the new version doesn't?
> > >
> > > Poking about I see that it wants the config file
> > > in /usr/local/etc/motion/ so I copied the previously
> > > working /etc/motion/motion.conf there. Then I edited it so it doesn't
> > > try to start as a daemon and changed permissions so it was readable,
> but
> > > when I then start motion from the command line it says:
> > >
> > > $ motion
> > > [0] [NTC] [ALL] conf_load: Processing thread 0 - config
> > > file /usr/local/etc/motion/motion.conf
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "despeckle"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "gap"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "max_mpeg_time"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "output_all"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "output_normal"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "output_motion"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "ppm"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_cap_new"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "ffmpeg_cap_motion"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_timelapse"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> > > "ffmpeg_timelapse_mode"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "ffmpeg_bps"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> > > "ffmpeg_variable_bitrate"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> > > "ffmpeg_video_codec"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> > > "ffmpeg_deinterlace"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "locate"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "jpeg_filename"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "movie_filename"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> > > "timelapse_filename"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "webcam_port"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "webcam_quality"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "webcam_motion"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "webcam_maxrate"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "webcam_localhost"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "webcam_limit"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "control_localhost"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> > > "control_html_output"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "sql_log_image"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "sql_log_snapshot"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "sql_log_mpeg"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option
> "sql_log_timelapse"
> > > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "sql_query"
> > > [0] [NTC] [ALL] motion_startup: Using default log level (NTC) (6)
> > > [0] [NTC] [ALL] motion_startup: Motion Unofficial-Git-UNKNOWN Started
> > > [0] [NTC] [ALL] motion_startup: Logging to syslog
> > > [0] [NTC] [ALL] motion_startup: Using default log type (ALL)
> > > [0] [NTC] [ALL] motion_startup: Using log type (ALL) log level (NTC)
> > > [0] [NTC] [ALL] main: Thread 1 is from
> /usr/local/etc/motion/motion.conf
> > > [0] [NTC] [ALL] main: Thread 1 is device: /dev/video0 input 8
> > > [0] [NTC] [ALL] main: Stream port 0
> > > [0] [NTC] [ALL] main: Waiting for threads to finish, pid: 7984
> > > [1] [NTC] [ALL] motion_init: Thread 1 started , motion detection
> Enabled
> > > [1] [NTC] [VID] vid_v4lx_start: Using videodevice /dev/video0 and input
> > > 8
> > > [1] [NTC] [VID] v4l2_get_capability:
> > > ------------------------
> > > cap.driver: "uvcvideo"
> > > cap.card: "HD Pro Webcam C920"
> > > cap.bus_info: "usb-bcm2708_usb-1.2"
> > > cap.capabilities=0x04000001
> > > ------------------------
> > > [1] [NTC] [VID] v4l2_get_capability: - VIDEO_CAPTURE
> > > [1] [NTC] [VID] v4l2_get_capability: - STREAMING
> > > [1] [ERR] [VID] v4l2_select_input: Unable to query input 8.
> > > VIDIOC_ENUMINPUT, if you use a WEBCAM change input value in conf by -1:
> > > Invalid argument
> > > [1] [NTC] [VID] vid_v4lx_start: Using V4L1
> > > [1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer to 1
> > > items
> > > [1] [ERR] [ALL] motion_init: Error capturing first image
> > > [1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer to 3
> > > items
> > > [1] [ERR] [ALL] motion_loop: Video device fatal error - Closing video
> > > device
> > > [1] [NTC] [VID] vid_close: Closing video device /dev/video0
> > > [1] [WRN] [ALL] motion_loop: Retrying until successful connection with
> > > camera
> > > [1] [NTC] [VID] vid_v4lx_start: Using videodevice /dev/video0 and input
> > > 8
> > >
> > > The last stanza then repeats every few seconds until I terminate the
> > > program. I don't understand what I've done to make it not recognize the
> > > configuration options.
