Send Motion-user mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. raspberry pi libcamera motion bulseye (Ed Kapitein)
2. Making cheap IP Camera work with motion (Giampiero Campa)
3. Re: Making cheap IP Camera work with motion (Andr? H?nsel)
----------------------------------------------------------------------
Message: 1
Date: Sun, 14 Nov 2021 17:14:35 +0100
From: Ed Kapitein <[email protected]>
To: [email protected]
Subject: [Motion-user] raspberry pi libcamera motion bulseye
Message-ID: <[email protected]>
Content-Type: text/plain; charset=utf-8; format=flowed
Hi,
I own a raspberry pi 3B+ and a camera v2 NOIR and use motion.
After upgrading to bullseye i had and have some difficulties to use motion.
For me it does not work "out of the box"
I needed to rename the existing cameraX-dist.conf to something else then
.conf to get motion working.
And when using /dev/video0 the FOV is smaller than it should be.
I assume the documentation needs an update.
Motion *is* working, but i assume that with libcamera? there is need of
working examples of config files with the available raspberry pi camera's.
Could someone please add a dedicated section for the raspberry pi and
the well known camera's, so we can continue to use motion with the new
setup?
Let me know if i can test anything!
Kind regards,
Ed
------------------------------
Message: 2
Date: Sun, 14 Nov 2021 20:16:55 -0500
From: Giampiero Campa <[email protected]>
To: [email protected]
Subject: [Motion-user] Making cheap IP Camera work with motion
Message-ID:
<caoh8zgpfni+3fncb4y_qcomn9psxcxws+gtkzbxiz0tir4a...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Hi All,
I have a cheap IP camera that used to work with an iphone app which has
been removed from the app store last year or so.
Recently I played with it a bit and noticed that you can connect to it (and
access the settings) via http. You can see a pretty good live image using
http://192.168.1.111/video/livesp.asp
Unfortunately I do not have much information about the formats it supports.
If you go to the settings the only information is as follows:
Device SN V200
Hardware Version 2.0
Firmware Version 1.9.8
UID CM4F5B-38A550D4CF04-74B359
Lan MAC
WiFi MAC b8:0c:0a:0c:01:cf
There is a QR code on it but if i scan it it only brings up the UID above.
A search for it does not find anything. A scan with nmap shows that port 80
seems to be the only one open.
I have been able to use motion previously with both a built-in and a USB
camera, with excellent results (thanks), but I haven't been able to make it
work with this IP camera.
I have tried stuff like the following in the config file:
netcam_url http://admin:[email protected]/video/livesp.asp
netcam_url http://192.168.1.101/video/livesp.asp?user=admin&pwd=adminpwd
netcam_keepalive on
But it cannot connect. I do not know what format it supports. I have tried
to access it using rtsp://, rtmp:// and more but no success.
Any clue to what I could do or try?
Thanks a lot in advance.
Giampiero
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 3
Date: Mon, 15 Nov 2021 02:24:13 +0100
From: Andr? H?nsel <[email protected]>
To: "'Motion discussion list'" <[email protected]>
Subject: Re: [Motion-user] Making cheap IP Camera work with motion
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"
Try connecting to it with ONVIF Device Manager. I will probably support ONVIF
and you can get the RTSP URL from it.
From: Giampiero Campa [mailto:[email protected]]
Sent: Montag, 15. November 2021 02:17
To: [email protected]
Subject: [Motion-user] Making cheap IP Camera work with motion
Hi All,
I have a cheap IP camera that used to work with an iphone app which has been
removed from the app store last year or so.
Recently I played with it a bit and noticed that you can connect to it (and
access the settings) via http. You can see a pretty good live image using
http://192.168.1.111/video/livesp.asp
Unfortunately I do not have much information about the formats it supports. If
you go to the settings the only information is as follows:
Device SN
V200
Hardware Version
2.0
Firmware Version
1.9.8
UID
CM4F5B-38A550D4CF04-74B359
Lan MAC
WiFi MAC
b8:0c:0a:0c:01:cf
There is a QR code on it but if i scan it it only brings up the UID above. A
search for it does not find anything. A scan with nmap shows that port 80 seems
to be the only one open.
I have been able to use motion previously with both a built-in and a USB
camera, with excellent results (thanks), but I haven't been able to make it
work with this IP camera.
I have tried stuff like the following in the config file:
netcam_url http://admin:[email protected]/video/livesp.asp
netcam_url http://192.168.1.101/video/livesp.asp?user=admin
<http://192.168.1.101/video/livesp.asp?user=admin&pwd=adminpwd> &pwd=adminpwd
netcam_keepalive on
But it cannot connect. I do not know what format it supports. I have tried to
access it using rtsp://, rtmp:// and more but no success.
Any clue to what I could do or try?
Thanks a lot in advance.
Giampiero
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 185, Issue 7
*******************************************
