Hello, I am using MRTG version 2.9.17 on Redhat 7.3.
I am coming across an interesting problem, in one of my configs where I use the '+' operator to add together several interfaces (33 interfaces actually) when the combined data rate reaches about 14M BYTES /sec it seems to go crazy and loop around to zero or similar. I have a attached a resultant image of what it looks like when it happens. The time around wednesday is evidence of what I am talking about. I am really confused on this one, I assume that MRTG can handle more than 14MBYTES/sec so I thought it may be that the addition logic limits the range of the values that can be added. 14MBYTES is really close to 2^30 bits. I seem to get accurate graphs up to the point where it goes past about 14MBYTES/sec. An advice would be appreciated. Cheers, SB -- Stephen Baxter Director - PIPE Networks phone : 07 3220 1100/ 0417 818 695 fax : 07 3220 1800 ______________________________________ PIPE Networks/IX Services Australia disclaimer The above email should be read in conjunction with our standard disclaimer/terms which can be found at : http://www.pipenetworks.com/docs/disclaimer.htm -- Attached file removed by Ecartis and put at URL below -- -- Type: IMAGE/png -- Size: 4k (4573 bytes) -- URL : http://www.ee.ethz.ch/~slist/p/total-week.png -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi