Send Motion-user mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Foscam G4P url help please (Richard Bown)
2. Re: Foscam G4P url help please (David Powell)
3. Re: Foscam G4P url help please (Richard Bown)
----------------------------------------------------------------------
Message: 1
Date: Wed, 09 Feb 2022 19:13:25 +0000
From: Richard Bown <[email protected]>
To: [email protected]
Subject: [Motion-user] Foscam G4P url help please
Message-ID: <[email protected]>
Content-Type: text/plain; charset="UTF-8"
Hi
back again with a problem
I had a ipcam go down and I replaced it with Foscam G4P,
unfortunately it doesn't support rstp, so a case of using http with
motion.
Foscam dont support linux, a pain but their ipcams are RF quiet.
I'm stuck on the url suffix
you can see the 2 previous cameras . I can only log into this camera
with windows and it doesn't show the whole url, and as there is no rstp
support I can't check with VLC
The stream is listed as "Main stream" on the windows login,
I have tried /mainstream /Mainstream /videomain and a few others but
its not playing
in motion.conf
;netcam_url http://192.168.1.72:7777/videostream.cgi
;netcam_url rtsp://192.168.1.142:554/videoMain
netcam_url http://192.168.1.158:88/MainStream <<<<<<<<<<
In android app IP Cam Viewer it accepts
http://192.168.1.158 port 88
Has anyone got one of these working with motion
the log shows
tail /var/log/motion/motion.log
[1:ml1] [ERR] [VID] [Feb 09 19:09:10] vid_start: Netcam failed to open
[1:ml1] [WRN] [ALL] [Feb 09 19:09:10] motion_init: Could not fetch
initial image from camera
[1:ml1] [WRN] [ALL] [Feb 09 19:09:10] motion_init: Motion continues
using width and height from config file(s)
[1:ml1] [WRN] [ALL] [Feb 09 19:09:10] mlp_retry: Retrying until
successful connection with camera
[1:ml1] [CRT] [NET] [Feb 09 19:09:10] netcam_start: libjpeg
decompression failure on first frame - giving up!
[1:ml1] [ERR] [VID] [Feb 09 19:09:10] vid_start: Netcam failed to open
[1:ml1] [CRT] [NET] [Feb 09 19:09:11] netcam_start: libjpeg
decompression failure on first frame - giving up!
[1:ml1] [ERR] [VID] [Feb 09 19:09:11] vid_start: Netcam failed to open
[1:ml1] [WRN] [ALL] [Feb 09 19:09:11] motion_init: Could not fetch
initial image from camera
[1:ml1] [WRN] [ALL] [Feb 09 19:09:11] motion_init: Motion continues
using width and height from config file(s)
any ideas.
At least I was able to fix the camera that went down , so worst case I
can put that one back and just use this one somewhere it wont matter
too much
TIA
--
--
Best wishes /73
Richard Bown
Email : [email protected]
------------------------------
Message: 2
Date: Wed, 9 Feb 2022 14:34:25 -0500
From: David Powell <[email protected]>
To: Motion discussion list <[email protected]>
Subject: Re: [Motion-user] Foscam G4P url help please
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"; Format="flowed"
Try it on Linux with Opera, Chrome, or Firefox.? The camera stream is
probably MJPEG and should work with one of those browsers.
dp
On 2/9/22 2:13 PM, Richard Bown wrote:
> Hi
> back again with a problem
> I had a ipcam go down and I replaced it with Foscam G4P,
> unfortunately it doesn't support rstp, so a case of using http with
> motion.
> Foscam dont support linux, a pain but their ipcams are RF quiet.
>
> I'm stuck on the url suffix
> you can see the 2 previous cameras . I can only log into this camera
> with windows and it doesn't show the whole url, and as there is no rstp
> support I can't check with VLC
> The stream is listed as "Main stream" on the windows login,
> I have tried /mainstream /Mainstream /videomain and a few others but
> its not playing
>
> in motion.conf
> ;netcam_urlhttp://192.168.1.72:7777/videostream.cgi
> ;netcam_urlrtsp://192.168.1.142:554/videoMain
> netcam_urlhttp://192.168.1.158:88/MainStream <<<<<<<<<<
>
> In android app IP Cam Viewer it accepts
> http://192.168.1.158 port 88
>
> Has anyone got one of these working with motion
> the log shows
> tail /var/log/motion/motion.log
> [1:ml1] [ERR] [VID] [Feb 09 19:09:10] vid_start: Netcam failed to open
> [1:ml1] [WRN] [ALL] [Feb 09 19:09:10] motion_init: Could not fetch
> initial image from camera
> [1:ml1] [WRN] [ALL] [Feb 09 19:09:10] motion_init: Motion continues
> using width and height from config file(s)
> [1:ml1] [WRN] [ALL] [Feb 09 19:09:10] mlp_retry: Retrying until
> successful connection with camera
> [1:ml1] [CRT] [NET] [Feb 09 19:09:10] netcam_start: libjpeg
> decompression failure on first frame - giving up!