> > >
> > > Cheers, Dave
> > >
> > >
> > >
> > > On Wed, 2015-09-23 at 19:11 -0600, Mr Dave wrote:
> > >> OK. That is good. It looks like it is up, found your camera, started
> > >> working, detected motion. Then quit cleanly. The issue now appears
> > >> that it is within the parameters. From the log posted, it appears
> that
> > >> it is still using the defaults (see the resolution reported when it is
> > >> looking at the PIX format). So you may want to check that you changed
> > >> the right file. (Look where it installed via the messages from the
> make
> > >> install step). Also check all the other parameters like target_dir
> and
> > >> possibly try it in non-daemon mode first for testing /debugging
> > >>
> > >> Dave
> > >>
> > >>
> > >>
> > >>
> > >> On 9/23/2015 1:52 PM, Dave Howorth wrote:
> > >>> I tried autoreconf -f and it built without error. I edited the init
> > >>> script to use /etc/local/bin/motion for DAEMON and changed
> motion.conf
> > >>> to be 1280x720 and restarted the service.
> > >>>
> > >>> Sadly, it detected motion and exited but did not create any image or
> > >>> video files:
> > >>>
> > >>> Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] motion_startup:
> > >>> Using default log level (NTC) (6)
> > >>> Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] motion_startup:
> > >>> Motion Unofficial-Git-UNKNOWN Started
> > >>> Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] motion_startup:
> > >>> Logging to syslog
> > >>> Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] motion_startup:
> > >>> Using default log type (ALL)
> > >>> Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] motion_startup:
> > >>> Using log type (ALL) log level (NTC)
> > >>> Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] main: Thread 1 is
> > >>> device: /dev/video0 input -1
> > >>> Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] main: Stream
> port 0
> > >>> Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] main: Waiting for
> > >>> threads to finish, pid: 7205
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [ALL] motion_init:
> Thread
> > >>> 1 started , motion detection Enabled
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] vid_v4lx_start:
> > >>> Using videodevice /dev/video0 and input -1
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_get_capability:
> > >>> #012------------------------#012cap.driver: "uvcvideo"#012cap.card:
> "HD
> > >>> Pro Webcam C920"#012cap.bus_info:
> > >>>
> "usb-bcm2708_usb-1.2"#012cap.capabilities=0x04000001#012------------------------
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_get_capability:
> > >>> - VIDEO_CAPTURE
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_get_capability:
> > >>> - STREAMING
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_select_input:
> > >>> name = "Camera 1", type 0x00000002, status 00000000
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_select_input: -
> > >>> CAMERA
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [WRN] [VID]
> v4l2_select_input:
> > >>> Device doesn't support VIDIOC_G_STD
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_set_pix_format:
> > >>> Config palette index 17 (YU12) doesn't work.
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_set_pix_format:
> > >>> Supported palettes:
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_set_pix_format:
> > >>> (0) YUYV (YUV 4:2:2 (YUYV))
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_set_pix_format:
> > >>> 0 - YUV 4:2:2 (YUYV) (compressed : 0) (0x56595559)
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_set_pix_format:
> > >>> (1) H264 (H.264)
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_set_pix_format:
> > >>> 1 - H.264 (compressed : 1) (0x34363248)
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_set_pix_format:
> > >>> (2) MJPG (MJPEG)
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_set_pix_format:
> > >>> 2 - MJPEG (compressed : 1) (0x47504a4d)
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_set_pix_format
> > >>> Selected palette YUYV
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> > >>> v4l2_do_set_pix_format: Testing palette YUYV (352x288)
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> > >>> v4l2_do_set_pix_format: Using palette YUYV (352x288) bytesperlines
> 704
