Send Motion-user mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. FW: Custom motion detection (fall detection) (Julio)
2. Recommendated Motion Cameras (Markus Schr?fer)
3. Re: Recommendated Motion Cameras (Ronnie McMaster)
4. Re: zoneminder migration (Jake Stride)
----------------------------------------------------------------------
Message: 1
Date: Tue, 8 Oct 2019 18:17:30 +0200
From: Julio <[email protected]>
To: "[email protected]"
<[email protected]>
Subject: [Motion-user] FW: Custom motion detection (fall detection)
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"
Hello fellow motion?ers,
How could I plug-in a custom motion detector, to do my own image analysis
instead of generic motion?
In my case it would be fall detection for cyclists for example.
Seems like something quite common, am I missing it in the docs?
Thank you,
Julio
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 2
Date: Tue, 08 Oct 2019 22:24:27 +0200
From: Markus Schr?fer <[email protected]>
To: <[email protected]>
Subject: [Motion-user] Recommendated Motion Cameras
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"
I think a list of recommended cameras for motion usage would be really helpful.
There is a gigantic variety of cameras outside. Which one would you recommend
to connect via USB to a Raspberry3 to have the highest possible resolution (for
using usb2 and the raspberry cpu) with the highest possible viewing angle
(something near 180 degrees would be perfect). I bought a Reolink C2 Pro (IP
camera) but its really a fuzz to get this one connected to motion using RTSP ?
I was never able to get a proper picture.
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 3
Date: Tue, 8 Oct 2019 15:34:31 -0600
From: Ronnie McMaster <[email protected]>
To: Motion discussion list <[email protected]>
Subject: Re: [Motion-user] Recommendated Motion Cameras
Message-ID:
<caa8w+k4muc+wqcwx8ceoi7arys9w3hs_vzocxk+rvjy37a6...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
You're expecting a lot from free software. Motion and RaspberryPi have
nothing to do with each other. While I have used a Pi in the past, all of
my USB cameras are connected to the nearest Linux computer in the house,
which stream at their full frame rate to my server that is running Motion
as one of its services.
https://github.com/Motion-Project/motion/wiki/Supported-hardware
https://www.lavrsen.dk/foswiki/bin/view/Motion/WorkingDevices
On Tue, Oct 8, 2019 at 2:44 PM Markus Schr?fer <[email protected]> wrote:
> I think a list of recommended cameras for motion usage would be really
> helpful. There is a gigantic variety of cameras outside. Which one would
> you recommend to connect via USB to a Raspberry3 to have the highest
> possible resolution (for using usb2 and the raspberry cpu) with the highest
> possible viewing angle (something near 180 degrees would be perfect). I
> bought a Reolink C2 Pro (IP camera) but its really a fuzz to get this one
> connected to motion using RTSP ? I was never able to get a proper picture.
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 4
Date: Wed, 9 Oct 2019 05:56:14 +0800
From: Jake Stride <[email protected]>
To: Motion discussion list <[email protected]>
Subject: Re: [Motion-user] zoneminder migration
Message-ID:
<caoo87zpnbe30w+mf0qnr07ghksqvooq4gqdovoiqswojqmd...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
My setup is integrated with home assistant and node-red so I used a
combination of those tools to turn on TensorFlow for snapshots when motion
was detected with event_start/end. There was a recent topic on the list
about tensorflow so would be worth searching for that and reaching out to
the poster in there.
On Tue, 8 Oct 2019 at 17:22, Rainer Dorsch via Motion-user <
[email protected]> wrote:
> Hi Jake,
>
> how did you integrate tensorflow?
>
> Did you do a motion config which allows many false positives and then use
>
> # Command to be executed when a movie file is closed.
> ; on_movie_end value
>
> to call tensorflow to postprocess the movies and filter out the false
> positives?
>
> Or do you run all data through tensorflow?
>
> Thanks
> Rainer
>
> Am Montag, 7. Oktober 2019, 23:51:36 CEST schrieben Sie:
> > One of the things that made me move to motion from motioneye is that you
> > can put config options in motion.conf and then override then for
> individual
> > cameras so you can choose where to put options.(hence why my original
> > config is fairly light) - that's what works for me as I have two brands
> of
> > cameras.
