Hello,
While trying to connect to my isp, I get the following log :
<log>
Multi-link PPP daemon for FreeBSD
process 6912 started, version 4.1 ([EMAIL PROTECTED] 21:43 15-Jun-2007)
CONSOLE: listening on 127.0.0.1 5005
[PPPoE] using interface ng0
[l2tp1] using interface ng1
[l2tp2] using interface ng2
[l2tp3] using interface ng3
[l2tp4] using interface ng4
[l2tp5] using interface ng5
L2TP: waiting for connection on 10.127.0.1 1701
[PPPoE] link: OPEN event
[PPPoE] LCP: Open event
[PPPoE] LCP: state change Initial --> Starting
[PPPoE] LCP: LayerStart
[PPPoE] PPPoE: Connecting to '*'
PPPoE: rec'd ACNAME "BAS-ABV-2"
[PPPoE] PPPoE: connection successful
[PPPoE] link: UP event
[PPPoE] link: origination is local
[PPPoE] LCP: Up event
[PPPoE] LCP: state change Starting --> Req-Sent
[PPPoE] LCP: SendConfigReq #1
PROTOCOMP
MRU 1492
MAGICNUM ee827800
AUTHPROTO CHAP MD5
[PPPoE] LCP: rec'd Configure Request #212 link 0 (Req-Sent)
MRU 1492
AUTHPROTO CHAP MD5
MAGICNUM 258907ca
[PPPoE] LCP: SendConfigNak #212
AUTHPROTO EAP
[PPPoE] LCP: rec'd Configure Reject #1 link 0 (Req-Sent)
PROTOCOMP
[PPPoE] LCP: SendConfigReq #2
MRU 1492
MAGICNUM ee827800
AUTHPROTO CHAP MD5
[PPPoE] LCP: rec'd Configure Request #213 link 0 (Req-Sent)
MRU 1492
AUTHPROTO PAP
MAGICNUM 258907ca
[PPPoE] LCP: SendConfigNak #213
AUTHPROTO EAP
[PPPoE] LCP: rec'd Configure Ack #2 link 0 (Req-Sent)
MRU 1492
MAGICNUM ee827800
AUTHPROTO CHAP MD5
[PPPoE] LCP: state change Req-Sent --> Ack-Rcvd
[PPPoE] LCP: rec'd Configure Request #214 link 0 (Ack-Rcvd)
MRU 1492
MAGICNUM 258907ca
[PPPoE] LCP: SendConfigAck #214
MRU 1492
MAGICNUM 258907ca
[PPPoE] LCP: state change Ack-Rcvd --> Opened
[PPPoE] LCP: auth: peer wants nothing, I want CHAP
[PPPoE] CHAP: sending CHALLENGE len:46
[PPPoE] LCP: LayerUp
[PPPoE] LCP: rec'd Terminate Request #215 link 0 (Opened)
[PPPoE] LCP: state change Opened --> Stopping
[PPPoE] LCP: SendTerminateAck #3
[PPPoE] LCP: LayerDown
[PPPoE] LCP: state change Stopping --> Stopped
[PPPoE] LCP: LayerFinish
[PPPoE] link: DOWN event
[PPPoE] LCP: Close event
[PPPoE] LCP: state change Stopped --> Closed
[PPPoE] LCP: Down event
[PPPoE] LCP: state change Closed --> Initial
caught fatal signal int
[PPPoE] IPCP: Close event
[PPPoE] IFACE: Close event
[l2tp1] IPCP: Close event
[l2tp1] IFACE: Close event
[l2tp2] IPCP: Close event
[l2tp2] IFACE: Close event
[l2tp3] IPCP: Close event
[l2tp3] IFACE: Close event
[l2tp4] IPCP: Close event
[l2tp4] IFACE: Close event
[l2tp5] IPCP: Close event
[l2tp5] IFACE: Close event
[PPPoE] IPCP: Close event
[PPPoE] IFACE: Close event
[l2tp1] IPCP: Close event
[l2tp1] IFACE: Close event
[l2tp2] IPCP: Close event
[l2tp2] IFACE: Close event
[l2tp3] IPCP: Close event
[l2tp3] IFACE: Close event
[l2tp4] IPCP: Close event
[l2tp4] IFACE: Close event
[l2tp5] IPCP: Close event
[l2tp5] IFACE: Close event
process 6912 terminated
</log>
It seems that mpd wants the peer to authenticate, but nothing seems to
request peer authentication in the following conf :
<mpd.conf>
startup:
