It has been a LONG time since I set up MRTG on a PM3, but the common OID that people monitor is the number of interfaces. The Ethernet interface always counts as one, so you'll need to subtract one from the gathered number.
Pete Templin IP Network Engineer TexLink Communications (210) 892-4183 [EMAIL PROTECTED] -----Original Message----- From: Mrtg [mailto:[EMAIL PROTECTED] Sent: Friday, March 07, 2003 3:56 PM To: [EMAIL PROTECTED] Subject: [mrtg] PM3 MRTG Graph incorrect Hi all, Quick question. Probably pretty dumb, but here goes.... I've got a few PM3's that I graph modem usage on.. I am using 1.3.6.1.2.1.2.1.0&1.3.6.1.2.1.2.1.0:[EMAIL PROTECTED]: for the OID. The graphs come out, but ALWAYS 1 higher than what is in use. I can actually graph a PM3 with no one on it, and it will show 1 modem in use. I believe I have delt with this before, but it has been quite awhile since I have graphed PM3's. Any ideas? Thanks, -Ronan Ronan Eckelberry Sr. Network/Systems Engineer WEBco Solutions, Inc (352)746-2500 www.webcosolutions.com -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
