the oid you need depends on which error counter you want to monitor - walk the tree on the device to get the value you need
-----Original Message----- From: Raji Arulambalam [mailto:[EMAIL PROTECTED] Sent: Wednesday, May 14, 2003 8:46 PM To: '[MRTG List]' Subject: [mrtg] Cisco PVC counters Can you tell me how to set up MRTG to get the error values off the frame relay port. We have multiple DLCI pvcs. I am interested in the pkts dropped (in and out) and the DE counters. Gratefull if you could give me the target value. An example would be appreciated. The frame pvc port is serial 0/0 adn the DLCI is 51. The interface on the router is se 0/0.51 Thanks ****************************************************** This e-mail has been checked for viruses and no viruses were detected. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi Learn more about Paymentech's payment processing services at www.paymentech.com THIS MESSAGE IS CONFIDENTIAL. This e-mail message and any attachments are proprietary and confidential information intended only for the use of the recipient(s) named above. If you are not the intended recipient, you may not print, distribute, or copy this message or any attachments. If you have received this communication in error, please notify the sender by return e-mail and delete this message and any attachments from your computer. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