> > >>> sizeimage 202752 colorspace 00000008
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_scan_controls:
> > >>> found control 0x00980900, "Brightness", range 0,255
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_scan_controls:
> > >>> #011"Brightness", default -8193, current 128
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_scan_controls:
> > >>> found control 0x00980901, "Contrast", range 0,255
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_scan_controls:
> > >>> #011"Contrast", default 57343, current 128
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_scan_controls:
> > >>> found control 0x00980902, "Saturation", range 0,255
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_scan_controls:
> > >>> #011"Saturation", default 57343, current 128
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_scan_controls:
> > >>> found control 0x00980918, "Power Line Frequency", range 0,2
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_scan_controls:
> > >>> #011"Power Line Frequency", default 2, current 2
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_scan_controls:
> > >>> found control 0x00980913, "Gain", range 0,255
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> v4l2_scan_controls:
> > >>> #011"Gain", default 57343, current 0
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] vid_v4lx_start:
> > >>> Using V4L2
> > >>> Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [ALL]
> image_ring_resize:
> > >>> Resizing pre_capture buffer to 1 items
> > >>> Sep 23 20:37:29 raspberrypi motion: [1] [NTC] [EVT] event_new_video
> FPS
> > >>> 14
> > >>> Sep 23 20:37:29 raspberrypi motion: [1] [NTC] [ALL] motion_detected:
> > >>> Motion detected - starting event 1
> > >>> Sep 23 20:37:29 raspberrypi motion: [1] [NTC] [ALL] motion_loop:
> Thread
> > >>> exiting
> > >>> Sep 23 20:37:29 raspberrypi motion: [1] [NTC] [VID] vid_close:
> Closing
> > >>> video device /dev/video0
> > >>> Sep 23 20:37:29 raspberrypi motion: [0] [NTC] [ALL] main: Threads
> > >>> finished
> > >>> Sep 23 20:37:30 raspberrypi motion: [0] [NTC] [ALL] main: Motion
> > >>> terminating
> > >>>
> > >>>
> > >>> Also $ lsb_release -a
> > >>> No LSB modules are available.
> > >>> Distributor ID: Debian
> > >>> Description: Debian GNU/Linux 7.0 (wheezy)
> > >>> Release: 7.0
> > >>> Codename: wheezy
> > >>>
> > >>>
> > >>> Cheers, Dave
> > >>>
> > >>> On Tue, 2015-09-22 at 20:12 -0600, Mr Dave wrote:
> > >>>> I have just checked this on my PI and it appears to function
> correctly.
> > >>>>
> > >>>> Can you tell us the image that you are using so we can test it?
> > >>>>
> > >>>> Also, you may want to check the motion_guide.html and INSTALL files
> > >>>> distributed with the source code. I have updated them to have
> current
> > >>>> building/installing instructions as well as all the new and
> different
> > >>>> options. It may be as simple as using the
> > >>>>
> > >>>> autoreconf -f
> > >>>>
> > >>>> option instead of the sequence that you've indicated.
> > >>>>
> > >>>> MrDave
> > >>>>
> > >>>> On 9/22/2015 5:54 PM, Mr Dave wrote:
> > >>>>> Yes, that is definitely broken. Sorry about that. I'm pretty sure
> > >>>>> that this change is only on the unstable branch which is in
> testing.
> > >>>>> Can you switch to the master branch and test it again? The
> following
> > >>>>> switches your sources over to master which doesn't have the
> offending
> > >>>>> code but does have the changes I think you are looking for.
> > >>>>>
> > >>>>> git checkout master
> > >>>>> autoreconf
> > >>>>> ./configure
> > >>>>> make
> > >>>>> make install
> > >>>>>
> > >>>>>
> > >>>>> MrDave
> > >>>>>
> > >>>>>
> > >>>>> On 9/22/2015 4:14 PM, Dave Howorth wrote:
> > >>>>>> Thanks for that. I've just downloaded it and am trying to compile
> it but
> > >>>>>> I ran into something I don't understand. It's the first time I
> tried to
> > >>>>>> compile something on the pi. I ran:
> > >>>>>>
> > >>>>>> $ autoheader
> > >>>>>> $ autoconf configure.ac > configure
> > >>>>>> $ sudo apt-get install libjpeg-dev
> > >>>>>>
> > >>>>>> but when I
> > >>>>>> $ ./configure
> > >>>>>> it says
> > >>>>>>
> > >>>>>> checking for gcc... gcc
> > >>>>>> checking whether the C compiler works... yes
> > >>>>>> checking for C compiler default output file name... a.out
> > >>>>>> checking for suffix of executables...
