Send Motion-user mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Re: Watchdog timeout (Kevin)
----------------------------------------------------------------------
Message: 1
Date: Sun, 10 May 2020 12:16:27 +1000
From: Kevin <[email protected]>
To: [email protected]
Subject: Re: [Motion-user] Watchdog timeout
Message-ID: <1964775.4TIFbQFRWI@bunyip>
Content-Type: text/plain; charset="us-ascii"
I don't think this is now necessary as the issue has (almost) been resolved -
see my earlier email.
Cheers - and thanks for your assistance,
Kevin
On 2020 M05 10, Sun 04:27:58 AEST Joris thou dist spake thusly:
> Can you please tell us what model rpi4 and camera you're using? I'll try to
> reproduce the same setup here.
>
> Op za 9 mei 2020 om 20:21 schreef Peter Cain <[email protected]>:
> > Considered the possibility that RP4 is overwhelming the IP network, and
> > not a direct problem of motion itself?
> >
> > Try just writing to local SD card?
> >
> > Reinstall motion?
> >
> > Sorry if suggesting granny suck eggs.
> >
> > On Saturday, 9 May 2020, tosiara <[email protected]> wrote:
> >> Ok, so now try change motion config to use netcam_url v4l2:///dev/video0
> >>
> >> On Sat, May 9, 2020 at 1:36 PM Kevin <[email protected]> wrote:
> >>> # ffmpeg -f video4linux2 -i /dev/video0 -vcodec copy -an -f avi
> >>> /dev/null
> >>> <snip>
> >>>
> >>> Input #0, video4linux2,v4l2, from '/dev/video0':
> >>> Duration: N/A, start: 473328.421471, bitrate: 48660 kb/s
> >>>
> >>> Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 352x288,
> >>>
> >>> 48660 kb/s, 30 fps, 30 tbr, 1000k tbn, 1000k tbc
> >>> File '/dev/null' already exists. Overwrite ? [y/N] y
> >>>
> >>> Output #0, avi, to '/dev/null':
> >>> Metadata:
> >>> ISFT : Lavf58.20.100
> >>> Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 352x288,
> >>>
> >>> q=2-31, 48660 kb/s, 30 fps, 30 tbr, 60 tbn, 60 tbc
> >>>
> >>> Stream mapping:
> >>> Stream #0:0 -> #0:0 (copy)
> >>>
> >>> Press [q] to stop, [?] for help
> >>> frame= 28 fps=0.0 q=-1.0 size= 5382kB time=00:00:03.61 biframe=
> >>> 31 fps= 31 q=-1.0 size= 5894kB time=00:00:04.10 biframe= 34 fps= 23
> >>> q=-1.0 size= 6662kB time=00:00:04.58 biframe= 36 fps= 18 q=-1.0
> >>> size= 6918kB time=00:00:05.06 biframe= 40 fps= 16 q=-1.0 size=
> >>> 7686kB time=00:00:05.53 biframe= 45 fps= 15 q=-1.0 size= 8710kB
> >>> time=00:00:06.15 biframe= 49 fps= 14 q=-1.0 size= 9478kB
> >>> time=00:00:06.63 biframe= 53 fps= 13 q=-1.0 size= 10502kB
> >>> time=00:00:07.10 biframe= 57 fps= 13 q=-1.0 size= 11270kB
> >>> time=00:00:07.58 biframe= 61 fps= 12 q=-1.0 size= 12038kB
> >>> time=00:00:08.06 biframe= 65 fps= 12 q=-1.0 size= 12806kB
> >>> time=00:00:08.66 biframe= 67 fps= 11 q=-1.0 size= 13062kB
> >>> time=00:00:09.03 biframe= 70 fps= 11 q=-1.0 size= 13830kB
> >>> time=00:00:09.63 biframe= 74 fps= 10 q=-1.0 size= 14598kB
> >>> time=00:00:10.11 biframe= 75 fps= 10 q=-1.0 Lsize= 14870kB
> >>> time=00:00:10.35 bitrate=11769.7kbits/s speed=1.41x
> >>> <ctl-c>
> >>> video:14850kB audio:0kB subtitle:0kB other streams:0kB global
> >>> headers:0kB muxing overhead: 0.135561%
> >>> Exiting normally, received signal 2.
