This is what I use... It seems to work on my 3550's... Options[proxima_cpu]:gauge,growright Target[proxima_cpu]: 1.3.6.1.4.1.9.2.1.58.0&1.3.6.1.4.1.9.2.1.58.0:[EMAIL PROTECTED] MaxBytes[proxima_cpu]: 100 Title[proxima_cpu]: proxima CPU PageTop[proxima_cpu]: <H1>proxima CPU usage (%)</H1> YLegend[proxima_cpu]: CPU Utilization
I don't have any suggestions for the etherchannel... -Stephen -----Original Message----- From: Patricia A. Malinowski [mailto:[EMAIL PROTECTED] Sent: Thursday, September 04, 2003 1:16 PM To: [EMAIL PROTECTED] Subject: [mrtg] 3550 CPU and etherchannel Hello all, I have searched through the MRTG archive(s) to determine which OID/MIB to use for monitoring the CPU on each 3550 and the traffic on our etherchannel between two Cisco 3550's. I've found varying OID's being used. Therefore, I'm asking if someone can shed some light on this subject. I've found the following OID's being used for CPU monitoring: 1.3.6.1.4.1.9.9.109.1.1.1.1.4.1&1.3.6.1.4.1.9.9.109.1.1.1.1.5.1 If I do a snmpget on the above, I receive nothing. 1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.1.58.0 1.3.6.1.4.1.9.9.48.1.1.1.6.1&1.3.6.1.4.1.9.9.48.1.1.1.7.1(for memory monitoring) I cannot locate the OID for the etherchannel monitoring, but I'm still searching. If anyone can help, I'd appreciate it! Thanks. -Patricia -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
