Send Motion-user mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Re: illegible mp4 files (Tony Ross)
----------------------------------------------------------------------
Message: 1
Date: Mon, 25 Jan 2021 20:41:29 -0800
From: Tony Ross <[email protected]>
To: [email protected]
Subject: Re: [Motion-user] illegible mp4 files
Message-ID:
<sj0pr04mb73280ab3797b23d43198e75bde...@sj0pr04mb7328.namprd04.prod.outlook.com>
Content-Type: text/plain; charset="utf-8"; Format="flowed"
Thank you sir, you were exactly right. The movie_quality setting (100 ->
now 95) was exactly the problem.
I owe you a bowl of the soup of your choice, deliverable wordwide.
On 1/25/21 5:54 PM, MrDave wrote:
>
> FWIW:? The video played fine for me.? Not sure if that video was one
> of the problem ones or not.? It was just a little short at 0.27 seconds.
>
> I would recommend you change the movie_quality setting. Putting
> quality at 100 invokes FFmpeg to change the H264 profile to " (/High
> 4:4:4 Predictive/)".? This limits the devices/software upon which the
> video can be played back.
>
> If you have old videos that are "unplayable", you may try to transcode
> them using FFmpeg to a lower quality (CRF) to see if they are then
> viewable.
>
> The final thing I can think of is to change the container from MP4 to
> MKV and see if that resolves the issue.
>
> Dave
> On 1/25/2021 3:45 PM, Tony Ross wrote:
>> Thank you for the reply. The camera is capable of 30 fps with cat7
>> sftp (shielded foil twist pair) network cabling into a lightly-loaded
>> Tripp-Lite 8-port POE switch. RTSP using both vlc and ffplay is
>> entirely successful. Two computers both have adequate cpu; on the one
>> currently running motion:
>>
>> $ lscpu
>> Architecture:??????? x86_64
>> CPU op-mode(s):????? 32-bit, 64-bit
>> Byte Order:????????? Little Endian
>> Address sizes:?????? 39 bits physical, 48 bits virtual
>> CPU(s):????????????? 4
>> On-line CPU(s) list: 0-3
>> Thread(s) per core:? 2
>> Core(s) per socket:? 2
>> Socket(s):?????????? 1
>> NUMA node(s):??????? 1
>> Vendor ID:?????????? GenuineIntel
>> CPU family:????????? 6
>> Model:?????????????? 60
>> Model name:????????? Intel(R) Core(TM) i5-4200M CPU @ 2.50GHz
>> Stepping:??????????? 3
>> CPU MHz:???????????? 2951.756
>> CPU max MHz:???????? 3100.0000
>> CPU min MHz:???????? 800.0000
>> BogoMIPS:??????????? 4988.77
>> Virtualization:????? VT-x
>> L1d cache:?????????? 32K
>> L1i cache:?????????? 32K
>> L2 cache:??????????? 256K
>> L3 cache:??????????? 3072K
>> NUMA node0 CPU(s):?? 0-3
>> Flags:?????????????? fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
>> pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
>> pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts
>> rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq
>> dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid
>> sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c
>> rdrand lahf_lm abm cpuid_fault epb invpcid_single pti ssbd ibrs ibpb
>> stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase
>> tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt dtherm ida arat
>> pln pts md_clear flush_l1d
>>
>>
>> On 1/24/21 7:40 PM, manu.kemppainen--- via Motion-user wrote:
>>> Hi Tony,
>>>
>>> Have you tried lowering the fps or resolution for the video?
>>> Problem May be that camera/network/compute you are using are not
>>> capable to handle 30fps with high resolution.
>>> You May have to change this from the camera settings also.
>>> My 5mp camera can only produce 10fps on max resoluution.