> >>> ------------------------------
> >>> *From:* tosiara
> >>> *Sent:* Sat May 09 18:30:38 GMT+10:00 2020
> >>> *To:* Motion discussion list
> >>> *Subject:* Re: [Motion-user] Watchdog timeout
> >>>
> >>> Strange that you get the following errors while the same command works
> >>> on my machine without any issues:
> >>>
> >>> [mp4 @ 0x5a5cf0] Could not find tag for codec rawvideo in stream #0,
> >>> codec not currently supported in container
> >>> Could not write header for output file #0 (incorrect codec parameters
> >>> ?): Invalid argument
> >>>
> >>> Can you try to run a slightly changed command:
> >>>
> >>> ffmpeg -f video4linux2 -i /dev/video0 -vcodec copy -an -f avi /dev/null
> >>>
> >>> On Sat, May 9, 2020 at 9:51 AM Kevin < [email protected]> wrote:
> >>>> As requested:
> >>>>
> >>>> # ffmpeg -f video4linux2 -i /dev/video0 -vcodec copy -an -f mp4
> >>>> /dev/null
> >>>> ffmpeg version 4.1.4-1+rpt7~deb10u1 Copyright (c) 2000-2019 the FFmpeg
> >>>> developers
> >>>>
> >>>> built with gcc 8 (Raspbian 8.3.0-6+rpi1)
> >>>> configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1'
> >>>>
> >>>> --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf
> >>>> --enable-gpl
> >>>> --disable-stripping --enable-avresample --disable-filter=resample
> >>>> --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom
> >>>> --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca
> >>>> --enable-libcdio --enable-libcodec2 --enable-libflite
> >>>> --enable-libfontconfig --enable-libfreetype --enable-libfribidi
> >>>> --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame
> >>>> --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt
> >>>> --enable-libopus --enable-libpulse --enable-librsvg
> >>>> --enable-librubberband
> >>>> --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex
> >>>> --enable-libssh --enable-libtheora --enable-libtwolame
> >>>> --enable-libvidstab
> >>>> --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp
> >>>> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
> >>>> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
> >>>> --enable-opengl
> >>>> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi
> >>>> --enable-libdc1394 --enable-libdrm --enable-libiec61883
> >>>> --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared
> >>>> --libdir=/usr/lib/arm-linux-gnueabihf --cpu=arm1176jzf-s --arch=arm
> >>>>
> >>>> WARNING: library configuration mismatch
> >>>> avutil configuration: --prefix=/usr
> >>>>
> >>>> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
> >>>> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
> >>>> --disable-stripping
> >>>> --enable-avresample --disable-filter=resample --enable-avisynth
> >>>> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
> >>>> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
> >>>> --enable-libcodec2 --enable-libflite --enable-libfontconfig
> >>>> --enable-libfreetype --enable-libfribidi --enable-libgme
> >>>> --enable-libgsm
> >>>> --enable-libjack --enable-libmp3lame --enable-libmysofa
> >>>> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
> >>>> --enable-libpulse
> >>>> --enable-librsvg --enable-librubberband --enable-libshine
> >>>> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
> >>>> --enable-libtheora --enable-libtwolame --enable-libvidstab
> >>>> --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp
> >>>> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
> >>>> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
> >>>> --enable-opengl
> >>>> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi
> >>>> --enable-libdc1394 --enable-libdrm --enable-libiec61883
> >>>> --enable-chromaprint --enable-frei0r --enable-libx264
> >>>> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
> >>>> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
> >>>> --disable-programs
> >>>>
> >>>> avcodec configuration: --prefix=/usr
> >>>>
> >>>> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
> >>>> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
> >>>> --disable-stripping
> >>>> --enable-avresample --disable-filter=resample --enable-avisynth
> >>>> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
> >>>> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
> >>>> --enable-libcodec2 --enable-libflite --enable-libfontconfig
> >>>> --enable-libfreetype --enable-libfribidi --enable-libgme
> >>>> --enable-libgsm
> >>>> --enable-libjack --enable-libmp3lame --enable-libmysofa
> >>>> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
> >>>> --enable-libpulse
> >>>> --enable-librsvg --enable-librubberband --enable-libshine
> >>>> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
> >>>> --enable-libtheora --enable-libtwolame --enable-libvidstab
> >>>> --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp
> >>>> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
