Hi Ahmed, Do you get a response from your router when you use a mib browser ? In other words, do you get any SNMP response from the router ?
The errors you mention indicate no responses received. Now if it has worked before, something must have changed. I take it, you have checked all the obvious. I had problems with my router (SMC Barricade) before. I had to reboot the router and I was able to get SNMP responses again. Hope this may help. Thanks Luz Berger -----Original Message----- From: Ahmed Soliman [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 02, 2003 11:50 AM To: [EMAIL PROTECTED] Subject: RE: [mrtg] Clarification Thanks a lot for your contribution; Yes my device is SNMP enabled, I want to tell you something: I ran this command and it worked perfect from 10 am till 4 pm yesterday,then it is stopped and gave me the mentioned problem!! What do you think????? Eng. Ahmed Soliman, National Systems Research, -----Original Message----- From: Luz Berger [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 02, 2003 11:43 AM To: 'Ahmed Soliman' Subject: RE: [mrtg] Clarification Hi Ahmed, What kind of DSL router are you using ? It must have a SNMP agent in order to be used with MRTG. Regards Luz Berger -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ahmed Soliman Sent: Wednesday, April 02, 2003 11:22 AM To: [EMAIL PROTECTED] Subject: [mrtg] Clarification Dear all, When I want to make MRTG for a DSL router ,I couldn't. From the command prompt I wrote: C:\mrtg\bin>perl cfgmaker [EMAIL PROTECTED] --global "WorkDir: c:\inetpub\wwwroot\xspeed" --output mrtgxspeed.cfg The following error appears to me: C:\mrtg\bin>perl cfgmaker [EMAIL PROTECTED] --global "WorkDir: c:\inetpub\wwwroot\xspeed" --output mrtgxspeed.cfg --base: Get Device Info on [EMAIL PROTECTED]: SNMP Error: no response received SNMPv1_Session (remote host: "194.79.97.113" [194.79.97.113].161) community: "public" request ID: -12713913 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) SNMPWALK Problem for 1.3.6.1.2.1.1 on [EMAIL PROTECTED]: What is the problem? thanks Eng. Ahmed Soliman, National Systems Research, DISCLAIMER: Sample Disclaimer ggg added in a VBScript. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi DISCLAIMER: Sample Disclaimer ggg added in a VBScript. DISCLAIMER: Sample Disclaimer ggg added in a VBScript. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