> >
> > I run tensorflow on my cameras so have done only minor tweaking as you
> > suggest but the paragraphs after the bullet points and before Video4Linix
> > should set you on the right direction
> > https://motion-project.github.io/motion_config.html with web control and
> > other areas.
> >
> > On Tue., 8 Oct. 2019, 05:26 Rainer Dorsch via Motion-user, <
> >
> > [email protected]> wrote:
> > > I have a basic working (=cameras detecting events) system setup now. I
> > > entered
> > > the optimization phase :-)
> > >
> > > Two quick questions:
> > >
> > > I find parameters like threshold in motion.conf. From my zoneminder
> > > experience,
> > > these parameters have been heavily camera dependent (or better scene
> > > dependent
> > > recorded by a camera location and view). Is it possible to make these
> > > parameters camera specific? Can I simply add them in camera.conf?
> > >
> > > Can I collect test scenes and replay them to the parameter optimization
> > > phase?
> > >
> > > Thanks
> > > Rainer
> > >
> > > Am Montag, 7. Oktober 2019, 22:46:40 CEST schrieb Rainer Dorsch via
> > > Motion-
> > >
> > > user:
> > > > Thanks, Jake.
> > > >
> > > > My understanding is that the active camera.conf files are referenced
> in
> > > > motion.conf.
> > > >
> > > > If that is true what is in your motion.conf?
> > > >
> > > > The default has entries like the onces below, but /dev/video0 does
> not
> > >
> > > make
> > >
> > > > sense for me. Did you comment this line or don't they hurt? I assume
> at
> > > > least daemon needs to be on (?).
> > > >
> > > > ############################################################
> > > > # System control configuration parameters
> > > > ############################################################
> > > >
> > > > # Start in daemon (background) mode and release terminal.
> > > > daemon off
> > > >
> > > > # Start in Setup-Mode, daemon disabled.
> > > > setup_mode off
> > > >
> > > > # File to store the process ID.
> > > > ; pid_file value
> > > >
> > > > # File to write logs messages into. If not defined stderr and
> syslog is
> > > > used. ; log_file value
> > > >
> > > > # Level of log messages [1..9] (EMG, ALR, CRT, ERR, WRN, NTC, INF,
> DBG,
> > > > ALL). log_level 6
> > > >
> > > > # Target directory for pictures, snapshots and movies
> > > > ; target_dir value
> > > >
> > > > # Video device (e.g. /dev/video0) to be used for capturing.
> > > > videodevice /dev/video0
> > > >
> > > > # Parameters to control video device. See motion_guide.html
> > > > ; vid_control_params value
> > > >
> > > > # The full URL of the network camera stream.
> > > > ; netcam_url value
> > > >
> > > > # Name of mmal camera (e.g. vc.ril.camera for pi camera).
> > > > ; mmalcam_name value
> > > >
> > > > # Camera control parameters (see raspivid/raspistill tool
> documentation)
> > > > ; mmalcam_control_params value
> > > >
> > > > ############################################################
> > > > # Image Processing configuration parameters
> > > > ############################################################
> > > >
> > > > # Image width in pixels.
> > > > width 640
> > > >
> > > > # Image height in pixels.
> > > > height 480
> > > >
> > > > # Maximum number of frames to be captured per second.
> > > > framerate 15
> > > >
> > > > # Text to be overlayed in the lower left corner of images
> > > > text_left CAMERA1
> > > >
> > > > # Text to be overlayed in the lower right corner of images.
> > > > text_right %Y-%m-%d\n%T-%q
> > > >
> > > >
> > > > Many thanks
> > > > Rainer
> > > >
> > > > Am Montag, 7. Oktober 2019, 14:12:55 CEST schrieben Sie:
> > > > > Mine looks like this:
> > > > >
> > > > > # User defined name for the camera.
> > > > > camera_name MyCam
> > > > >
> > > > > # Numeric identifier for the camera.