> > >>>>>> checking whether we are cross compiling... no
> > >>>>>> checking for suffix of object files... o
> > >>>>>> checking whether we are using the GNU C compiler... yes
> > >>>>>> checking whether gcc accepts -g... yes
> > >>>>>> checking for gcc option to accept ISO C89... none needed
> > >>>>>> checking how to run the C preprocessor... gcc -E
> > >>>>>> checking for grep that handles long lines and -e... /bin/grep
> > >>>>>> checking for egrep... /bin/grep -E
> > >>>>>> checking for ANSI C header files... yes
> > >>>>>> checking for sys/types.h... yes
> > >>>>>> checking for sys/stat.h... yes
> > >>>>>> checking for stdlib.h... yes
> > >>>>>> checking for string.h... yes
> > >>>>>> checking for memory.h... yes
> > >>>>>> checking for strings.h... yes
> > >>>>>> checking for inttypes.h... yes
> > >>>>>> checking for stdint.h... yes
> > >>>>>> checking for unistd.h... yes
> > >>>>>> checking minix/config.h usability... no
> > >>>>>> checking minix/config.h presence... no
> > >>>>>> checking for minix/config.h... no
> > >>>>>> checking whether it is safe to define __EXTENSIONS__... yes
> > >>>>>> checking for gcc... (cached) gcc
> > >>>>>> checking whether we are using the GNU C compiler... (cached) yes
> > >>>>>> checking whether gcc accepts -g... (cached) yes
> > >>>>>> checking for gcc option to accept ISO C89... (cached) none needed
> > >>>>>> checking for Darwin... no
> > >>>>>> checking for *BSD... no
> > >>>>>> checking for gcc... (cached) gcc
> > >>>>>> checking whether we are using the GNU C compiler... (cached) yes
> > >>>>>> checking whether gcc accepts -g... (cached) yes
> > >>>>>> checking for gcc option to accept ISO C89... (cached) none needed
> > >>>>>> checking threads... yes
> > >>>>>> checking for sdl... no
> > >>>>>> checking for libjpeg-turbo... skipping
> > >>>>>> checking for libjpeg-mmx... skipping
> > >>>>>> checking for jpeg_set_defaults in -ljpeg... yes
> > >>>>>> ./configure: line 5287: syntax error near unexpected token
> `FFMPEG,'
> > >>>>>> ./configure: line 5287: ` PKG_CHECK_MODULES(FFMPEG, libavutil
> > >>>>>> libavformat libavcodec libswscale, HAVE_FFMPEG=yes)'
> > >>>>>>
> > >>>>>> A syntax error makes me think something is broken somewhere but
> I'm not
> > >>>>>> sure whether I've caused the problem?
> > >>>>>>
> > >>>>>> Cheers, Dave
> > >>>>>>
> > >>>>>>
> > >>>>>> On Fri, 2015-09-18 at 09:15 +0300, ?ydr?nas Urbonas wrote:
> > >>>>>>> Hey, try compiling latest Mr-Dave fork, it contains a fix for
> > >>>>>>> C910/C920 cameras
> > >>>>>>> https://github.com/Mr-Dave/motion/commits/unstable
> > >>>>>>>
> > >>>>>>>
> > >>>>>>> On Thu, Sep 17, 2015 at 9:03 PM, Dave Howorth <
> [email protected]>
> > >>>>>>> wrote:
> > >>>>>>> Hello,
> > >>>>>>> I'm trying to set up motion with a Logitech
> HD Pro
> > >>>>>>> Webcam C920
> > >>>>>>> connected
> > >>>>>>> to a Raspberry PI. It sort of works but not properly
> so I'd
> > >>>>>>> appreciate
> > >>>>>>> some pointers.