>>>
>>> Br,
>>> Manu
>>>
>>> 25.1.2021 2.38 Tony Ross <[email protected]> kirjoitti:
>>>
>>> I apologize for providing what some might consider too much
>>> information,
>>> but here are the non-commented lines from motion.conf. Another
>>> intrusion
>>> occurred with an illegible .mp4 file that would've provided
>>> evidence:
>>>
>>> $ grep -Ev "^$|^;|^#" etc/motion/motion.conf
>>> daemon on
>>> setup_mode off
>>> log_file /home/myname/etc/motion/motion.log
>>> log_level 9
>>> log_type ALL
>>> quiet on
>>> native_language on
>>> input -1
>>> norm 0
>>> frequency 0
>>> auto_brightness 0
>>> roundrobin_frames 1
>>> roundrobin_skip 1
>>> roundrobin_switchfilter off
>>> netcam_keepalive off
>>> netcam_tolerant_check off
>>> netcam_use_tcp on
>>> minimum_frame_time 0
>>> text_right %Y-%m-%d\n%T-%q
>>> text_changes off
>>> text_scale 1
>>> text_event %Y%m%d%H%M%S
>>> emulate_motion off
>>> threshold 1500
>>> threshold_maximum 0
>>> threshold_tune off
>>> noise_level 32
>>> noise_tune on
>>> despeckle_filter EedDl
>>> smart_mask_speed 0
>>> lightswitch_percent 40
>>> lightswitch_frames 2
>>> minimum_motion_frames 2
>>> event_gap 60
>>> pre_capture 0
>>> post_capture 0
>>> picture_output best
>>> picture_output_motion off
>>> picture_type jpeg
>>> picture_quality 75
>>> picture_filename %v-%Y%m%d%H%M%S-%q
>>> snapshot_interval 0
>>> snapshot_filename lastsnap
>>> movie_output on
>>> movie_output_motion off
>>> movie_max_time 600
>>> movie_bps 400000
>>> movie_quality 100
>>> movie_codec mp4
>>> movie_duplicate_frames off
>>> movie_filename %v-%Y%m%d%H%M%S
>>> movie_extpipe_use off
>>> timelapse_interval 0
>>> timelapse_mode daily
>>> timelapse_fps 30
>>> timelapse_codec mpg
>>> timelapse_filename %Y%m%d-timelapse
>>> webcontrol_port 8080
>>> webcontrol_ipv6 off
>>> webcontrol_localhost off
>>> webcontrol_parms 2
>>> webcontrol_interface 0
>>> webcontrol_auth_method 0
>>> webcontrol_tls off
>>> stream_port 8081
>>> stream_localhost off
>>> stream_auth_method 0
>>> stream_tls off
>>> stream_preview_scale 25
>>> stream_preview_newline off
>>> stream_preview_method 0
>>> stream_quality 50
>>> stream_grey off
>>> stream_motion off
>>> stream_limit 0
>>> database_host localhost
>>> database_port 0
>>> database_busy_timeout 0
>>> sql_log_picture off
>>> sql_log_snapshot off
>>> sql_log_movie off
>>> sql_log_timelapse off
>>> track_type 0
>>> track_auto off
>>> track_motorx 0
>>> track_motorx_reverse off
>>> track_motory 0
>>> track_motory_reverse off
>>> track_maxx 0
>>> track_minx 0
>>> track_maxy 0
>>> track_miny 0
>>> track_homex 128
>>> track_homey 128
>>> track_iomojo_id 0
>>> track_step_angle_x 10
>>> track_step_angle_y 10
>>> track_move_wait 10
>>> track_speed 255
>>> track_stepsize 40
>>> camera /home/myname/etc/motion/amcrest_roof.conf
>>> camera /home/myname/etc/motion/amcrest_shop.conf
>>>
>>> On 1/21/21 3:42 PM, I wrote wrote:
>>> > Greetings, I would appreciate some help with diagnosing why
>>> mp4 files
>>> > are not properly viewable after a motion event. jpg are
>>> perfect, but
>>> > the mp4 files are 4 wide bands high, each band containing
>>> diagonally
>>> > coarse pixelations. It appears that if these diagonals were
>>> instead
>>> > vertical then a corrected video might appear.
>>> >
>>> > One camera is PTZ POE, the lower-resolution camera is PTZ
>>> WiFi. Both
>>> > cameras are configured for 30 fps H.264 output.