> >>>> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
> >>>> --enable-opengl
> >>>> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi
> >>>> --enable-libdc1394 --enable-libdrm --enable-libiec61883
> >>>> --enable-chromaprint --enable-frei0r --enable-libx264
> >>>> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
> >>>> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
> >>>> --disable-programs
> >>>>
> >>>> avformat configuration: --prefix=/usr
> >>>>
> >>>> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
> >>>> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
> >>>> --disable-stripping
> >>>> --enable-avresample --disable-filter=resample --enable-avisynth
> >>>> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
> >>>> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
> >>>> --enable-libcodec2 --enable-libflite --enable-libfontconfig
> >>>> --enable-libfreetype --enable-libfribidi --enable-libgme
> >>>> --enable-libgsm
> >>>> --enable-libjack --enable-libmp3lame --enable-libmysofa
> >>>> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
> >>>> --enable-libpulse
> >>>> --enable-librsvg --enable-librubberband --enable-libshine
> >>>> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
> >>>> --enable-libtheora --enable-libtwolame --enable-libvidstab
> >>>> --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp
> >>>> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
> >>>> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
> >>>> --enable-opengl
> >>>> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi
> >>>> --enable-libdc1394 --enable-libdrm --enable-libiec61883
> >>>> --enable-chromaprint --enable-frei0r --enable-libx264
> >>>> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
> >>>> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
> >>>> --disable-programs
> >>>>
> >>>> avdevice configuration: --prefix=/usr
> >>>>
> >>>> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
> >>>> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
> >>>> --disable-stripping
> >>>> --enable-avresample --disable-filter=resample --enable-avisynth
> >>>> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
> >>>> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
> >>>> --enable-libcodec2 --enable-libflite --enable-libfontconfig
> >>>> --enable-libfreetype --enable-libfribidi --enable-libgme
> >>>> --enable-libgsm
> >>>> --enable-libjack --enable-libmp3lame --enable-libmysofa
> >>>> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
> >>>> --enable-libpulse
> >>>> --enable-librsvg --enable-librubberband --enable-libshine
> >>>> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
> >>>> --enable-libtheora --enable-libtwolame --enable-libvidstab
> >>>> --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp
> >>>> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
> >>>> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
> >>>> --enable-opengl
> >>>> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi
> >>>> --enable-libdc1394 --enable-libdrm --enable-libiec61883
> >>>> --enable-chromaprint --enable-frei0r --enable-libx264
> >>>> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
> >>>> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
> >>>> --disable-programs
> >>>>
> >>>> avfilter configuration: --prefix=/usr
> >>>>
> >>>> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
> >>>> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
> >>>> --disable-stripping
> >>>> --enable-avresample --disable-filter=resample --enable-avisynth
> >>>> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
> >>>> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
> >>>> --enable-libcodec2 --enable-libflite --enable-libfontconfig
> >>>> --enable-libfreetype --enable-libfribidi --enable-libgme
> >>>> --enable-libgsm
> >>>> --enable-libjack --enable-libmp3lame --enable-libmysofa
> >>>> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
> >>>> --enable-libpulse
> >>>> --enable-librsvg --enable-librubberband --enable-libshine
> >>>> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
> >>>> --enable-libtheora --enable-libtwolame --enable-libvidstab
> >>>> --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp
> >>>> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
> >>>> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
> >>>> --enable-opengl
> >>>> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi
> >>>> --enable-libdc1394 --enable-libdrm --enable-libiec61883
> >>>> --enable-chromaprint --enable-frei0r --enable-libx264
> >>>> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
> >>>> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
> >>>> --disable-programs
> >>>>
> >>>> avresample configuration: --prefix=/usr
> >>>>
> >>>> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
> >>>> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
> >>>> --disable-stripping
