Can you post your config to the list.

-----Original Message-----
From: Freericks,Mark [mailto:[EMAIL PROTECTED]
Sent: Friday, May 23, 2003 2:52 PM
To: Mitchell K. Smith
Subject: RE: [mrtg] MS Exhange question


Mitch,

Thanks for the response, I was able to use WS Ping Pro and do an SNMP
query on the OID in the cfg that I am using. Also, the community I not
"public" I only used that for this posting, both the read and write
community strings on the server have been changed to protect the
innocent.

Thanks,

Mark Freericks

-----Original Message-----
From: Mitchell K. Smith [mailto:[EMAIL PROTECTED] 
Sent: Friday, May 23, 2003 2:48 PM
To: Freericks,Mark; [EMAIL PROTECTED]
Subject: RE: [mrtg] MS Exhange question

Mark,
Lets start here...
Have you checked the snmp services on your Exchange server? Are they
running? Is the community string set properly? A word of advise..don't
use "public" as your string on the Exchange server. Try something a
little harder to guess.

Mitch Smith


-----Original Message-----
From: Freericks,Mark [mailto:[EMAIL PROTECTED]
Sent: Friday, May 23, 2003 2:25 PM
To: [EMAIL PROTECTED]
Subject: [mrtg] MS Exhange question


I am trying to monitor my Exchange 2000 infrastructure but am receiving
the following when I try and poll my server:
 

Received SNMP response with error code

  error status: noSuchName

  index 1 (OID: 1.3.6.1.4.1.311.1.1.3.1.1.3.1)

SNMPv1_Session (remote host: "x.x.x.x" [x.x.x.x].161)

                  community: "public"

                 request ID: -281782375

                PDU bufsize: 8000 bytes

                    timeout: 2s

                    retries: 5

                    backoff: 1)

SNMPGET Problem for .1.3.6.1.4.1.311.1.1.3.1.1.3.1
.1.3.6.1.4.1.311.1.1.3.1.1.3.1 sysUptime sysName on [EMAIL PROTECTED]

ERROR: Target[babmsgin][_IN_] ' $$target[0]{$mode} ' did not eval into
defined data

ERROR: Target[babmsgin][_OUT_] ' $$target[0]{$mode} ' did not eval into
defined data

WARNING: Skipping Update of babmsgin, inlast is not defined

WARNING: Skipping Update of babmsgin, outlast is not defined

 

Can anyone help with this? Does anyone have any working cfg files for
Exchange?

 

Any help would be greatly appreciated.

 

Mark Freericks

Network Administrator

Covanta Energy Group, Inc.

[EMAIL PROTECTED]

 


--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

Reply via email to