# enable TCP-Wrapper (hosts_access(5)) to block unfriendly clients
set global enable tcp-wrapper
# configure the console
set console port 5005
set console ip 127.0.0.1
set console user xxx yyy
set console open
default:
load PPPoE
load l2tp
PPPoE:
new -i ng0 PPPoE PPPoE
set iface addrs 1.1.1.1 2.2.2.2
set iface route default
set iface disable on-demand
set iface idle 0
set bundle disable multilink
set auth authname [EMAIL PROTECTED]
set link no acfcomp protocomp
set link disable pap chap
set link accept pap
set link mtu 1492
set link keep-alive 10 60
set ipcp yes vjcomp
set ipcp ranges 0.0.0.0/0 0.0.0.0/0
set iface up-script /usr/local/etc/mpd4/mpd.linkup
set iface down-script /usr/local/etc/mpd4/mpd.linkdown
open
l2tp:
load l2tp1
load l2tp2
load l2tp3
load l2tp4
load l2tp5
l2tp1:
load l2tp-template
new -i ng1 l2tp1 l2tp1
l2tp2:
load l2tp-template
new -i ng2 l2tp2 l2tp2
l2tp3:
load l2tp-template
new -i ng3 l2tp3 l2tp3
l2tp4:
load l2tp-template
new -i ng4 l2tp4 l2tp4
l2tp5:
load l2tp-template
new -i ng5 l2tp5 l2tp5
l2tp-template:
set iface disable on-demand
set iface enable proxy-arp
set iface idle 0
set iface enable tcpmssfix
set bundle disable multilink
set link yes acfcomp protocomp
set link no pap chap
set link enable chap
set link keep-alive 10 60
set link mtu 1460
set ipcp yes vjcomp
set ipcp ranges 192.168.32.10/32 192.168.32.0/24
set ipcp dns 192.168.32.10
set ipcp nbns 192.168.32.10
</mpd.conf>
<mpd.links>
PPPoE:
set link type pppoe
set pppoe iface dc1
set pppoe disable incoming
set pppoe enable originate
l2tp1:
set link type l2tp
set l2tp self 10.127.0.1
set l2tp enable incoming
set l2tp disable originate
l2tp2:
set link type l2tp
set l2tp self 10.127.0.1
set l2tp enable incoming
set l2tp disable originate
l2tp3:
set link type l2tp
set l2tp self 10.127.0.1
set l2tp enable incoming
set l2tp disable originate
l2tp4:
set link type l2tp
set l2tp self 10.127.0.1
set l2tp enable incoming
set l2tp disable originate
l2tp5:
set link type l2tp
set l2tp self 10.127.0.1
set l2tp enable incoming
set l2tp disable originate
</mpd.links>
<ifconfig -a output>
dc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet 10.93.0.46 netmask 0xffffff00 broadcast 10.93.0.255
ether 00:80:c8:cd:4f:4d
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
dc1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
ether 00:80:c8:cd:4f:4e
media: Ethernet autoselect (none)
status: active
dc2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
ether 00:80:c8:cd:4f:4f
media: Ethernet autoselect (none)
status: no carrier
dc3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
ether 00:80:c8:cd:4f:50
media: Ethernet autoselect (none)
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
pflog0: flags=0<> mtu 33208
lo1: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 10.127.0.1 netmask 0xffffff00
</ifconfig -a output>
Any idea, anyone ?
TIA
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Mpd-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/mpd-users
