Send Motion-user mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Corrupted picture after reconnecting to USB V4L (tosiara)
2. Re: Ubiquiti Air Cam (Mike Wilson)
3. (no subject) (Victor B?ck)
----------------------------------------------------------------------
Message: 1
Date: Thu, 31 Oct 2019 15:24:55 +0200
From: tosiara <[email protected]>
To: Motion discussion list <[email protected]>
Subject: [Motion-user] Corrupted picture after reconnecting to USB V4L
Message-ID:
<cachtdwtpofaudd7fbgpsyuyan0uniwus3v_zox2b8r9qkwk...@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Hi all,
I have created an (old) issue and will be trying to reproduce it:
https://github.com/Motion-Project/motion/issues/1054
If anyone has seen corrupted picture after USB camera disappears and
reconnects to the system - please contact me. Especially if you have
been able to reproduce it
Thanks
------------------------------
Message: 2
Date: Thu, 31 Oct 2019 10:45:15 -0400
From: Mike Wilson <[email protected]>
To: Motion discussion list <[email protected]>
Subject: Re: [Motion-user] Ubiquiti Air Cam
Message-ID:
<caaveucot6n1hrk8+scoeehkthg4way4rdx8tvd1vw9gdrjm...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Yeah, that's pretty much what I saw. I couldn't get it to decode the video
for some reason and just gave up and used the RTSP output from their video
software. I'm not proud of that. :)
On Thu, Oct 31, 2019 at 6:53 AM Richard Bown <[email protected]> wrote:
> Hi Mike
> PORT STATE SERVICE
> 22/tcp open ssh
> 80/tcp open http
> 443/tcp open https
> 1935/tcp open rtmp
> Mine has no RTSP port open either, so I have to use http on port 80.
> The app on my android phone can connect to it, I can connect to it from
> a browser,
>
> netcam_url value http://192.168.1.102
> netcam_userpass value ubnt:password
> netcam_keepalive on
>
> connecting to motion, localhost:8087
> just gives a grey block with "unable to open video device"
>
>
> the log shows
>
> tail /var/log/motion/motion.log
> [1:ml1] [NTC] [NET] [Oct 31 10:08:50] netcam_setup_html: connected,
> going on to read image.
> [1:ml1] [NTC] [NET] [Oct 31 10:08:50] netcam_read_html_jpeg:
> disconnecting netcam since keep-alive not set.
> [1:ml1] [NTC] [NET] [Oct 31 10:08:50] netcam_read_html_jpeg: leaving
> netcam connected.
> [1:ml1] [CRT] [NET] [Oct 31 10:08:50] netcam_start: libjpeg
> decompression failure on first frame - giving up!
> [1:ml1] [WRN] [ALL] [Oct 31 10:09:00] motion_loop: Retrying until
> successful connection with camera
> [1:ml1] [ALR] [NET] [Oct 31 10:09:00] netcam_start: Network Camera
> thread starting... for url (value http://192.168.1.102)
> [1:ml1] [NTC] [NET] [Oct 31 10:09:00] netcam_setup_html: connected,
> going on to read image.
> [1:ml1] [NTC] [NET] [Oct 31 10:09:00] netcam_read_html_jpeg:
> disconnecting netcam since keep-alive not set.
> [1:ml1] [NTC] [NET] [Oct 31 10:09:00] netcam_read_html_jpeg: leaving
> netcam connected.
> [1:ml1] [CRT] [NET] [Oct 31 10:09:00] netcam_start: libjpeg
> decompression failure on first frame - giving up!
>
> Any chance of a bit of help with this please
>
> On 30/10/2019 22:38, Mike Wilson wrote:
> > I couldn't get RTSP out of my Ubiquiti G3 pro cam, but I really like it.
> > I'm currently running their video software which allows exporting RTSP
> > and pointing motion at that instead of the camera. Not really efficient,
> > but it works for now. I'm not sure what my plan is for the future as
> > Ubiquiti doesn't have an API for their video software and I'm pretty set
> > on an external web page for viewing events at this point. I was hoping
> > that some of the people who were using tensorflow would respond to some
> > of the other threads so I could get motivated to make a change to
> something.
> >
> > Mike
> >
> > On Wed, Oct 30, 2019 at 5:05 PM Richard Bown <[email protected]
> > <mailto:[email protected]>> wrote:
> >
> > Hi
> > a long time since I posted on this list, so forgive if its already
> > been asked.
> > I acquired recently an Ubiquiti AirCam IP cam. searching on line , I
> > found a reference to its use on zoneminder, something a bit alien to
> > me,
> > that it uses ffmpeg .
> > Has anyone had any success getting one of these ip-cams working with
> > motion. I have tried all 17 video settings in motion.conf without
> > sucess.
> > TIA
> > --
> > Best wishes /73
> > Richard Bown
> >
> > Email : [email protected] <mailto:[email protected]>
> >
> > HTTP : http://www.g8jvm.com
> >
> >
> >
> ######################################################################
> >
> > Ham Call: G8JVM . QRV: 50-432 MHz + Microwave
> > Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W
> > QRV 6mtrs 200W, 4mtrs 150W, 2mtrs 300W, 70cms 200W,
> > Microwave 1296MHz 110W, 2320MHz 100W, 5760MHz 10W & 10368MHz 5W
> > OS: Linux Mint 19.2 x86_64 Tina, on a Dell Inspiron 3580 laptop
> >
> >
> ######################################################################
> > Come back Guy Fawkes, all is forgiven
> >
> >
> > _______________________________________________
> > Motion-user mailing list
> > [email protected]
> > <mailto:[email protected]>
> > https://lists.sourceforge.net/lists/listinfo/motion-user
> > https://motion-project.github.io/
> >
> > Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >
> >
> >
> > _______________________________________________
> > Motion-user mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/motion-user
> > https://motion-project.github.io/
> >
> > Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >
>
> --
> Best wishes /73
> Richard Bown
>
> Email : [email protected]
>
> HTTP : http://www.g8jvm.com
>
> ######################################################################
>
> Ham Call: G8JVM . QRV: 50-432 MHz + Microwave
> Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W
> QRV 6mtrs 200W, 4mtrs 150W, 2mtrs 300W, 70cms 200W,
> Microwave 1296MHz 110W, 2320MHz 100W, 5760MHz 10W & 10368MHz 5W
> OS: Linux Mint 19.2 x86_64 Tina, on a Dell Inspiron 3580 laptop
> ######################################################################
> Come back Guy Fawkes, all is forgiven
>
>
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 3
Date: Fri, 1 Nov 2019 12:52:11 +0100
From: Victor B?ck <[email protected]>
To: [email protected]
Subject: [Motion-user] (no subject)
Message-ID:
<capyuahkt74y1vdb8vr05dr+to7ymyfijr13-q4140t1yrxk...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Hey!
I was wondering how I would have 2 cameras streaming from the same device?
I haven't been able to find anything on how to do that
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 161, Issue 1
*******************************************