> >>>> --enable-avresample --disable-filter=resample --enable-avisynth
> >>>> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
> >>>> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
> >>>> --enable-libcodec2 --enable-libflite --enable-libfontconfig
> >>>> --enable-libfreetype --enable-libfribidi --enable-libgme
> >>>> --enable-libgsm
> >>>> --enable-libjack --enable-libmp3lame --enable-libmysofa
> >>>> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
> >>>> --enable-libpulse
> >>>> --enable-librsvg --enable-librubberband --enable-libshine
> >>>> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
> >>>> --enable-libtheora --enable-libtwolame --enable-libvidstab
> >>>> --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp
> >>>> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
> >>>> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
> >>>> --enable-opengl
> >>>> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi
> >>>> --enable-libdc1394 --enable-libdrm --enable-libiec61883
> >>>> --enable-chromaprint --enable-frei0r --enable-libx264
> >>>> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
> >>>> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
> >>>> --disable-programs
> >>>>
> >>>> swscale configuration: --prefix=/usr
> >>>>
> >>>> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
> >>>> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
> >>>> --disable-stripping
> >>>> --enable-avresample --disable-filter=resample --enable-avisynth
> >>>> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
> >>>> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
> >>>> --enable-libcodec2 --enable-libflite --enable-libfontconfig
> >>>> --enable-libfreetype --enable-libfribidi --enable-libgme
> >>>> --enable-libgsm
> >>>> --enable-libjack --enable-libmp3lame --enable-libmysofa
> >>>> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
> >>>> --enable-libpulse
> >>>> --enable-librsvg --enable-librubberband --enable-libshine
> >>>> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
> >>>> --enable-libtheora --enable-libtwolame --enable-libvidstab
> >>>> --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp
> >>>> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
> >>>> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
> >>>> --enable-opengl
> >>>> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi
> >>>> --enable-libdc1394 --enable-libdrm --enable-libiec61883
> >>>> --enable-chromaprint --enable-frei0r --enable-libx264
> >>>> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
> >>>> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
> >>>> --disable-programs
> >>>>
> >>>> swresample configuration: --prefix=/usr
> >>>>
> >>>> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
> >>>> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
> >>>> --disable-stripping
> >>>> --enable-avresample --disable-filter=resample --enable-avisynth
> >>>> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
> >>>> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
> >>>> --enable-libcodec2 --enable-libflite --enable-libfontconfig
> >>>> --enable-libfreetype --enable-libfribidi --enable-libgme
> >>>> --enable-libgsm
> >>>> --enable-libjack --enable-libmp3lame --enable-libmysofa
> >>>> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
> >>>> --enable-libpulse
> >>>> --enable-librsvg --enable-librubberband --enable-libshine
> >>>> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
> >>>> --enable-libtheora --enable-libtwolame --enable-libvidstab
> >>>> --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp
> >>>> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
> >>>> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
> >>>> --enable-opengl
> >>>> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi
> >>>> --enable-libdc1394 --enable-libdrm --enable-libiec61883
> >>>> --enable-chromaprint --enable-frei0r --enable-libx264
> >>>> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
> >>>> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
> >>>> --disable-programs
> >>>>
> >>>> postproc configuration: --prefix=/usr
> >>>>
> >>>> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
> >>>> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
> >>>> --disable-stripping
> >>>> --enable-avresample --disable-filter=resample --enable-avisynth
> >>>> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
> >>>> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
> >>>> --enable-libcodec2 --enable-libflite --enable-libfontconfig
> >>>> --enable-libfreetype --enable-libfribidi --enable-libgme
> >>>> --enable-libgsm
> >>>> --enable-libjack --enable-libmp3lame --enable-libmysofa
> >>>> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
> >>>> --enable-libpulse
> >>>> --enable-librsvg --enable-librubberband --enable-libshine
> >>>> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
