Hello Alex The thresholding script wait over 1 hour before sending an other error message.
It works like that : When MRTG detect an threshold error, it send an alert to the mailing script. Then the scrit send the message and create an file called $target_value.timeflag (ex : ethernet.timeflag) who contain the hour when the 1st error message was sent. (ex : if the mesage was sent at 5:15, the stored value will be 5) When MRTG re-detect Threshold error, the script will look up for $target_value.timeflag, and if the actual hour is the same than the stored hour, it won't send the error message. Else, if the actual hour is different from the stored hour, it will send your error message. All you need to do is just to clear the stored value ($target_value.timeflag) or to suppress the part of the script code where the it is checking the stored value. I hope it can help you ! C U Michael ----- Original Message ----- From: "Alexander Rokhlin" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, May 09, 2003 4:11 PM Subject: [mrtg] MRTG Thresholds > Hello, > > I'm new on the list, I am running MRTG as daemon with 5 min interval. > MRTG sends me only one alert for the first time interval when a > threshold was crossed. > Is there any way to configure MRTG sending threshold alerts every 5 min > until parameter is OK. > > Thanks, Alex > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/mrtg > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