> [1:ml1] [ERR] [VID] [Feb 09 19:09:10] vid_start: Netcam failed to open
> [1:ml1] [CRT] [NET] [Feb 09 19:09:11] netcam_start: libjpeg
> decompression failure on first frame - giving up!
> [1:ml1] [ERR] [VID] [Feb 09 19:09:11] vid_start: Netcam failed to open
> [1:ml1] [WRN] [ALL] [Feb 09 19:09:11] motion_init: Could not fetch
> initial image from camera
> [1:ml1] [WRN] [ALL] [Feb 09 19:09:11] motion_init: Motion continues
> using width and height from config file(s)
>
> any ideas.
> At least I was able to fix the camera that went down , so worst case I
> can put that one back and just use this one somewhere it wont matter
> too much
> TIA
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 3
Date: Wed, 09 Feb 2022 20:05:57 +0000
From: Richard Bown <[email protected]>
To: [email protected]
Subject: Re: [Motion-user] Foscam G4P url help please
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"
I've tried that, and it goes straight to the camera login and complains
it needs plugins, only on windows, but of course as who ever wrote
their software doesn't realise thisas they refuse to support linux, but
they do support MAC,, not very logical :(
On Wed, 2022-02-09 at 14:34 -0500, David Powell wrote:
> Try it on Linux with Opera, Chrome, or Firefox. The camera
> stream is probably MJPEG and should work with one of those
> browsers.
>
> dp
>
>
>
> On 2/9/22 2:13 PM, Richard Bown wrote:
>
>
>
>
> > Hiback again with a problemI had a ipcam go down and I
> > replaced it with Foscam G4P, unfortunately it doesn't support rstp,
> > so a case of using http withmotion.Foscam dont support linux, a
> > pain but their ipcams are RF quiet.
> > I'm stuck on the url suffixyou can see the 2 previous cameras . I
> > can only log into this camerawith windows and it doesn't show the
> > whole url, and as there is no rstpsupport I can't check with VLCThe
> > stream is listed as "Main stream" on the windows login,I have tried
> > /mainstream /Mainstream /videomain and a few others butits not
> > playing
> > in motion.conf;netcam_url http://192.168.1.72:7777/videostream.cgi
> > ;netcam_url rtsp://192.168.1.142:554/videoMain
> > netcam_url http://192.168.1.158:88/MainStream <<<<<<<<<<
> > In android app IP Cam Viewer it accepts http://192.168.1.158 port
> > 88
> > Has anyone got one of these working with motion the log showstail
> > /var/log/motion/motion.log[1:ml1] [ERR] [VID] [Feb 09 19:09:10]
> > vid_start: Netcam failed to open[1:ml1] [WRN] [ALL] [Feb 09
> > 19:09:10] motion_init: Could not fetchinitial image from camera
> > [1:ml1] [WRN] [ALL] [Feb 09 19:09:10] motion_init: Motion
> > continuesusing width and height from config file(s)[1:ml1] [WRN]
> > [ALL] [Feb 09 19:09:10] mlp_retry: Retrying untilsuccessful
> > connection with camera[1:ml1] [CRT] [NET] [Feb 09 19:09:10]
> > netcam_start: libjpegdecompression failure on first frame - giving
> > up![1:ml1] [ERR] [VID] [Feb 09 19:09:10] vid_start: Netcam failed
> > to open[1:ml1] [CRT] [NET] [Feb 09 19:09:11] netcam_start:
> > libjpegdecompression failure on first frame - giving up![1:ml1]
> > [ERR] [VID] [Feb 09 19:09:11] vid_start: Netcam failed to
> > open[1:ml1] [WRN] [ALL] [Feb 09 19:09:11] motion_init: Could not
> > fetchinitial image from camera [1:ml1] [WRN] [ALL] [Feb 09
> > 19:09:11] motion_init: Motion continuesusing width and height from
> > config file(s)
> > any ideas.At least I was able to fix the camera that went down , so
> > worst case Ican put that one back and just use this one somewhere
> > it wont mattertoo muchTIA
> >
>
>
>
> _______________________________________________Motion-user mailing
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 188, Issue 8
*******************************************
