Your Target line is wrong: Target[10.192.206.1_19]: 19:community206.1:
should be: Target[10.192.206.1_19]: 19:[EMAIL PROTECTED]: Greetings Eric - Italy -----Original Message----- From: Baker, Brendon [mailto:[EMAIL PROTECTED] Sent: Thursday, 03 April, 2003 7:44 To: '[EMAIL PROTECTED]' Cc: '[EMAIL PROTECTED]' Subject: [mrtg] 14all.cgi Hi Everyone I'm trying to use 14all.cgi I'm using my normal mrtg graphs as they are the ones which are pulling the data to rrdtool When i specify one of the cfg files in my web browser like so: http://scully/cgi-bin/14all.cgi?cfg=/etc/mrtg/cfg/fibres/111.cfg I get the following error: Script Error Illegal characters in cfg param: ./ This is what my cfg file looks like: ###################################################################### # System: 111 Campus FIBRE # Description: MADGE Smart Ringswitch Hardware version 8.00 Software version 4.26.00 Copyright (c) Madge Networks Ltd. 1994 # Contact: Installed 06/12/98 # Location: No.2 First Place ###################################################################### ### Interface 19 >> Descr: '' | Name: '' | Ip: '10.192.206.1' | Eth: '00-00-f6-5f-36-13' ### Target[10.192.206.1_19]: 19:community206.1: SetEnv[10.192.206.1_19]: MRTG_INT_IP="10.192.206.1" MRTG_INT_DESCR="" MaxBytes[10.192.206.1_19]: 2000000 Title[10.192.206.1_19]: Traffic Analysis for 19 -- 111 Campus FIBRE PageTop[10.192.206.1_19]: <H1>Traffic Analysis for 19 -- 111 Campus FIBRE</H1> <TABLE> <TR><TD>System:</TD> <TD>111 Campus FIBRE in No.2 First Place</TD></TR> <TR><TD>Maintainer:</TD> <TD>Installed 06/12/98</TD></TR> <TR><TD>Description:</TD><TD> </TD></TR> <TR><TD>ifType:</TD> <TD>iso88025TokenRing (9)</TD></TR> <TR><TD>ifName:</TD> <TD></TD></TR> <TR><TD>Max Speed:</TD> <TD>2000.0 kBytes/s</TD></TR> <TR><TD>Ip:</TD> <TD>10.192.206.1 ()</TD></TR> </TABLE> ### Interface 20 >> Descr: '' | Name: '' | Ip: '' | Eth: '00-00-f6-5f-36-14' ### Target[10.192.206.1_20]: 20:community206.1: SetEnv[10.192.206.1_20]: MRTG_INT_IP="" MRTG_INT_DESCR="" MaxBytes[10.192.206.1_20]: 2000000 Title[10.192.206.1_20]: Traffic Analysis for 20 -- 111 Campus FIBRE PageTop[10.192.206.1_20]: <H1>Traffic Analysis for 20 -- 111 Campus FIBRE</H1> <TABLE> <TR><TD>System:</TD> <TD>111 Campus FIBRE in No.2 First Place</TD></TR> <TR><TD>Maintainer:</TD> <TD>Installed 06/12/98</TD></TR> <TR><TD>Description:</TD><TD> </TD></TR> <TR><TD>ifType:</TD> <TD>iso88025TokenRing (9)</TD></TR> <TR><TD>ifName:</TD> <TD></TD></TR> <TR><TD>Max Speed:</TD> <TD>2000.0 kBytes/s</TD></TR> </TABLE> Can you not use your mrtg cfg's? Must I then create a new cfg everytime I add an interface to my existing cfg files? Regards Brendon ____________________________________________________________________________ _______________________ The views expressed in this email are, unless otherwise stated, those of the author and not those of the FirstRand Banking Group or its management. The information in this e-mail is confidential and is intended solely for the addressee. Access to this e-mail by anyone else is unauthorised. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted in reliance on this, is prohibited and may be unlawful. Whilst all reasonable steps are taken to ensure the accuracy and integrity of information and data transmitted electronically and to preserve the confidentiality thereof, no liability or responsibility whatsoever is accepted if information or data is, for whatever reason, corrupted or does not reach its intended destination. ________________________________ -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