> > >>>>>>> The Pi has raspberrypi 3.2.27+ #250 PREEMPT
> > >>>>>>> motion is Version 3.2.12
> > >>>>>>> I'm sshed to the pi; there's no display on
> it. I
> > >>>>>>> have motion
> > >>>>>>> set up as a
> > >>>>>>> service started on boot.
> > >>>>>>> I have two issues that I'd like to resolve:
> > >>>>>>> (1) motion happily captures video
> when
> > >>>>>>> there is motion and
> > >>>>>>> records an
> > >>>>>>> avi file and a bunch of jpegs. But it only does this
> if I
> > >>>>>>> leave the
> > >>>>>>> width and height at their default. If I set 1280 x
> 720 or 1920
> > >>>>>>> x
> > >>>>>>> 1080 resolution, nothing gets captured.
> > >>>>>>> I have tried running cheese and that is able
> to show
> > >>>>>>> high-resolution
> > >>>>>>> video, so I know its not a hardware problem. There's
> a lot of
> > >>>>>>> stuff
> > >>>>>>> in /var/log/messages but I don't understand it:
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [0]
> Motion
> > >>>>>>> thread 1
> > >>>>>>> restart
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] cap.driver:
> "uvcvideo"
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] cap.card: "HD
> Pro
> > >>>>>>> Webcam C920"
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] cap.bus_info:
> > >>>>>>> "usb-bcm2708_usb-1.2"
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1]
> > >>>>>>> cap.capabilities=0x04000001
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] -
> VIDEO_CAPTURE
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] - STREAMING
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] Config
> palette index 8
> > >>>>>>> (YU12)
> > >>>>>>> doesn't work.
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] Supported
> palettes:
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] 0: YUYV (YUV
> 4:2:2
> > >>>>>>> (YUYV))
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] 1: H264
> (H.264)
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] 2: MJPG
> (MJPEG)
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] Selected
> palette YUYV
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] Test palette
> YUYV
> > >>>>>>> (1280x720)
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] Using palette
> YUYV
> > >>>>>>> (1280x720)
> > >>>>>>> bytesperlines 2560 sizeimage 1843200 colorspace
> 00000008
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] found control
> > >>>>>>> 0x00980900,
> > >>>>>>> "Brightness", range 0,255
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1]
> #011"Brightness",
> > >>>>>>> default -8193,
> > >>>>>>> current 128
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] found control
> > >>>>>>> 0x00980901,
> > >>>>>>> "Contrast", range 0,255
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1]
> #011"Contrast",
> > >>>>>>> default 57343,
> > >>>>>>> current 128
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] found control
> > >>>>>>> 0x00980902,
> > >>>>>>> "Saturation", range 0,255
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1]
> #011"Saturation",
> > >>>>>>> default 57343,
> > >>>>>>> current 128
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] found control
> > >>>>>>> 0x00980913,
> > >>>>>>> "Gain", range 0,255
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] #011"Gain",
> default
> > >>>>>>> 57343,
> > >>>>>>> current 0
> > >>>>>>> Sep 17 18:56:41 raspberrypi motion: [1] Resizing
> pre_capture
> > >>>>>>> buffer to 1
> > >>>>>>> items
> > >>>>>>> Sep 17 18:57:03 raspberrypi motion: [1] Resizing
> pre_capture
> > >>>>>>> buffer to 3
> > >>>>>>> items
> > >>>>>>> (2) motion exits if I try to access
> the
> > >>>>>>> web stream at
> > >>>>>>> http://pi:8081/.
> > >>>>>>> I'm not too concerned about this issue because it's
> not
> > >>>>>>> something I
> > >>>>>>> intend to use once it all works.
> > >>>>>>> Cheers, Dave
>
>
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
>
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------------------------------------------------------
------------------------------
_______________________________________________
Motion-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/motion-user
End of Motion-user Digest, Vol 112, Issue 30
********************************************
