Moses Hernandez wrote: > I have started using mrtg on a win32 test box. It has been running for 5 > days on the core router 6500 router side, two remote connect routers and the > internet firewall. Today I configured the 6500 gigabit switchports to also > get snmp info. I have noticed not much traffic above the 640.0 K usage, > maybe 1.2M. I am using mrtg 2.10.15 and I thought it was a versioning issue > but noticed some others in the archive had similar issues though no > resolution. As an aside the low numbers are showing up on my nokia firewalls > and the numbers are kind of inconsistance with the bandwidth stats from my > isp.
Are those numbers in bits or bytes? Do you think the numbers are low because you've compared them to what the switch is logging? Compare MRTG's output with what a "sh int xx" gives you, and keep in mind the proper bits/bytes conversion. If there truly is a discrepancy then you may want to post the relevant portions of your CFG file so that we may be able to help you further. Take a look at your maxbytes setting too. HTH, Eric Brander -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