>>> >
>>> > RTSP streams are perfectly viewable with no errors in both vlc
>>> and
>>> > ffplay. motion.log indicates no obvious errors to me, here
>>> "killall
>>> > motion"-stopped after the first event. The .log and 2 .conf files
>>> > follow for your considerations:
>>> >
>>> > $ motion
>>> > [0:motion] [NTC] [ALL] conf_load: Processing thread 0 - config
>>> file
>>> > /home/myname/etc/motion/motion.conf
>>> > [0:motion] [NTC] [ALL] config_camera: Processing camera config
>>> file
>>> > /home/myname/etc/motion/amcrest_roof.conf
>>> > [0:motion] [NTC] [ALL] config_camera: Processing camera config
>>> file
>>> > /home/myname/etc/motion/amcrest_shop.conf
>>> > [0:motion] [NTC] [ALL] motion_startup: Logging to file
>>> > (/home/myname/etc/motion/motion.log)
>>> >
>>> > $ cat /home/myname/etc/motion/motion.log
>>> > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] motion_startup:
>>> Motion 4.3.2
>>> > Started
>>> > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] motion_startup: Using
>>> log
>>> > type (ALL) log level (ALL)
>>> > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] become_daemon: Motion
>>> going
>>> > to daemon mode
>>> > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] motion_startup: Motion
>>> > running as daemon process
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] conf_output_parms:
>>> Writing
>>> > configuration parameters from all files (3):
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] Thread 0 - Config file:
>>> > /home/myname/etc/motion/motion.conf
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] daemon on
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] setup_mode off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] pid_file
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] log_file
>>> > /home/myname/etc/motion/motion.log
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] log_level 9
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] log_type ALL
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] quiet on
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] native_language on
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] camera_name
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] camera_id 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] target_dir
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] videodevice /dev/video0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] vid_control_params
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] v4l2_palette 17
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] input -1
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] norm 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] frequency 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] auto_brightness 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] tunerdevice
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] roundrobin_frames 1
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] roundrobin_skip 1
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43]
>>> roundrobin_switchfilter off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_url
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_highres
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_userpass
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_keepalive off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_proxy
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_tolerant_check off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_use_tcp on
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_decoder
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] mmalcam_name
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] mmalcam_control_params
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] width 640
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] height 480
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] framerate 15
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] minimum_frame_time 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] rotate 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] flip_axis none
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] locate_motion_mode off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] locate_motion_style box
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] text_left
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] text_right
>>> %Y-%m-%d\n%T-%q
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] text_changes off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] text_scale 1
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] text_event %Y%m%d%H%M%S
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] emulate_motion off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] threshold 1500
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] threshold_maximum 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] threshold_tune off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] noise_level 32
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] noise_tune on
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] despeckle_filter EedDl
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] area_detect
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] mask_file
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] mask_privacy
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] smart_mask_speed 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] lightswitch_percent 40
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] lightswitch_frames 2
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] minimum_motion_frames 2
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] event_gap 60
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] pre_capture 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] post_capture 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_event_start
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_event_end
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_picture_save
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_area_detected
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_motion_detected
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_movie_start
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_movie_end
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_camera_lost
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_camera_found
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] picture_output best
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] picture_output_motion off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] picture_type jpeg
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] picture_quality 75
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] picture_exif
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] picture_filename
>>> > %v-%Y%m%d%H%M%S-%q
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] snapshot_interval 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] snapshot_filename
>>> lastsnap
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_output on
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_output_motion off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_max_time 600
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_bps 400000
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_quality 100
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_codec mp4
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43]
>>> movie_duplicate_frames off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_passthrough off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_filename
>>> %v-%Y%m%d%H%M%S
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_extpipe_use off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_extpipe
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] timelapse_interval 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] timelapse_mode daily
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] timelapse_fps 30
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] timelapse_codec mpg
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] timelapse_filename
>>> > %Y%m%d-timelapse
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] video_pipe
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] video_pipe_motion
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_port 8080
