Good day, I am having a difficulty installing mpir 2.6.0 on my system. I configure it with
./configure --prefix=/home/grads/asmosuno/local/ ABI=64 --enable-cxx --enable-gmpcompat --enable-alloca=alloca --enable-assert and after "make", during "make check" the following tests fail: ... PASS: t-fat /bin/sh: line 1: 3537 Aborted "$tst" > t-gcdext.log-t 2>&1 FAIL: t-gcdext PASS: t-get_d PASS: t-hgcd PASS: t-instrument /bin/sh: line 1: 3662 Aborted "$tst" > t-inv_div_q.log-t 2>&1 FAIL: t-inv_div_q /bin/sh: line 1: 3693 Aborted "$tst" > t-inv_div_qr.log-t 2>&1 FAIL: t-inv_div_qr /bin/sh: line 1: 3724 Aborted "$tst" > t-inv_div_qr_n.log-t 2>&1 FAIL: t-inv_div_qr_n /bin/sh: line 1: 3758 Aborted "$tst" > t-inv_divappr_q.log-t 2>&1 FAIL: t-inv_divappr_q /bin/sh: line 1: 3792 Aborted "$tst" > t-inv_divappr_q_n.log-t 2>&1 FAIL: t-inv_divappr_q_n /bin/sh: line 1: 3825 Aborted "$tst" > t-invert.log-t 2>&1 FAIL: t-invert PASS: t-iord_u ... When I remove "--enable-alloca=alloca" flag, all the tests get passed successfully. The same problem persists when I use "malloc-reentrant" instead of "alloca". Here's an information on the one of the processors (other 63 are the same): -bash-4.1$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 46 model name : Intel(R) Xeon(R) CPU X7560 @ 2.27GHz stepping : 6 cpu MHz : 2261.137 cache size : 24576 KB physical id : 0 siblings : 16 core id : 0 cpu cores : 8 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 sse4_2 x2apic popcnt lahf_lm ida dts tpr_shadow vnmi flexpriority ept vpid bogomips : 4522.27 clflush size : 64 cache_alignment : 64 address sizes : 44 bits physical, 48 bits virtual power management: I would greatly appreciate your help. Sincerely, Anton -- You received this message because you are subscribed to the Google Groups "mpir-devel" group. To unsubscribe from this group and stop receiving emails from it, send an email to mpir-devel+unsubscr...@googlegroups.com. To post to this group, send email to mpir-devel@googlegroups.com. Visit this group at http://groups.google.com/group/mpir-devel. For more options, visit https://groups.google.com/groups/opt_out.