> > > > > camera_id 103
> > > > >
> > > > > # The full URL of the network camera stream.
> > > > > netcam_url rtsp://xxx.xxx.xxx.xxx:8554/unicast
> > > > > netcam_userpass user:password
> > > > >
> > > > > On Mon, 7 Oct 2019 at 16:12, Rainer Dorsch via Motion-user <
> > > > >
> > > > > [email protected]> wrote:
> > > > > > Hi Jake,
> > > > > >
> > > > > > thanks for your quick reply. Do you have a network camera? If
> yes,
> > >
> > > would
> > >
> > > > > > you
> > > > > > mind to share your motion.conf and camera.conf files (as a
> example
> > >
> > > for a
> > >
> > > > > > working setup)? If you do, please do not forget to remove private
> > >
> > > data
> > >
> > > > > > like
> > > > > > passwords...
> > > > > >
> > > > > > Many thanks
> > > > > > Rainer
> > > > > >
> > > > > > Am Montag, 7. Oktober 2019, 00:28:25 CEST schrieben Sie:
> > > > > > > https://motion-project.github.io/motion_config.html is the
> best
> > >
> > > way to
> > >
> > > > > > > figure out what you need to do.
> > > > > > >
> > > > > > > I started with with motioneye that's web front end built on
> top of
> > > > > > > motion
> > > > > > > to make configuration easy. Once I had that working and saw how
> > > > > > > powerful
> > > > > >
> > > > > > it
> > > > > >
> > > > > > > was I just decided to use motion on its own.
> > > > > > >
> > > > > > > That might help you get started.
> > > > > > >
> > > > > > > On Mon., 7 Oct. 2019, 05:58 Rainer Dorsch via Motion-user, <
> > > > > > >
> > > > > > > [email protected]> wrote:
> > > > > > > > Hi,
> > > > > > > >
> > > > > > > > I used zoneminder in the past, but since it is not part of
> > >
> > > Debian 10
> > >
> > > > > > > > (buster),
> > > > > > > > I want to test motion.
> > > > > > > >
> > > > > > > > I have network cameras (HIKVISION Full HD 4MP IP
> > >
> > > DS-2CD2042WD-I), is
> > >
> > > > > > there
> > > > > >
> > > > > > > > somewhere a quick start guide which helps to get quickly a
> > >
> > > working
> > >
> > > > > > > > configuration from which I can then start optimizing? Motion
> is
> > > > > > > > a
> > > > > > > > bad
> > > > > >
> > > > > > name
> > > > > >
> > > > > > > > for
> > > > > > > > a search engine :-/
> > > > > > > >
> > > > > > > > Any advice is welcome.
> > > > > > > >
> > > > > > > > Thanks
> > > > > > > > Rainer
> > > > > > > >
> > > > > > > > --
> > > > > > > > Rainer Dorsch
> > > > > > > > http://bokomoko.de/
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > Motion-user mailing list
> > > > > > > > [email protected]
> > > > > > > > https://lists.sourceforge.net/lists/listinfo/motion-user
> > > > > > > > https://motion-project.github.io/
> > >
> > > > > > > > Unsubscribe:
> > > https://lists.sourceforge.net/lists/options/motion-user
> > >
> > > > > > --
> > > > > > Rainer Dorsch
> > > > > > http://bokomoko.de/
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > Motion-user mailing list
> > > > > > [email protected]
> > > > > > https://lists.sourceforge.net/lists/listinfo/motion-user
> > > > > > https://motion-project.github.io/
> > > > > >
> > > > > > Unsubscribe:
> https://lists.sourceforge.net/lists/options/motion-user
> > >
> > > --
> > > Rainer Dorsch
> > > http://bokomoko.de/
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Motion-user mailing list
> > > [email protected]
> > > https://lists.sourceforge.net/lists/listinfo/motion-user
> > > https://motion-project.github.io/
> > >
> > > Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
>
> --
> Rainer Dorsch
> http://bokomoko.de/
>
>
>
>
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 160, Issue 6
*******************************************