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_ipv6 off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_localhost off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_parms 2
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_interface 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_auth_method 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_authentication
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_tls off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_cert
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_key
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_cors_header
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_port 8081
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_localhost off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_auth_method 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_authentication
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_tls off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_cors_header
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_preview_scale 25
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43]
>>> stream_preview_newline off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_preview_method 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_quality 50
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_grey off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_motion off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_maxrate 1
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_limit 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] database_type
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] database_dbname
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] database_host localhost
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] database_port 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] database_user
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] database_password
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] database_busy_timeout 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] sql_log_picture off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] sql_log_snapshot off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] sql_log_movie off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] sql_log_timelapse off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] sql_query_start
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] sql_query_stop
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] sql_query
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_type 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_auto off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_port
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_motorx 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_motorx_reverse off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_motory 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_motory_reverse off
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_maxx 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_minx 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_maxy 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_miny 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_homex 128
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_homey 128
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_iomojo_id 0
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_step_angle_x 10
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_step_angle_y 10
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_move_wait 10
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_speed 255
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_stepsize 40
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_generic_move
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] camera
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] camera_dir
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] Thread 1 - Config file:
>>> > /home/myname/etc/motion/amcrest_roof.conf
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] camera_name roof
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] target_dir
>>> > /home/myname/motion/roof
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_url <redacted>
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] width 2592
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] height 1520
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] framerate 30
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] locate_motion_mode on
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] locate_motion_style
>>> redbox
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] mask_file
>>> > /home/myname/etc/motion/amcrest_2592x1520mask.pgm
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] picture_filename
>>> > stills/%Y%m%d-%H:%M:%S
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_filename
>>> > videos/%Y%m%d-%H:%M:%S
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] Thread 2 - Config file:
>>> > /home/myname/etc/motion/amcrest_shop.conf
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] camera_name shop
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] camera_id 1
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] target_dir
>>> > /home/myname/motion/shop
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_url <redacted>
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] width 1920
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] height 1080
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] framerate 30
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] locate_motion_mode on
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] locate_motion_style
>>> redbox
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] mask_file
>>> > /home/myname/etc/motion/amcrest_1920x1080mask.pgm
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] picture_filename
>>> > stills/%Y%m%d-%H:%M:%S
>>> > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_filename
>>> > videos/%Y%m%d-%H:%M:%S
>>> > [0:motion] [DBG] [ALL] [Jan 21 13:26:43] motion_ntc: v4l2?? :
>>> available
>>> > [0:motion] [DBG] [ALL] [Jan 21 13:26:43] motion_ntc: bktr?? : not
>>> > available
>>> > [0:motion] [DBG] [ALL] [Jan 21 13:26:43] motion_ntc: webp?? :
>>> available
>>> > [0:motion] [DBG] [ALL] [Jan 21 13:26:43] motion_ntc: mmal?? : not
>>> > available
>>> > [0:motion] [DBG] [ALL] [Jan 21 13:26:43] motion_ntc: ffmpeg :
>>> available
>>> > [0:motion] [DBG] [DBL] [Jan 21 13:26:43] motion_ntc: mysql? : not
>>> > available
>>> > [0:motion] [DBG] [DBL] [Jan 21 13:26:43] motion_ntc: MariaDB: not
>>> > available
>>> > [0:motion] [DBG] [DBL] [Jan 21 13:26:43] motion_ntc: sqlite3:
>>> available
>>> > [0:motion] [DBG] [DBL] [Jan 21 13:26:43] motion_ntc: pgsql? : not
>>> > available
>>> > [0:motion] [DBG] [DBL] [Jan 21 13:26:43] motion_ntc: nls??? :
>>> available
>>> > [0:motion] [ERR] [ALL] [Jan 21 13:26:43] motion_camera_ids:
>>> Camara IDs
>>> > are not unique or have values over 32,000. Falling back to thread
>>> > numbers
>>> > [0:motion] [NTC] [STR] [Jan 21 13:26:43] webu_start_strm:
>>> Starting all
>>> > camera streams on port 8081
>>> > [0:motion] [DBG] [STR] [Jan 21 13:26:43] webu_mhd_features_basic:
>>> > Basic authentication: available
>>> > [0:motion] [DBG] [STR] [Jan 21 13:26:43]
>>> webu_mhd_features_digest:
>>> > Digest authentication: available
>>> > [0:motion] [DBG] [STR] [Jan 21 13:26:43]
>>> webu_mhd_features_ipv6: IPV6:
>>> > available
>>> > [0:motion] [DBG] [STR] [Jan 21 13:26:43] webu_mhd_features_tls:
>>> > SSL/TLS: available
>>> > [0:motion] [NTC] [STR] [Jan 21 13:26:43] webu_strm_ntc:
>>> Started camera
>>> > 1 stream on port/camera_id 8081/1
>>> > [0:motion] [NTC] [STR] [Jan 21 13:26:43] webu_strm_ntc:
>>> Started camera
>>> > 2 stream on port/camera_id 8081/2
>>> > [0:motion] [NTC] [STR] [Jan 21 13:26:43] webu_start_ctrl:
>>> Starting
>>> > webcontrol on port 8080
>>> > [0:motion] [DBG] [STR] [Jan 21 13:26:43] webu_mhd_features_basic:
>>> > Basic authentication: available
>>> > [0:motion] [DBG] [STR] [Jan 21 13:26:43]
>>> webu_mhd_features_digest:
>>> > Digest authentication: available
>>> > [0:motion] [DBG] [STR] [Jan 21 13:26:43]
>>> webu_mhd_features_ipv6: IPV6:
>>> > available
>>> > [0:motion] [DBG] [STR] [Jan 21 13:26:43] webu_mhd_features_tls:
>>> > SSL/TLS: available
>>> > [0:motion] [NTC] [STR] [Jan 21 13:26:43] webu_start_ctrl: Started
>>> > webcontrol on port 8080
>>> > [0:motion] [DBG] [VID] [Jan 21 13:26:43] bktr_mutex_init: BKTR
>>> is not
>>> > enabled.