> >>>> --enable-libtheora --enable-libtwolame --enable-libvidstab
> >>>> --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp
> >>>> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
> >>>> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
> >>>> --enable-opengl
> >>>> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon --enable-rpi
> >>>> --enable-libdc1394 --enable-libdrm --enable-libiec61883
> >>>> --enable-chromaprint --enable-frei0r --enable-libx264
> >>>> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
> >>>> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
> >>>> --disable-programs
> >>>>
> >>>> libavutil 56. 22.100 / 56. 22.100
> >>>> libavcodec 58. 35.100 / 58. 35.100
> >>>> libavformat 58. 20.100 / 58. 20.100
> >>>> libavdevice 58. 5.100 / 58. 5.100
> >>>> libavfilter 7. 40.101 / 7. 40.101
> >>>> libavresample 4. 0. 0 / 4. 0. 0
> >>>> libswscale 5. 3.100 / 5. 3.100
> >>>> libswresample 3. 3.100 / 3. 3.100
> >>>> libpostproc 55. 3.100 / 55. 3.100
> >>>>
> >>>> Input #0, video4linux2,v4l2, from '/dev/video0':
> >>>> Duration: N/A, start: 459774.991048, bitrate: 48660 kb/s
> >>>>
> >>>> Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 352x288,
> >>>>
> >>>> 48660 kb/s, 30 fps, 30 tbr, 1000k tbn, 1000k tbc
> >>>> File '/dev/null' already exists. Overwrite ? [y/N] y
> >>>> [mp4 @ 0x5a5cf0] Could not find tag for codec rawvideo in stream #0,
> >>>> codec not currently supported in container
> >>>> Could not write header for output file #0 (incorrect codec parameters
> >>>> ?): Invalid argument
> >>>>
> >>>> Stream mapping:
> >>>> Stream #0:0 -> #0:0 (copy)
> >>>>
> >>>> Last message repeated 1 times
> >>>>
> >>>> ====
> >>>>
> >>>> ffmpeg -f video4linux2 -i /dev/video0 -vcodec copy -an /dev/null
> >>>> <snip>
> >>>>
> >>>> Input #0, video4linux2,v4l2, from '/dev/video0':
> >>>> Duration: N/A, start: 459920.101369, bitrate: 48660 kb/s
> >>>>
> >>>> Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 352x288,
> >>>>
> >>>> 48660 kb/s, 30 fps, 30 tbr, 1000k tbn, 1000k tbc
> >>>> [NULL @ 0x102ad90] Unable to find a suitable output format for
> >>>> '/dev/null'
> >>>> /dev/null: Invalid argument
> >>>> ------------------------------
> >>>> *From:* tosiara
> >>>> *Sent:* Sat May 09 16:22:21 GMT+10:00 2020
> >>>> *To:* Motion discussion list
> >>>> *Subject:* Re: [Motion-user] Watchdog timeout
> >>>>
> >>>> Try to run ffmpeg capture like this:
> >>>>
> >>>> ffmpeg -f video4linux2 -i /dev/video0 -vcodec copy -an -f mp4 /dev/null
> >>>>
> >>>> Let it run for a few minutes and paste the output here
> >>>>
> >>>> On Sat, May 9, 2020 at 12:24 AM Kevin < [email protected]> wrote:
> >>>>> Hi Joris,
> >>>>>
> >>>>> Firstly, the recording is to an NFS attached SSD drive. Secondly, I
> >>>>> initially tried different values for framerate - as low as three -
> >>>>> without
> >>>>> success.
> >>>>>
> >>>>> Cheers
> >>>>> Kevin
> >>>>> ------------------------------
> >>>>> *From:* Joris
> >>>>> *Sent:* Fri May 08 22:10:17 GMT+10:00 2020
> >>>>> *To:* Motion discussion list
> >>>>> *Subject:* Re: [Motion-user] Watchdog timeout
> >>>>>
> >>>>> Hi Kevin,
> >>>>>
> >>>>> This is a (very) long shot. I assume you are saving to the microsd
> >>>>> card. But it might not have the performance needed to flush all the
> >>>>> images
> >>>>> and then Weird Things (tm) can happen in the Linux kernel. There are
> >>>>> many
> >>>>> reasons cards may be slower than you expect.
> >>>>> Could you try to reduce the framerate from 100 to say 10 or 3?
> >>>>> Additionally you could run a benchmark utility like iozone and tell it
> >>>>> to
> >>>>> write representatively sized files and see how much margin the card
> >>>>> has.
> >>>>>
> >>>>> Kind regards, J
> >>>>>
> >>>>> Op vr 8 mei 2020 om 08:43 schreef Kevin < [email protected]>:
> >>>>>> 1) gdb: Motion crashed so I hoped that gdb would provide a useful
> >>>>>> backstack trace, obviously it hasn't.
> >>>>>>
> >>>>>> 2) ffmpeg: the command you gave me does not work:
> >>>>>>
> >>>>>> error: XDG_RUNTIME_DIR not set in the environment.
> >>>>>> Could not initialize SDL -
> >>>>>> (Did you set the DISPLAY variable?)
> >>>>>>
> >>>>>> All my Pi' are headless. However, if it means anything, after Motion
> >>>>>> has finished a recording, I use ffmpeg to create a timelapse version.
> >>>>>> The
> >>>>>> command I use is;
> >>>>>>
> >>>>>> ffmpeg -y -i $file -filter:v setpts=0.3*PTS -an
> >>>>>> $output_dir/${output_name}"
> >>>>>>
> >>>>>> BTW: If it will help, I'm willing to try and compile the source and
> >>>>>> use gdb to track the error - but I'd need your help to know where to
> >>>>>> place
> >>>>>> break points.
> >>>>>>
> >>>>>> I'm pretty busy right now so this would not be until some time next
> >>>>>> week. It could also take a while for me to compile the source as all
> >>>>>> my
> >>>>>> experience is with Fedora and dnf/yum.
