Not sure why, but I am unable to pull data on vlans. Shows up as 0 bits when it should be showing 80+mbps.
This is on a Foundry BigIron 8000. M4R4G running 7.5.05a. Version of MRTG is 2.9.27. MRTG is polling the switch and vlan info with no errors in the log, just the graph is empty. ### Interface 612 >> Descr: 'v100' | Name: 've100' | Ip: '**.**.177.1' | Eth: '' ### Target[**.**.159.206_612]: 612:[EMAIL PROTECTED]:::::2 SetEnv[**.**.159.206_612]: MRTG_INT_IP="**.**.177.1" MRTG_INT_DESCR="v100" MaxBytes[**.**.159.206_612]: 125000000 Title[**.**.159.206_612]: Traffic Analysis for 612 -- BI8-1 PageTop[**.**.159.206_612]: <H1>Traffic Analysis for 612 -- BI8-1</H1> <TABLE> <TR><TD>System:</TD> <TD>BI8-1 in CBNS-SC</TD></TR> <TR><TD>Maintainer:</TD> <TD></TD></TR> <TR><TD>Description:</TD><TD>v100 </TD></TR> <TR><TD>ifType:</TD> <TD>Layer 2 Virtual LAN using 802.1Q (135)</TD></TR> <TR><TD>ifName:</TD> <TD>ve100</TD></TR> <TR><TD>Max Speed:</TD> <TD>0.0 bits/s</TD></TR> <TR><TD>Ip:</TD> <TD>**.**.177.1 ()</TD></TR> </TABLE> -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