>>> > [0:motion] [NTC] [ENC] [Jan 21 13:26:43] ffmpeg_global_init:
>>> ffmpeg
>>> > libavcodec version 58.35.100 libavformat version 58.20.100
>>> > [0:motion] [DBG] [DBL] [Jan 21 13:26:43] dbse_global_init:
>>> > Initializing database
>>> > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] translate_init:
>>> Language:
>>> > English
>>> > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] motion_start_thread:
>>> Camera
>>> > ID: 1 is from /home/myname/etc/motion/amcrest_roof.conf
>>> > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] motion_start_thread:
>>> Camera
>>> > ID: 1 Camera Name: roof Service: rtsp:
>>> > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] motion_start_thread:
>>> Camera
>>> > ID: 2 is from /home/myname/etc/motion/amcrest_shop.conf
>>> > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] motion_start_thread:
>>> Camera
>>> > ID: 2 Camera Name: shop Service: rtsp:
>>> > [1:ml1:roof] [NTC] [ALL] [Jan 21 13:26:43] motion_init: Camera 1
>>> > started: motion detection Enabled
>>> > [1:ml1:roof] [NTC] [VID] [Jan 21 13:26:43] vid_start: Opening
>>> Netcam RTSP
>>> > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] main: Waiting for
>>> threads to
>>> > finish, pid: 30579
>>> > [1:ml1:roof] [INF] [NET] [Jan 21 13:26:43] netcam_rtsp_set_parms:
>>> > Setting up Normal resolution stream.
>>> > [2:ml2:shop] [NTC] [ALL] [Jan 21 13:26:43] motion_init: Camera 2
>>> > started: motion detection Enabled
>>> > [2:ml2:shop] [NTC] [VID] [Jan 21 13:26:43] vid_start: Opening
>>> Netcam RTSP
>>> > [2:ml2:shop] [INF] [NET] [Jan 21 13:26:43] netcam_rtsp_set_parms:
>>> > Setting up Normal resolution stream.
>>> > [1:ml1:roof] [INF] [NET] [Jan 21 13:26:43] netcam_rtsp_set_path:
>>> > Setting up rtsp via ffmpeg netcam
>>> > [2:ml2:shop] [INF] [NET] [Jan 21 13:26:43] netcam_rtsp_set_path:
>>> > Setting up rtsp via ffmpeg netcam
>>> > [1:ml1:roof] [INF] [NET] [Jan 21 13:26:43] netcam_rtsp_set_rtsp:
>>> > Normal resolution: Setting rtsp transport to tcp
>>> > [2:ml2:shop] [INF] [NET] [Jan 21 13:26:43] netcam_rtsp_set_rtsp:
>>> > Normal resolution: Setting rtsp transport to tcp
>>> > [1:ml1:roof] [INF] [NET] [Jan 21 13:26:43]
>>> netcam_rtsp_open_context:
>>> > Normal resolution: Opened camera(roof)
>>> > [2:ml2:shop] [INF] [NET] [Jan 21 13:26:43]
>>> netcam_rtsp_open_context:
>>> > Normal resolution: Opened camera(shop)
>>> > [1:ml1:roof] [INF] [ENC] [Jan 21 13:26:44] ffmpeg_avcodec_log:
>>> > deprecated pixel format used, make sure you did set range
>>> correctly
>>> > [1:ml1:roof] [DBG] [NET] [Jan 21 13:26:44] netcam_check_buffsize:
>>> > expanding buffer from [0/0] to [0/5910528] bytes.
>>> > [1:ml1:roof] [DBG] [NET] Above message repeats 1 times
>>> > [1:ml1:roof] [DBG] [NET] [Jan 21 13:26:44] netcam_check_buffsize:
>>> > expanding buffer from [5909760/5910528] to [5909760/11821056]
>>> bytes.