> >>>>>> ------------------------------
> >>>>>> *From:* tosiara
> >>>>>> *Sent:* Fri May 08 15:28:15 GMT+10:00 2020
> >>>>>> *To:* Motion discussion list
> >>>>>> *Subject:* Re: [Motion-user] Watchdog timeout
> >>>>>>
> >>>>>> You did not mention that motion crashes. Can you explain the gdb log
> >>>>>> you attached?
> >>>>>>
> >>>>>> And try to run "ffplay -f video4linux2 /dev/video0" on your motion
> >>>>>> box - does it play?
> >>>>>>
> >>>>>> On Fri, May 8, 2020 at 1:15 AM Kevin < [email protected]> wrote:
> >>>>>>> Sadly, no change.
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> # rpi-eeprom-update
> >>>>>>>
> >>>>>>> BCM2711 detected
> >>>>>>>
> >>>>>>> BOOTLOADER: up-to-date
> >>>>>>>
> >>>>>>> CURRENT: Thu 16 Apr 17:11:26 UTC 2020 (1587057086)
> >>>>>>>
> >>>>>>> LATEST: Thu 16 Apr 17:11:26 UTC 2020 (1587057086)
> >>>>>>>
> >>>>>>> FW DIR: /lib/firmware/raspberrypi/bootloader/critical
> >>>>>>>
> >>>>>>> VL805: up-to-date
> >>>>>>>
> >>>>>>> CURRENT: 000137ad
> >>>>>>>
> >>>>>>> LATEST: 000137ad
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> See attachments for other "stuff".
> >>>>>>>
> >>>>>>> On 2020 M05 7, Thu 15:26:30 AEST tosiara thou dist spake thusly:
> >>>>>>> > Could you try to update to mmotion 4.3.1 as well as latest Rpi
> >>>>>>>
> >>>>>>> firmware?
> >>>>>>>
> >>>>>>> > There were similar issues with USB and Rpi in the past and usually
> >>>>>>>
> >>>>>>> firmware
> >>>>>>>
> >>>>>>> > update helped
> >>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> Motion-user mailing list
> >>>>>>> [email protected]
> >>>>>>> https://lists.sourceforge.net/lists/listinfo/motion-user
> >>>>>>> https://motion-project.github.io/
> >>>>>>>
> >>>>>>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >>>>>>>
> >>>>>> ------------------------------
> >>>>>>
> >>>>>> Motion-user mailing list
> >>>>>> [email protected]
> >>>>>> https://lists.sourceforge.net/lists/listinfo/motion-user
> >>>>>> https://motion-project.github.io/
> >>>>>>
> >>>>>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> Motion-user mailing list
> >>>>>> [email protected]
> >>>>>> https://lists.sourceforge.net/lists/listinfo/motion-user
> >>>>>> https://motion-project.github.io/
> >>>>>>
> >>>>>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >>>>>>
> >>>>> ------------------------------
> >>>>>
> >>>>> Motion-user mailing list
> >>>>> [email protected]
> >>>>> https://lists.sourceforge.net/lists/listinfo/motion-user
> >>>>> https://motion-project.github.io/
> >>>>>
> >>>>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >>>>>
> >>>>> _______________________________________________
> >>>>> Motion-user mailing list
> >>>>> [email protected]
> >>>>> https://lists.sourceforge.net/lists/listinfo/motion-user
> >>>>> https://motion-project.github.io/
> >>>>>
> >>>>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >>>>>
> >>>> ------------------------------
> >>>>
> >>>> Motion-user mailing list
> >>>> [email protected]
> >>>> https://lists.sourceforge.net/lists/listinfo/motion-user
> >>>> https://motion-project.github.io/
> >>>>
> >>>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >>>>
> >>>> _______________________________________________
> >>>> Motion-user mailing list
> >>>> [email protected]
> >>>> https://lists.sourceforge.net/lists/listinfo/motion-user
> >>>> https://motion-project.github.io/
> >>>>
> >>>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >>>>
> >>> ------------------------------
> >>>
> >>> Motion-user mailing list
> >>> [email protected]
> >>> https://lists.sourceforge.net/lists/listinfo/motion-user
> >>> https://motion-project.github.io/
> >>>
> >>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >>>
> >>> _______________________________________________
> >>> Motion-user mailing list
> >>> [email protected]
> >>> https://lists.sourceforge.net/lists/listinfo/motion-user
> >>> https://motion-project.github.io/
> >>>
> >>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >>
> >> _______________________________________________
> >
> > Motion-user mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/motion-user
> > https://motion-project.github.io/
> >
> > Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
------------------------------
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 167, Issue 16
********************************************
