On Tue, Oct 23, 2012 at 3:25 PM, Bill Hart <goodwillh...@googlemail.com> wrote:
> Is there any chance you could send me the output of make tune on
> whichever machines it actually works on (from memory you may have to
> go into the tune directory to run it). I'll also need the output of
> config.guess in each case.
Linux 2.6.18-194.11.4.el5 (Intel X5550 CPU)
gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)
ICC Version 11.0
=====================================
./config.guess
nehalem-unknown-linux-gnu
Parameters for ./mpn/x86_64/nehalem/gmp-mparam.h
Using: CPU cycle counter, supplemented by microsecond getrusage()
speed_precision 1000000, speed_unittime 3.75e-10 secs, CPU freq 2666.83 MHz
DEFAULT_MAX_SIZE 1000, fft_max_size 50000
/* Generated by tuneup.c, 2012-10-23, gcc 4.1 */
#define MUL_KARATSUBA_THRESHOLD 14
#define MUL_TOOM3_THRESHOLD 98
#define MUL_TOOM4_THRESHOLD 154
#define MUL_TOOM8H_THRESHOLD 270
#define SQR_BASECASE_THRESHOLD 0 /* always (native) */
#define SQR_KARATSUBA_THRESHOLD 27
#define SQR_TOOM3_THRESHOLD 90
#define SQR_TOOM4_THRESHOLD 248
#define SQR_TOOM8_THRESHOLD 351
#define POWM_THRESHOLD 110
#define HGCD_THRESHOLD 31
#define GCD_DC_THRESHOLD 1502
#define GCDEXT_DC_THRESHOLD 1105
#define JACOBI_BASE_METHOD 1
#define DIVREM_1_NORM_THRESHOLD MP_SIZE_T_MAX /* never */
#define DIVREM_1_UNNORM_THRESHOLD MP_SIZE_T_MAX /* never */
#define MOD_1_NORM_THRESHOLD 0 /* always */
#define MOD_1_UNNORM_THRESHOLD 0 /* always */
#define USE_PREINV_DIVREM_1 1 /* native */
#define USE_PREINV_MOD_1 1
#define DIVEXACT_1_THRESHOLD 0 /* always */
#define MODEXACT_1_ODD_THRESHOLD 0 /* always (native) */
#define MOD_1_1_THRESHOLD 5
#define MOD_1_2_THRESHOLD 8
#define MOD_1_3_THRESHOLD 25
#define DIVREM_HENSEL_QR_1_THRESHOLD 7
#define RSH_DIVREM_HENSEL_QR_1_THRESHOLD 5
#define DIVREM_EUCLID_HENSEL_THRESHOLD 105
#define ROOTREM_THRESHOLD 6
#define GET_STR_DC_THRESHOLD 13
#define GET_STR_PRECOMPUTE_THRESHOLD 20
#define SET_STR_DC_THRESHOLD 6082
#define SET_STR_PRECOMPUTE_THRESHOLD 7122
#define MUL_FFT_FULL_THRESHOLD 2880
#define SQR_FFT_FULL_THRESHOLD 2880
#define MULLOW_BASECASE_THRESHOLD 7
#define MULLOW_DC_THRESHOLD 11
#define MULLOW_MUL_THRESHOLD 2416
#define MULHIGH_BASECASE_THRESHOLD 16
#define MULHIGH_DC_THRESHOLD 16
#define MULHIGH_MUL_THRESHOLD 2416
#define MULMOD_2EXPM1_THRESHOLD 14
#define FAC_UI_THRESHOLD 1430
#define DC_DIV_QR_THRESHOLD 100
#define DC_DIVAPPR_Q_N_THRESHOLD 71
#define INV_DIV_QR_THRESHOLD 465
#define INV_DIVAPPR_Q_N_THRESHOLD 71
#define DC_DIV_Q_THRESHOLD 102
#define INV_DIV_Q_THRESHOLD 3837
#define DC_DIVAPPR_Q_THRESHOLD 73
#define INV_DIVAPPR_Q_THRESHOLD 11836
#define DC_BDIV_QR_THRESHOLD 100
#define DC_BDIV_Q_THRESHOLD 11
/* fft_tuning -- autogenerated by tune-fft */
#define FFT_TAB \
{ { 4, 3 }, { 4, 3 }, { 3, 2 }, { 2, 1 }, { 1, 0 } }
#define MULMOD_TAB \
{ 4, 4, 3, 4, 4, 3, 3, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 1, 1 }
#define FFT_N_NUM 19
#define FFT_MULMOD_2EXPP1_CUTOFF 128
/* Tuneup completed successfully, took 158 seconds */
--
You received this message because you are subscribed to the Google Groups
"mpir-devel" group.
To post to this group, send email to mpir-devel@googlegroups.com.
To unsubscribe from this group, send email to
mpir-devel+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/mpir-devel?hl=en.