>>> > [1:ml1:roof] [NTC] [NET] [Jan 21 13:26:44]
>>> netcam_rtsp_connect: Normal
>>> > resolution: Camera (roof) connected
>>> > [1:ml1:roof] [DBG] [NET] [Jan 21 13:26:44] netcam_check_buffsize:
>>> > expanding buffer from [5909760/5910528] to [5909760/11821056]
>>> bytes.
>>> > [1:ml1:roof] [NTC] [ALL] [Jan 21 13:26:44] image_ring_resize:
>>> Resizing
>>> > pre_capture buffer to 1 items
>>> > [3:nc3:roof] [NTC] [NET] [Jan 21 13:26:44]
>>> netcam_rtsp_handler: Normal
>>> > resolution: Camera handler thread [3] started
>>> > [3:nc3:roof] [INF] [NET] [Jan 21 13:26:44]
>>> netcam_rtsp_open_context:
>>> > Normal resolution: Opened camera(roof)
>>> > [2:ml2:shop] [INF] [ENC] [Jan 21 13:26:45] ffmpeg_avcodec_log:
>>> > deprecated pixel format used, make sure you did set range
>>> correctly
>>> > [2:ml2:shop] [DBG] [NET] [Jan 21 13:26:45] netcam_check_buffsize:
>>> > expanding buffer from [0/0] to [0/3112960] bytes.
>>> > [2:ml2:shop] [DBG] [NET] Above message repeats 1 times
>>> > [2:ml2:shop] [DBG] [NET] [Jan 21 13:26:45] netcam_check_buffsize:
>>> > expanding buffer from [3110400/3112960] to [3110400/6221824]
>>> bytes.
>>> > [2:ml2:shop] [NTC] [NET] [Jan 21 13:26:45]
>>> netcam_rtsp_connect: Normal
>>> > resolution: Camera (shop) connected
>>> > [2:ml2:shop] [DBG] [NET] [Jan 21 13:26:45] netcam_check_buffsize:
>>> > expanding buffer from [3110400/3112960] to [3110400/6221824]
>>> bytes.
>>> > [2:ml2:shop] [CRT] [NET] [Jan 21 13:26:45] motion_init:
>>> Substream not
>>> > available.? Image sizes not modulo 16.
>>> > [4:nc4:shop] [NTC] [NET] [Jan 21 13:26:45]
>>> netcam_rtsp_handler: Normal
>>> > resolution: Camera handler thread [4] started
>>> > [2:ml2:shop] [NTC] [ALL] [Jan 21 13:26:45] image_ring_resize:
>>> Resizing
>>> > pre_capture buffer to 1 items
>>> > [4:nc4:shop] [INF] [NET] [Jan 21 13:26:45]
>>> netcam_rtsp_open_context:
>>> > Normal resolution: Opened camera(shop)
>>> > [3:nc3:roof] [INF] [ENC] [Jan 21 13:26:45] ffmpeg_avcodec_log:
>>> > deprecated pixel format used, make sure you did set range
>>> correctly
>>> > [3:nc3:roof] [NTC] [NET] [Jan 21 13:26:45]
>>> netcam_rtsp_connect: Normal
>>> > resolution: Camera (roof) connected
>>> > [1:ml1:roof] [INF] [ALL] [Jan 21 13:26:46] motion_init: Maskfile
>>> > "/home/myname/etc/motion/amcrest_2592x1520mask.pgm" loaded.
>>> > [1:ml1:roof] [NTC] [ALL] [Jan 21 13:26:46] image_ring_resize:
>>> Resizing
>>> > pre_capture buffer to 2 items
>>> > [4:nc4:shop] [INF] [ENC] [Jan 21 13:26:47] ffmpeg_avcodec_log:
>>> > deprecated pixel format used, make sure you did set range
>>> correctly
>>> > [4:nc4:shop] [NTC] [NET] [Jan 21 13:26:47]
>>> netcam_rtsp_connect: Normal
>>> > resolution: Camera (shop) connected
>>> > [2:ml2:shop] [INF] [ALL] [Jan 21 13:26:49] motion_init: Maskfile
>>> > "/home/myname/etc/motion/amcrest_1920x1080mask.pgm" loaded.
>>> > [2:ml2:shop] [NTC] [ALL] [Jan 21 13:26:49] image_ring_resize:
>>> Resizing
>>> > pre_capture buffer to 2 items
>>> > [1:ml1:roof] [INF] [EVT] [Jan 21 13:30:28] event_new_video:
>>> Source FPS 25
>>> > [1:ml1:roof] [INF] [ENC] [Jan 21 13:30:28] ffmpeg_set_quality:
>>> libx264
>>> > codec vbr/crf/bit_rate: 0
>>> > [1:ml1:roof] [NTC] [EVT] [Jan 21 13:30:28] event_newfile: File
>>> of type
>>> > 8 saved to: /home/myname/motion/roof/videos/20210121-13:30:28.mp4
>>> > [1:ml1:roof] [NTC] [ALL] [Jan 21 13:30:28] motion_detected:
>>> Motion
>>> > detected - starting event 1
>>> > [1:ml1:roof] [NTC] [EVT] [Jan 21 13:31:28] event_newfile: File
>>> of type
>>> > 1 saved to: /home/myname/motion/roof/stills/20210121-13:30:28.jpg
>>> > [1:ml1:roof] [NTC] [ALL] [Jan 21 13:31:28] mlp_actions: End of
>>> event 1
>>> > [2:ml2:shop] [NTC] [ALL] [Jan 21 13:31:56] mlp_actions: End of
>>> event 1
>>> > [1:ml1:roof] [NTC] [ALL] [Jan 21 13:31:56] mlp_actions: End of
>>> event 2
>>> > [2:ml2:shop] [NTC] [ALL] [Jan 21 13:31:56] motion_loop: Thread
>>> exiting
>>> > [2:ml2:shop] [INF] [ALL] [Jan 21 13:31:56] motion_cleanup:
>>> Calling
>>> > vid_close() from motion_cleanup
>>> > [2:ml2:shop] [INF] [VID] [Jan 21 13:31:56] vid_close: calling
>>> > netcam_rtsp_cleanup
>>> > [2:ml2:shop] [INF] [NET] [Jan 21 13:31:56]
>>> netcam_rtsp_cleanup: Normal
>>> > resolution: Shutting down network camera.
>>> > [1:ml1:roof] [NTC] [ALL] [Jan 21 13:31:56] motion_loop: Thread
>>> exiting
>>> > [1:ml1:roof] [INF] [ALL] [Jan 21 13:31:56] motion_cleanup:
>>> Calling
>>> > vid_close() from motion_cleanup
>>> > [1:ml1:roof] [INF] [VID] [Jan 21 13:31:56] vid_close: calling
>>> > netcam_rtsp_cleanup
>>> > [1:ml1:roof] [INF] [NET] [Jan 21 13:31:56]
>>> netcam_rtsp_cleanup: Normal
>>> > resolution: Shutting down network camera.
>>> > [4:nc4:shop] [INF] [NET] [Jan 21 13:31:56]
>>> netcam_rtsp_handler: Normal
>>> > resolution: Handler loop finished.
>>> > [4:nc4:shop] [INF] [NET] [Jan 21 13:31:56]
>>> netcam_rtsp_handler: netcam
>>> > camera handler: finish set, exiting
>>> > [3:nc3:roof] [INF] [NET] [Jan 21 13:31:56]
>>> netcam_rtsp_handler: Normal
>>> > resolution: Handler loop finished.
>>> > [3:nc3:roof] [INF] [NET] [Jan 21 13:31:56]
>>> netcam_rtsp_handler: netcam
>>> > camera handler: finish set, exiting
>>> > [2:ml2:shop] [NTC] [NET] [Jan 21 13:31:57]
>>> netcam_rtsp_cleanup: Normal
>>> > resolution: Shut down complete.
>>> > [1:ml1:roof] [NTC] [NET] [Jan 21 13:31:57]
>>> netcam_rtsp_cleanup: Normal
>>> > resolution: Shut down complete.
>>> > [0:motion] [NTC] [ALL] [Jan 21 13:31:58] main: Threads finished
>>> > [0:motion] [NTC] [ALL] [Jan 21 13:31:58] main: Motion terminating
>>> > [0:motion] [DBG] [ALL] [Jan 21 13:31:58] dbse_global_deinit:
>>> Closing
>>> > MYSQL
>>> > [0:motion] [NTC] [ALL] [Jan 21 13:31:58] motion_remove_pid:
>>> Closing
>>> > logfile (/home/myname/etc/motion/motion.log).
>>> >
>>> > $ cat /home/myname/etc/motion/amcrest_{roof,shop}.conf
>>> >
>>> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
>>> > # /home/myname/etc/motion/amcrest_roof.conf
>>> > #
>>> > # This config file was generated by motion 4.3.2
>>> > # at 2020-11-19T12:52:49
>>> >
>>> > # User defined name for the camera.
>>> > camera_name roof
>>> > camera_id 0
>>> > framerate 30
>>> >
>>> > # Target directory for pictures, snapshots and movies
>>> > target_dir /home/myname/motion/roof
>>> >
>>> > # The full URL of the network camera stream.
>>> > netcam_url
>>> >
>>> rtsp://user:[email protected]:4554/cam/realmonitor?channel=1&subtype=0
>>> >
>>> > ############################################################
>>> > # Image Processing configuration parameters
>>> > ############################################################
>>> >
>>> > # Image width in pixels.
>>> > width 2592
>>> >
>>> > # Image height in pixels.
>>> > height 1520
>>> >
>>> > # Draw a locate box around the moving object.
>>> > locate_motion_mode on
>>> >
>>> > # Set the look and style of the locate box.
>>> > locate_motion_style redbox
>>> >
>>> > # Text to be overlayed in the lower left corner of images
>>> > ;text_left amcrest_roof 0
>>> >
>>> > # Enable tuning of the threshold down if possible.
>>> > ;threshold_tune on
>>> >
>>> > # Full path and file name for motion detection mask PGM file.
>>> > mask_file /home/myname/etc/motion/amcrest_2592x1520mask.pgm
>>> >
>>> > # File name(without extension) for pictures relative to target
>>> directory
>>> > picture_filename stills/%Y%m%d-%H:%M:%S
>>> >
>>> > # File name(without extension) for movies relative to target
>>> directory
>>> > movie_filename videos/%Y%m%d-%H:%M:%S
>>> >
>>> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
>>> >
>>> >
>>> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
>>> > # /home/myname/etc/motion/amcrest_shop.conf
>>> > #
>>> > # This config file was generated by motion 4.3.2
>>> > # at 2020-11-19T12:52:49
>>> >
>>> >
>>> > # User defined name for the camera.
>>> > camera_name shop
>>> > camera_id 1
>>> > framerate 30
>>> >
>>> > # Target directory for pictures, snapshots and movies
>>> > target_dir /home/myname/motion/shop
>>> >
>>> > # The full URL of the network camera stream.
>>> > netcam_url
>>> >
>>> rtsp://user:[email protected]:4555/cam/realmonitor?channel=1&subtype=0
>>> >
>>> > ############################################################
>>> > # Image Processing configuration parameters
>>> > ############################################################
>>> >
>>> > # Image width in pixels.
>>> > width 1920
>>> >
>>> > # Image height in pixels.
>>> > height 1080
>>> >
>>> > # Draw a locate box around the moving object.
>>> > locate_motion_mode on
>>> >
>>> > # Set the look and style of the locate box.
>>> > locate_motion_style redbox
>>> >
>>> > # Text to be overlayed in the lower left corner of images
>>> > ;text_left amcrest_shop 1
>>> >
>>> > # Enable tuning of the threshold down if possible.
>>> > ;threshold_tune on
>>> >
>>> > # Full path and file name for motion detection mask PGM file.
>>> > mask_file /home/myname/etc/motion/amcrest_1920x1080mask.pgm
>>> >
>>> > # File name(without extension) for pictures relative to target
>>> directory
>>> > picture_filename stills/%Y%m%d-%H:%M:%S
>>> >
>>> > # File name(without extension) for movies relative to target
>>> directory
>>> > movie_filename videos/%Y%m%d-%H:%M:%S
>>> >
>>> #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
>>> >
>>> >
>>> >
>>> > _______________________________________________
>>> > Motion-user mailing list
>>> > [email protected]
>>> > https://lists.sourceforge.net/lists/listinfo/motion-user
>>> > https://motion-project.github.io/
>>> >
>>> > Unsubscribe:
>>> https://lists.sourceforge.net/lists/options/motion-user
>>>
>>> _______________________________________________
>>> Motion-user mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/motion-user
>>> https://motion-project.github.io/
>>>
>>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Motion-user mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/motion-user
>>> https://motion-project.github.io/
>>>
>>> Unsubscribe:https://lists.sourceforge.net/lists/options/motion-user
>>
>>
>>
>> _______________________________________________
>> Motion-user mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/motion-user
>> https://motion-project.github.io/
>>
>> Unsubscribe:https://lists.sourceforge.net/lists/options/motion-user
>
>
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 175, Issue 26
********************************************
